Department of Agricultural Research and Education has published Tender For Renovation Of The Auditorium (Room No:411) & Pantry Room (Room No:412) Utilised For Gis & Ccd-Soil Lab,Fixing Of Toughened Glass For Windows In Block-Ii (Nabl Lab),Renovation Of Old Coldroom(Room No:203) And Anodizing The Aluminium Partition In. Submission Date for this Tender is 07-12-2023. Auditorium Construction Tenders in chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Removable of existing wall panelling,wall pannelling sheet coverand disposal of unserviceable material etc., the rate including the disposal of the debris outside the premises in places approved by the relevant local Govt. authority and usable material to be handover to Engineer In charge (including remove & re-fixingof false ceiling with necessaary arrangments wherever required). |
| 3 | Removable in cement mortar/Granite/ marble/tiles/false ceilings and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.and the rate including cost of all necessary required equipment materials and labour charges etc,. as directed by departmental officer. |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) |
| 6 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 7 | Wall painting with premium acrylic emulsion paint of interior grade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat |
| 8 | 75mm Modular Type Aluminium Partition with 5 No’s ofsliding /openable Door (including door stopper, door closer & lock etc.) 2"x1"Metal Fabrication Structure, 75mm Aluminium channel with powder coated, both side 9 mm thick pre-laminated particle board(flat pressed three layer of graded wood particle board conforming to IS:12823) up to 4" (Bottom area) from floor level and the balance 3’ height 5mm thick plain glass. Aluminium sections shall be smooth,rust free straight, metered and jointed mechanically wherever required includingcleat angle, Aluminium snap beading forglazing / panelling, C.P. brass/ stainless steel screws all complete as per drawingsand the direction of engineer-in-charge .The rate including cost of all materials and labour charges etc.,as directed by the dept.officers. (The color/design of the particle board,aluminium section will be decide by competent authority) |
| 9 | Providing and fixing fully glazed 12mm thick toughened glass including cutting,making holes,fixing of the necessary fixtures,screws,sealent and SS patch fittings/frame all around the glazing wherever necessary as per the site condtion etc., the rate shall be include necessary etching flim / Logo and removal of existing windows & grills etc.,all inclusive complete |
| 10 | Removal of existing aliminium partion,anodised aluminium sections (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and refixing aluminium partion including transport,necessary stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant,backer rods & EPDM casket, other equipment charges ,labour charges etc., for removal & re- fixing, all complete as per requirement and direction of Engineer-in-charge. |
| 11 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size ofTile 600x600 mm |
| 14 | GST for all the above items in percentage has be given in the cell-M26 and GST amount will be calculated automatically in Cell-BA26.(Evaluation of bid will be made without taking GST) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
