|
| 1 | SCHEDULE \"A\" PART-I (BUILDING WORK ) |
| 2 | Dismantling of wall, flooring,and ceiling boards (Fibre, pulp, insulation, etc) or insulation boards/slab/blankets, any thickness including cover fillets complete all as specified and directed. |
| 3 | M&L for prelaminated wooden flooring with08 mm thick particle board planks with tongue and grove joints of size as directed over 10 mm thick thermocoal sheet set with adhesive of approved make as per manufacturer instruction over finsih surface complete all as specified and directed. |
| 4 | M&L 2nd class hard wood plain fillets square/rectangular or tringular in section of sectional area exc 06 Sqcm but n exc 13 Sqcm but bullnosed splayed chamfered or rounded on one edge or face and fixed with nails complete all as specified and directed. |
| 5 | Dismantling existing unservicable floor/wall tiles of any description including bedding/screed layer all as specifed. |
| 6 | M&L Vitrified tiles light shade 9 to 10 mm thick (Square or rectangular ) polished , area of each tilesexc 0.36 sqmbut not exe0.42 sqm , in floors etclaid over 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed. |
| 7 | S&F in repair 5mm thick looking mirror of selected quality with and including stainless steel spacers and bevelled edgeany size as directed by Engg-in-charge |
| 8 | M&L for post anti-termite treatment of existing floors using emulsion at the rate of one litre per hole 200 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match with the existing floors all as specified and directed by Engr in Charge. |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 10 | M&L 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in sub base of tiles floor finished etc complete all as specified and directed by Engr in charge. |
| 11 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including incl 15 mm thick screed bed orbedding layers of cement mortar 1:6 to matchShade, pattern, laying etc of tiles as directed at site rubbing and polishing complete all as specified and directed. |
| 12 | Descriptionall as per item no 1.10 but as in skirting complete all as specified and directed. |
| 13 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store |
| 14 | Taking down chowkats or frames exc 1.5 sqm but n exc 4.0 Sqm each with shutters (without taking off shutter from the frame) and removing to or from store |
| 15 | M&L for factory made Box type steel hollow square section outer frame and shutter frame windows with side hung shutters including grill 10 mm square bar welded to FI frame, 4 mm thick flat iron welded to frame, 10 mm hallow square sectionwith rubber gasketscrewed to frame,hinges with steel handles, two Nos of tower bolts etc complete with factory priming coat of red oxide.drg no ; CEAF/AR-554/2017/SW dt 02/08/17 sheet no 1/1. |
| 16 | S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butthinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified. |
| 17 | S&F 35mm thick factory made Flush Shutters, solid core construction, withpre-laminated particle board, exterior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed.complete all as spd. |
| 18 | S&F Anodised Aluminium frame work of for door, windows and ventilators and partition wall including panel of doors and windows with one or more rebates fixed in position as per manufacturer\"s instruction including necessary joining cleat, glazing clips, rubber packing, beading etc complete all as specified and directed. |
| 19 | S&F 5mm thick sheet glass ordinary quality along with EPDM rubber all around the glass edges n exc 0.50 Sqm in each pane and fixed to Aluminium framed work complete all as specified and as directed. |
| 20 | M&L 12mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on both faces,fixed with screws to timber frame-work complete all as specified and directed. |
| 21 | S&F Solar control film 50-micron thick reflective type, sticked to glass panel as per manufacturer’s instruction all as specified and directed. |
| 22 | S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed. |
| 23 | M & L for Stainless steel drapery rodin repair, with of dianot less than 25mm with brackets on both end of rod and two nos globe on both ends for each door/windows . Brackets shall be at stainless steel 1.6mm thick complete all as specified and directed. |
| 24 | S&F in repairs of door closer aluminum (die cast) body, hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed |
| 25 | Supply and fixing in repair aluminum anodized barrel tower bolt of extruded section 200 mm long complete all as specified (ISI Marked). |
| 26 | Supply and fixing in repair MS butt hinges medium weight cold rolled 100 mm ISI marked complete all as specified incl. required welding etc in repairs. |
| 27 | Supply and fixing in repair aluminum alloy handle 150 mm size cast type complete all as specified . |
| 28 | Supply and fixing aluminum anodized sliding door bolts 250 mm long with hasp and staple (bold type) complete all as specified (ISI Marked) fixed in repair |
| 29 | RCC 1:2:4 type B-1 (20 mm graded stone agg) as in plinth beam, lintel lintel and similar suspended work including necessary form work etc complete all as specified and directed. |
| 30 | TMT steel bars of 10mm dia and over for reinforcement, cut to length, bend to shape reguired including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia complete all as specified and directed. |
| 31 | TMT steel bars of 5mm to 8 mm dia and over and including 10mm dia as in stirrups, spacer and binders, cut to length, bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(anneled) not less than 0.9mm dia complete all as specified and directed. |
| 32 | Formwork to sides and soffits offloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc beams also play as between fllor and beams complete all as specified and directed. |
| 33 | Brick work with sub class \"B\" bricks (old size bricks) straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 34 | Taking down cement plaster of any description including racking out joint hacking for key scribing down with water etc complete all as specified. |
| 35 | Material and labour for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge. |
| 36 | M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | M&L rendering 5 mmthick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed. |
| 38 | S & F in repairs 12 mmthick gypsum ceiling board fixed with screws on and including Galvanized ironsnap grid frame workwith section of size 24mm x 38mm x 0.7mm thick \"T; section and 25mm x 25mm x 0.35mm thick wall cleat of angle section and 4mm dia galvanised iron wire supported with 4mm thick grid of size 600mm x 600mm shall be fixed to GI grid of above section with MS screws as per manufacturing instructions includingtwo coats of oil bound distemper over a coat of primer incuding making holes, cutting chasis & making good disturb surfaces in CM 1:3 of PCC 1:2:4 type B1 as per existing finish complete all as specified. |
| 39 | M&L preparation of new plastered surfaces of wall priming with alkali primer and applying two coats of cement based paint complete all as specified and directed. |
| 40 | Preparation ofnew plastered surfaces of wall and applyingtwo coats of oil bound distemperover a coatprimer and 3mm wall putty complete all as spd. |
| 41 | Preparation of old plastered surfaces of wall and applying two coat of cement base paint over a coat of alkali primer incl complete removal of existing treatmentcomplete all as specified and directed. |
| 42 | Preparation of old plastered surfaces of ceiling and applying one coat of white wash onceilingcomplete all as specified and directed. |
| 43 | Preparation of old plastered surfaces of ceiling andapplying one coat of Distemper oil emulsion any tint on walls, filling gaps by putty after washing rubbing down and stopping of distempered surfacescomplete all as specified and directed. |
| 44 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 45 | M&L for preparation of new plastered surfaces of ceiling aply 3mm wall care putty and applying three coats of white washcomplete all as specified and directed. |
| 46 | Excavating over areas, n exc 1.5 m deep and gettinggetting in soft and loose soilcomplete all as specified and directed. |
| 47 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed by Engineer-in-Charge. |
| 48 | M&L Hard core of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to true surfacecomplete all as specified and directed. |
| 49 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregatecomplete all as specified and directed. |
| 50 | M&L for 100mm thick PCC 1:2:4 type B-1(Using 20mm graded crushed stone aggregate) as in floor,hard standing surfaces finished even and smooth without using extra cement including use and waste of formwwork fair or rounding or chamfered of exposed edges all as specified and directed. |
| 51 | Forming construction (Dummy) joints 65mmx10mm wide field with sealing compound grade Acomplete all as specified and directed. |
| 52 | Forming 12 mm thick expansion joint filled with performed bituminous filler and top 30mm primed and sealed with sealing compound, grade \"A\" 150mm thick concrete slabcomplete all as specified and directed. |
| 53 | M&L PCC (1:2:4 ) type B 1 using 20 mm graded crushed stone agg as in coping etc including fom work complete all as spfd & directed. |
| 54 | Removing excavated soil exc. 50m but n exc 100m & depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified and directed. |
| 55 | Structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in- Charge. |
| 56 | Structural mild steel rolled sections Fe 410-W (Gde-E- 250) quality A, as inpurlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer-in-charge. |
| 57 | Structural rolled mild steel sections Fe 410 W (Gde E- 250) qualiy A as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, etc. complete all as specified and as directed by Engineer-in-charge. |
| 58 | Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other end, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 10cm and not exceeding 15cm long and dia of neck 11 mm to 15mm complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Fixing onlyGIcorrugated/profiled steel sheet as in roof covering/cladding to wall, fixed with and including self tapping screws complete all as specified and as directed by Engr-in-Charge. ( Sheet will given by user) |
| 60 | Structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in- Charge. |
| 61 | Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt not exceeding 25mm in length complete, all as specified and as directed by Engr-in-Charge. |
| 62 | Preparation of new or previously untreated steel or steel based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 63 | Surface dressing n. exc 15cm deep any type of soil complete all as specified and directed. |
| 64 | M&L cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate in foundations, filling and mass concrete necessary form work completer all as sp[ecified and directed. |
| 65 | S&F rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc similar work conforming to Fe 410 Gde E-250 quality B necessary drilling work complete all as specified and directed. |
| 66 | S&F framed brackets of angles or tree with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary gusset plates, riveting, etc n exc 10 Kg each brackets, confirming to Fe 290 Gde E-165 including necessary portion welded or drilling work complete all as specified and directed. |
| 67 | Preparation of steel or iron surfaces of any dexcription, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 68 | S&F Gun metal gate valve 20mm, cast iron copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and directed. |
| 69 | S&F rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with threaded cap and fixed in position all specified in SSR Part-I of capacity 2000 litres each including all accessories (i.e. GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete rall as specified and directed. |
| 70 | S&F 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminiumrod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram), complete all as specified and directed. |
| 71 | M&L for 15mm dia bore galvanised mild steel water tubing \"medium grade\" together with all fittings, (ISI marked) such elbows, bends tees, nipples, union sockets, sockets etc and short piece and fixed complete to walls and ceilings or laid in floors, complete all specified and directed. |
| 72 | M&L for 20mm dia bore galvanised mild steel water tubing \"medium grade\" together with all fittings, (ISI marked) such elbows, bends tees, nipples, union sockets, sockets etc and short piece and fixed complete to walls and ceilings or laid in floors, complete all specified and directed. |
| 73 | Demolition of brick / stone masonry built in cement mortar and remove the site complete all as specified and directed. |
| 74 | Rendering 15mm thick on fair faces of brick work or concrete surfaces, other than fair faces (without using extra cement) on walls in cement mortar 1:4 including WPC complete all as specified and directed.Note Supply onlywater proofing compound shall be measured and paid separately. |
| 75 | Rendering 10mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:6 including WPC complete all as specified and directed.Note:- WPC shall be measred and paid separately. |
| 76 | M&L finishing walls with acrylic smooth exterior paint of required shade and matching old surface on same pattern. New work (Two or more coat applied @1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @2.20kg/10 Sqm) complete rall specified and directed. |
| 77 | M&L for preparation of new plastered surfaces and applying two coats of approved shade with matching old surface of oil emulsion distemper on walls over a coat of primer complete all specified and directed. |
| 78 | M&L for Granite work 18-20mm thick (Table rubbed and polished) in cooking platforms over 10mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 79 | Supply only integral water proofing compound ISI marked. |
| 80 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene beeding/packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading screws etc with complete necessary fittings all asspecified and directed. |
| 81 | S&F for 5.50mm thick frosted sheet glass ordinary quality and glazing with oil putty/wooden beads with nails in square not exceeding 0.5 Square metre in each pane etc. complete all as specified and directed. |
| 82 | SCHEDULE \"A\" PART-I (INTERNAL ELECTRIFICATION WORK ) |
| 83 | Point wiring for one lightpoint/ fan point controlled by one switch with 1.5 sqmm FRLS PVC insulated unsheathed copper condector single core multi strand flexible cable and 1.5 Sqmm flrs PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduitmedium grade withall fittings ( ISI marked ) controlled by one switch including CI/MS sunk box required size & as directed by Engr-in-Charge &3 mm thick plastic laminated sheet, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed. |
| 84 | One light point controlled by one switch. |
| 85 | One wall fan/Exhaust fan/ceiling fan point controlled by one switch. |
| 86 | One 3 pin socket outlet point 5 Amps on independent, with cables 2.5 sq. mm size . |
| 87 | One 3 Pin socket outlet point 5 Amps on the same board with other switches. |
| 88 | One 3 pin socket outlet point 15 Amps on independent, with cables 2.5 sq. mm size . |
| 89 | Supply and fixing for energy saving environmental friendly, LED tubelight fittings 20 watts 1200 mm(Aluminium body) long life, impact proof, surface/wall mounting IP 20, 95 luminaries per watt, extruded aluminium housing with frosted PMPA diffuser high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size with ceiling rosecomplete all as specified and directed. |
| 90 | S & F Socket outlet flush universal modular (piano) type 6 pin 6/16 Ampswith suitable plate and cover complete all as specified and directed. |
