Central University Of Punjab has published Tender For Installation Of Fountain In Rose Garden In The Campus Of Central University Of Punjab At Village Ghudda, Bathinda-151401. Submission Date for this Tender is 08-12-2023. Fountains Tenders in Bathinda Punjab. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | EARTH WORK |
2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge All kinds of soil |
3 | CEMENT CONCRETE WORK (CAST IN SITU) |
4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
5 | BRICK WORK |
6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
7 | PLASTERING |
8 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) |
9 | Extra for plastering on circular work not exceeding 6 m in radius: In one coat |
10 | CLADDING WORK |
11 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: |
12 | ELECTRICAL AND MECHANICAL WORK FOR FOUNTAIN |
13 | 1 no. submersible 3 H.P. monoblock three phase, 2880 R.P.M. Copper roter, discharge: 75 mm, delivery head: 15mts/800 L.P.M.; 25 mts/450 L.P.M. (Make Kirloskar/ Crompton/ RR or equivalent) |
14 | 1 no. submersible pump 2 H.P 1.5 KW three phase, 2880 R.P.M., Copper roter, Size 50x50mm; delivery head: 15 mts/400 L.P.M. ;24mts/275 L.P.M. Head range: 15/28 mts.; (Make Kirloskar/ Crompton/ RR or equivalent) |
15 | 4. 2 no. Starter for pumps (Make: L&T) |
16 | 1 no. weather proof outdoor panel Box for starter & sequencial, MCB, Power supply 6” x 12” x 24” double sided hut complete in all aspects. |
17 | 4 no. Power RGB LED lights nozzle mounted 9 watts 7 color effects diameter: 90mm, Element: carbon- 0.080 Std./ 00.045% act; Maganese – 1.50 Std./ 01.033% act.; Nickel –8-0-11.0 std./ 08.250 act. IP 68 |
18 | 6 no. Power RGB LED lights with stand 9 watts 7 color effects diameter: 90 mm, Element: carbon- 0.080 Std./ 00.045% act; Maganese – 1.50 Std./ 01.033% act.; Nickel – 8-0-11.0 std./ 08.250 act. IP 68 |
19 | 1 no. Power supply for Lights (Heavy) |
20 | 10 no. Light fixing stands |
21 | 1 no. 1.5” G.I. “B” class pipe ring dia 15 feet with fixing of 121 studds (Make- Jindal/ equivalent) |
22 | 1 no. 1.25” G.I. “B” class pipe Ring dia 1.5 feet with fixing of 12 studds (Make- Jindal/ equivalent) |
23 | 7 no. G.I. Ring supporting stand |
24 | 133 no. ¼” brass nickel coated adjustable nozzles |
25 | 4 no. Foaming nozzle 1” |
26 | 2 no. water filter grill of MS frame covered with stainless steel jaali 50 mm Suction |
27 | 4 no. Height adjusting valve 25 mm SS / Brass nickle coated |
28 | 3 no. Height adjusting valve 40mm SS / Brass nickle coated |
29 | 1 no. 8-way header |
30 | 12m (approx.) 1.5” G.I. pipe |
31 | 1 no. 4-way MCB with housing |
32 | 1 no. single MCB with housing |
33 | 1no. Automatic electronic control unit (for light ) with multi-programming |
34 | 1 no. Remote for operating lights |
35 | 30m (approx.) 1.5mm 4 core submersible wire (Make- Havels, Finolex, RR, or equivalent) |
36 | 15m (approx.) 2.5mm 3 core submersible wire (Make- Havels, Finolex, RR, or equivalent) |
37 | 4 no. 1” Ball joint for straight creation |
38 | Miscellaneous fittings/ fixtures required for completion of work like tee, elbow, nipple, bend, nut-bolts etc. or unless otherwise not listed here. |
39 | Installation, Testing and Commissioning work |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail