Military Engineer Services-MES has published Tender For Repairs/Maintenance Of External Water Supply Line From Nad To Ins Dega And Connected Works And Attending Breakdown Under Ge(U-Ii) Visakhapatnam. Submission Date for this Tender is 15-12-2023. Water Pipe Line Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M & L for pressure testing of existing CI / DI / MS water supply /fire lines for identifying leakages for rectifications including replacement of gland packing of sluice valves, rubber insertion packing, nut, bolts etc of flanged joints / defective flanges etc complete for making the system leak proof, complete all as specified and directed. Note:- (a) The quoted rate shall deemed to be inclusive of T&P such as air compressor for pressure testing etc. (b) Earthwork, DI / MS pipe & specials if required for rectification shall be measured and paid separately under relevant items BOQ. (c)Minimum & maximum distance shall be 1 KM & 2 KM of any type / size of pipes for conducting pressure test and the same shall be considered/measured as Each Job. |
| 2 | M & L for rectification of existing defective / leakage flanged joints with rubber or fibre gasket complete with necessary nuts, bolts and washers all as specified for 80 mm dia pipe lines of DI / MS / GI pipes, complete all as specified and directed. Note:- (a) The quoted rate shall be inclusive of cutting of DI / MS / GI Pipes, jointing materials and preparation of new flanged sockets and re-fixing the same at existing place. (b) Necessary excavation and pipes shall be measured and paid separately. |
| 3 | All as per Srl item No 2 above but for 100 mm dia pipe. |
| 4 | All as per Srl item No 2 above but for 150 mm dia pipe. |
| 5 | All as per Srl item No 2 above but for 200 mm dia pipe. |
| 6 | Supply only MS pipe 200mm dia bore, heavy grade, with two coats of synthetic enamel paint over a coat of Zinc chrome primer in open places and with bitumen coating, complete all as specified and directed. |
| 7 | Supply only MS pipe 150mm dia bore, heavy grade, with two coats of synthetic enamel paint over a coat of Zinc chrome primer in open places and with bitumen coating, complete all as specified and directed. |
| 8 | Supply only MS pipe 100mm dia bore, heavy grade, with two coats of synthetic enamel paint over a coat of Zinc chrome primer in open places and with bitumen coating, complete all as specified and directed. |
| 9 | Supply only MS pipe 80mm dia bore, heavy grade, with two coats of synthetic enamel paint over a coat of Zinc chrome primer in open places and with bitumen coating, complete all as specified and directed. |
| 10 | S & F in repairs Ductile Iron Pipes 200 mm bore centrifugally cast (spun) including jointing in standard length, S/S type, Class "K9" conforming to IS 8329-2000 (latest version) in any length laid in trenches including taking down unserviceable old one, complete all as specified and directed. |
| 11 | S & F in repairs Ductile Iron Pipes 150 mm bore centrifugally cast (spun) including jointing in standard length, S/S type, Class "K9" conforming to IS 8329-2000 (latest version) in any length laid in trenches including taking down unserviceable old one, complete all as specified and directed. |
| 12 | S & F in repairs Ductile Iron Pipes 100 mm bore centrifugally cast (spun) including jointing in standard length, S/S type, Class "K9" conforming to IS 8329-2000 (latest version) in any length laid in trenches including taking down unserviceable old one, complete all as specified and directed. |
| 13 | Supply & fix DI fittings in repairs (pressure class K-9) such as bends, (any type, radius and angle), Tapers any type (straight bend, increasing, decreasing or double socket etc) Tee piece single branch "Y" junction double branch, cross (all socket or socket and spigot) collars, caps and plugs of size up to 200mm bore confirming to IS 9523-2000 including taking down unserviceable old one, complete all as specified and directed. |
| 14 | Material and labour for framed work such as valve chamber covers, static tank cover, base frames for pump sets, protection covers for pump sets/panel boards, staging for water tank, ladders etc, complete all as specified and directed. |
| 15 | M & L for arresting water leakage fromsluice valve of size 80mm dia, byrefacing, regrinding of sluice Valve, Repacking stuffing box of sluice valve spindle including taking apart and reassembling the same including replacing oldcheck nuts with new onemade out of MS / CI material, with and including replacing perished gland packing, rubber gasket, bolts and nutscomplete all as directed. |
| 16 | All as per Srl item No 15 above but for 100 mm dia valve. |
| 17 | All as per Srl item No 15 above but for 150 mm dia valve. |
| 18 | All as per Srl item No 15 above but for 200 mm dia valve. |
| 19 | Demolition & dismantling of cement concrete / black top roads / paving for making trench for laying Pipe / XLPE cable etc including removing the debris from the site of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 20 | Material and labour for PCC (1:3:6) type C1 using 20 mm graded stone aggregate as a base foundation / making pedestals for the pipelines, complete all as specified and directed. |
| 21 | Supply and fix flanged end lift type foot valve 150 mm dia (Strainer for suction) with brass strainer, suitable flanges, nuts, bolts, gaskets, complete all as specified and directed. |
| 22 | Supply and fix flanged end lift type foot valve 100 mm dia (Strainer for suction) with brass strainer, suitable flanges, nuts, bolts, gaskets, complete all as specified and directed. |
| 23 | Supply and fix flanged end lift type foot valve 80 mm dia (Strainer for suction) with brass strainer, suitable flanges, nuts, bolts, gaskets, complete all as specified and directed. |
| 24 | Supply and fix sluice valve of class PN 1.6 dia 200mm (8") IS complete including inserting and jointing material bolt, nuts and gasket after dismantling and taking out unserviceable sluice valve, complete all as specified and directed. |
| 25 | Supply and fix sluice valve of class PN 1.6 dia 150mm (6") IS complete including inserting and jointing material bolt, nuts and gasket after dismantling and taking out unserviceable sluice valve, complete all as specified and directed. |
| 26 | Supply and fix sluice valve of class PN 1.6 dia 100mm (4") IS complete including inserting and jointing material bolt, nuts and gasket after dismantling and taking out unserviceable sluice valve, complete all as specified and directed. |
| 27 | Supply and fix sluice valve of class PN 1.6 dia 80mm (3") IS complete including inserting and jointing material bolt, nuts and gasket after dismantling and taking out unserviceable sluice valve, complete all as specified and directed. |
| 28 | Supply and fixing Gun metal gate valve of size 80 mm dia, with iron wheel head, screwed both ends, class II, and fixed complete including cutting of the any type of pipeline and taking down old unserviceable valves wherever required, complete all as specified and directed. |
| 29 | Supply and fixing Gun metal gate valve of size 50 mm dia, with iron wheel head, screwed both ends, class II, and fixed complete including cutting of the any type of pipeline and taking down old unserviceable valves wherever required, complete all as specified and directed. |
| 30 | Supply and fixing Gun metal gate valve of size 40 mm dia, with iron wheel head, screwed both ends, class II, and fixed complete including cutting of the any type of pipeline and taking down old unserviceable valves wherever required, complete all as specified and directed. |
| 31 | Supply and fixing Gun metal gate valve of size 25 mm dia, with iron wheel head, screwed both ends, class II, and fixed complete including cutting of the any type of pipeline and taking down old unserviceable valves wherever required, complete all as specified and directed. |
| 32 | Supply and lay 3 layer ISI marked, IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings, brass threaded polypropylene random in trenches / walls / celling or laying in floors complete of size outer dia 90 mm, including fittings complete all as specified |
| 33 | Supply and lay 3 layer ISI marked, IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings, brass threaded polypropylene random in trenches / walls / celling or laying in floors complete of size outer dia 75 mm, including fittings, complete all as specified and directed. |
| 34 | Supply and lay 3 layer ISI marked, IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings brass threaded polypropylene random in trenches / walls / celling or laying in floors complete of size outer dia 63 mm, including fittings, complete all as specified and directed. |
| 35 | M & L Masonry Valve Chamber of size 600x600x600 mm (internal dimensions) and including necessary excavation and earth work in any type of soil, 100 mm thick PCC 1:4:8 type D2 foundation, brick work in cement mortar 1:6, plastering internal and external surface 15 mm thick in CM 1:4, 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) coping, including dismantling unserviceable, complete all as specified and directed. |
| 36 | M & L Masonry Valve Chamber of size 900x900x900 mm (internal dimensions) and including necessary excavation and earth work in any type of soil, 100 mm thick PCC 1:4:8 type D2 foundation, brick work in cement mortar 1:6, plastering internal and external surface 15 mm thick in CM 1:4, 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) coping, including dismantling unserviceable, complete all as specified and directed. |
| 37 | S & F in replacement of FRP Composite Tank / chamber Cover of size 60 cm x 60 cm made of standard designs conforming to IS:1726-1991, having load bearing of 2.5 TON including frame, complete all as specified and directed |
| 38 | S & F in replacement of FRP Composite Tank / chamber Cover of size 90 cm x 90 cm made of standard designs conforming to IS:1726-1991, having load bearing of 2.5 TON including frame, complete all as specified and directed |
| 39 | M & L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 40 | M & L for cleaning of vegetation by using excavator for removing bushes / thick vegetation around the pump house, installations, levelling the area without damaging the pipelines / Cable network / Pedestals of pipelines / buildings including disposal of the vegetation / debris material up to a distance not exceeding 50 m, complete all as specified and directed. |
| 41 | Supply and fixing in replacement Mild steel Air Release Valve, 80 mm dia, ISI marked, fixing up in MS / DI / GI water supply mains with including suitable flanges 2 Nos with nuts, bolts, washers, fibre gasket complete all as specified and directed by Engr-in-Charge. |
| 42 | M & L Synthetic mat (rubber matting) suitable for 1100 Volts electrical grade 2mx1mx19mm thick chequered top, ISI marked to be laid in front of LT panel board, complete all as specified and directed. |
| 43 | M & L for Brickwork with Fly Ash bricks, straight or curved on plan exec 6m mean radius built in Cement mortar 1:4 complete including demolation of old brick structures, complete all as specified and directed. |
| 44 | M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick surface mixed with water proofing compound as per manufacturer"s instruction finished even and fair without using extra cement including two coats of white washing, complete all as specified and directed. |
| 45 | S& F in replacement GI tubing , medium grade, with all fittings, complete fixed to walls or laid in trenches / floors for 25 mm dia complete incl bends / reducers if necessary and GI fittings etc, complete all as specified and directed |
| 46 | S& F in replacement GI tubing , medium grade, with all fittings, complete fixed to walls or laid in trenches / floors for 40 mm dia complete incl bends / reducers if necessary and GI fittings etc, complete all as specified and directed |
| 47 | S& F in replacement GI tubing , medium grade, with all fittings, complete fixed to walls or laid in trenches / floors for 50 mm dia complete incl bends / reducers if necessary and GI fittings etc, complete all as specified and directed |
| 48 | S& F in replacement GI tubing , medium grade, with all fittings, complete fixed to walls or laid in trenches / floors for 80 mm dia complete incl bends / reducers if necessary and GI fittings etc, complete all as specified and directed |
| 49 | Supply & replacement of water level indicator, 36" dia for OHT/UG sump as per IS and including numbering with radium stickering, heavy duty float, counter weight, heavy duty driving gear nylon wire fitted in all in GI housing, cutting the RCC slab and making good the slab, painting the exposed surface with two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and directed. |
| 50 | Design, fabricate and install fully retro reflective sign board made out of 18 gauge CRCA sheet (200mm X 900mm) with 40mm dia stainless steel square / round tube 1.6 mm thick having entire surface fully bonded with retro reflective sheeting of HTP grade tape having pressure sensitive adhesive boards and messages as indicated cut out back ground in blue / green and matter in white colour tape having two posts 3.0 m long made of 65 mm dia circular tube 1.6 mm thick sheet embedded in PCC (1:2:4) type B1 (20mm graded stone aggregate) bed block of size 300mm X 300mm X 600mm depth including necessary earth work excavation, including removing the old one, complete all as specified and directed. |
| 51 | Design fabricate, supply, install "GLOW SIGN BOARD" of size 1.80 x 1.00 x 0.20 metre of board made up of Plain steel sheet of 1.0 mm thick with MS medium grade Square tube supports of size 25mm with Bakelite flex (Transparent) type white and blue in colour by computerised MES NEW LOGO and stenciled letters like various clean white capital letters on blue / other colour as directed in English / Hindi with required numbers and LED lights fittings as required complete including necessary fitment, electrical wiring, MS angles / Steel round bars, GI sheets, pipes clamps bolts & nuts incase fixed on wall including removing old one, complete all as specified and directed. |
| 52 | Excavation in trenches in soft/loose soil next. 1.5M wide & n exec 1.5M deep for laying of GI/CI pipe line & getting out including forming bottom surface, complete all as specified and directed |
| 53 | Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer next. 250 mm in any type of soil after the pipe laid & tested, complete all as specified and directed. |
| 54 | Removing excavated surplus soil to a distance next. 50mtr and depositing where directed at a level next. 1.5 m above the starting point all as specified and directed |
| 55 | M & L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to galvanised iron strip 32 x 6mm diaby means of nuts and bolt check nuts and washers of galvanised iron sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to and includingearthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil up to 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made but at 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed including taking out old earth plates and strips for credit, complete all as specified and directed |
| 56 | SCHEDULE OF CREDIT Note :- Amount of Rs. 73,440.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