| 91 | S & F Switch Modular (piano) flush button single pole one way 16 ampswith suitable plate and cover complete all as specified and directed. |
| 92 | S & F Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed. |
| 93 | S & F Ceiling Fan step regulator, 120W modular complete all as specified and directed. |
| 94 | S & F ceiling rose surface bakelite 2 to 3 terminals 65 x 50mm complete all as specified and as directed by Engineer-in-Charge. |
| 95 | M & L for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 04 Sqmm and drawing through& including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 04 Sqmm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in ccocealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge.Note:- Conduit will be measured and paid separately. |
| 96 | S & F MCB Distribution board double door ,Single pole & neutral 240 Volt,8 way,type With 200 Amps bus bar complete all as specified and directed. |
| 97 | Supply and fixingexhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 98 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 3.5 core nominal cross section in service connections complete all as specified and directed. |
| 99 | Supply and fixing Amp rating MCCB 3 Pole, 415 V, fixed type, 125 Amps with breaking capacity 16 KA \"C\" curve MCCBs complete all as specified and directed. |
| 100 | Supply and fixingDistribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitablefor MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge.(Note: MCB\"s and MCCB will be measured and paid separately under relevent items) |
| 101 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 102 | (a)SP 5 To 32 AMP |
| 103 | (b)SPN 40 to 63 AMP |
| 104 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and directed. |
| 105 | Supply and fixing 36 watts recess /pendant mounting ultraslim LED flat panel2\" X 2\" made of extruded aluminiumframe with high LEDs & glare free opal diffuser IP20. LCTLRNE-36-FO-CDL of Crompton equivalent of Philips/Wipro incl taking down old UNSV. |
| 106 | Supply and fixingwall mounted fan complete with blades,hanging accessories,pull chain control and accessories,1350 rpm,230V,400mm size sweep Min air delivery 72CMM air delivery complete all as specified and directed. |
| 107 | Supply and fixingwall mounted industrial fan,heavy duty of 750mm sweep with all accessories including fixing on walland connecting electrically complete all as specified and directed. |
| 108 | Supply and fixing GI tubing light grade 50mm bore on poles ,under floors,road crossing etc complete all as specified and directed. |
| 109 | Supply,laying and testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade laid in trenches,floors,ducts passing through pipe for road crossing etc complete all as specified and directed. |
| 110 | Point wiring concealed with 2.5 Sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), drawing in and including PVC conduit 20 mm dia, having wall thickness not less than 2 mm with sunk cast iron/pressed steel terminal boxes made out of 1.2 mm thick sheet including one coat red oxide primer on internal and external surface covered with 3 mm thick hylam brand IS-2036 marked laminated sheet cover (for mounting switches, sockets, regulators etc), including 2.5 Sqmm PVC insulated (multistranded) FRLS copper conductor continuous earth wire for one light /fan point/bell point/15Amp Socket controlled by one,complete all as specified and directed. |
| 111 | Supply & fixing GI tubing lightgrade 50 mm bore on poles, under floors, road crossing etc all as reqd at site and as directed by Eng-in-Charge |
| 112 | Supply, Laying, connecting Cross sectional area 10 Sqmm 4 core XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade laid in trenches, floors, ducts passing through pipe forroad crossing etc complete all as directed by Engr-in-Charge.(excavation, earth work, brick protection sand cushioningand GI pipe etc shall be measured & paid for separately) |
| 113 | Un-reinforced precast concrete cable cover ,class LV,type-1 size 380X180X40mm complete all as specified & direction. |
| 114 | M&L for sand cushioning for cable with river washed sand and punning to provide required cover as per SSR Part –I complete all as directed.Note: Punned thickness of sand layer shall be paid to contractor |
| 115 | M & L for earthingcomplete with galvanized steel earth plate electrode60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised Iron 4mm by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmmin lieu of CI cover. |
| 116 | Switch socket combination 2 in 1, 3 Pin,16 A, flush type universal.complete all as specified and directed by Engr-in-charge. |
| 117 | Supply and fixing Plug top 15 amp |
| 118 | Supply and fixing 4 way TPN DB |
| 119 | Supply and fixing MCB TPN 63 Amp |
| 120 | Supply and fixing MCB TPN 40 Amp |
| 121 | Supply and fixing 3 phase starter 40 Amp dry type including all assy complete. |
| 122 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose / soft soil and getting out for under ground cable / erection of poles, stays etc complete all as specified and as directed. |
| 123 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cmcomplete all as specified and as directed. |
| 124 | SCHEDULE \"A\" PART-III (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch \"A\" Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. |
