Tender For Rejuvenation Of Green Space At Ward No.14 Sf No:739 Balaji Nagar In Denkanikottai Town Panchayat.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
08 Dec 2023
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
denkanikottai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Rejuvenation Of Green Space At Ward No.14 Sf No:739 Balaji Nagar In Denkanikottai Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNSS23 & 24, V, VI (S2), VII, 9,10Column |
| 2 | Grad Beam |
| 3 | Plain Cement Concrete of mix 1 : 4 : 8 (One part of Cement four part of sand eight part of aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII |
| 4 | Supplying anderrectingsteel centering including necessary supportsfor plain surfaces for Reinforced Cement Concrete works such as Coloumn footing,Coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10Bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorsComplying with standard Specification without Strutting. ( TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VIIBelow Ground Level |
| 5 | Square Column |
| 6 | Brick work in CM 1:5 (one cement & five sand) using IIclass ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing,etc., complete complying with standard specification 31 & Similar to 31C V, VI (S5) VII |
| 7 | Supplying ribbed tor steel rodsincluding cutting cranking fabricating assembling laying in exact position tying with soft steel wire 16 or 18 BWG etc. complete for all RCC Works.as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. SS86 & 86A,V, VI (S3) (S6) VII. |
| 8 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) -Footing, Plinth beam, Tie beam/Lintel, Ground Floor Roof beam, salbs, Sloped roof beam and slabs30 V, VI (S5)VII & 13Below Ground Level |
| 9 | Plastering in Cement Mortor 1:5 Mix (one part of Cement,, five part of sand)12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.TNDSS NO: 56, 57 |
| 10 | Supplying and Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It mustprovide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years. 61 V, VI (S4) 3 |
| 11 | Supply and fixing of Collposible gate andM.S Grills for Windows,with one coat of Red oxidePrimer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. including phosphating as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantlingmaking necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and Steel DoorComplete as Directed by the Departmental Officer. |
| 12 | Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc,in all floor withtwo coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc,complete complying with Standard Specification. ( The Make, Quality and colour of paint should be got approved bythe engineer in charge before use on works )( TNSS NO or NBC No 61 V VI (54) 3) |
| 13 | Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 14 | Providing, Laying, Spreading and compacting graded stone aggregate to Wet Mix Macadam for required thick specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density,including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers MORTH 406 |
| 15 | Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification.-10 Sqm |
| 16 | GeophysicalSurvey Charges |
| 17 | Supply and erection of 200 mm dia PVC causing pipe ete., complete |
| 18 | Drilling 150 mm Deep Borewell with including cost and conveyance materials all labour charges etc., complete1st depth of 150m |
| 19 | 150 m to 180m |
| 20 | 180m to 210m |
| 21 | Supply and Delivery of 2.00 HP ThreePhase Submersible mortarincluding cost and conveyace of all labour charges etc., complete1) 2.00 HP Submersible Motor with Panel Board (50 LPM, 100 m Head) |
| 22 | 2) 50 mm UPVC pipes |
| 23 | 3) 4 Sq.mm. Core cable |
| 24 | 4) 50mm GIpipes |
| 25 | Supply of 1000 Lit. capacity Plastic tank |
| 26 | Supply ofPVC PIPE6 Kg/cm2 including all cost andconveyance. |
| 27 | Conveying of PVC right pipe to trench with in a lead of 200m lowering in to a trench carefully laying to proper grad and alignment jointing with PVC couplers with cement paste and testing to the requited pressure including conveyance of water upto 1.00km |
| 28 | Lowering GI pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD officers |
| 29 | Labour charges for the erection ofSubmercible pumpset in Borewell or open well inculding Fixing and jointing submersible cable withproper clamps uptothestartertoreqired depthand al so fixing ofriserpipes to therequired depth valves, erection clamps, pressure gagues uptothe exterior wall of pump room anderection ofpanelboardconsisting of TPICN switchesstarter, voltmeter, Ammeter, three pilot (indicating) lamps, capacitor single phasing preventor, waqter level guard andlayingandjonting the cables andtwin earthing as perIE rules etc., complete and testingthepump setandtrail run for 10 days. (up to 5 HPMotor) |
| 30 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 31 | Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing.The cost shall inclusive of all materials, labours and fixing etc., complete as directed by the dpeartmetal officers |
| 32 | Supplying and fixing ofDouble Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia.The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc., complete as directed by the departmental officers. |
| 33 | Supplying and fixing of Jungle Gym The cost shall inclusive of all materials, labours and fixing etc., complete as directed by the dpeartmetal officers |
| 34 | Providing Three seater double polish finish blackGranitesitting single round bench ( stool type) 100 thick 45cm dia granite slab for bench slab and 150mm dia on middile and 30cm on end posts including cost and conveyance and fixing in position etc complete |
| 35 | Providing various designs of Animal Dust bins made of 3 layer fiber structure with multi colour powder coating. The height of the dist bins 4 feet available models are penguin, Rabbit, Fish and monkey etc.,Complete |
| 36 | Supply and installation of LED based Street Light luminaire made up of extured alluminium alloy body sealed toughened glass protector and pc side Covers. The optical and control Gear compartment should be with IP66 Tightness. Leds in Natural White (4000-4 |
| 37 | Supply and fixing of 2 x1.5 sq mm Copper cable from pole switching point to light fittings etc., complete |
| 38 | Supply and fixing of light post 4.00 M length with gradually reduce type pole 3 stages using 75mm and 50mm and 25mm size and bent up to top edge LED including fiber connection junction box internal wiring works on each pole inculuding cost and conveyance etc.., complete |
| 39 | Supply and Planting Border Plants on the sides of the foot path including inner portion of native varieties including cost and of labour etc., completeFicoss tree |
| 40 | border plants |
| 41 | Flower beds |
AI Tender Summary
Tender Timeline
Nov 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender