All India Institute Of Medical Sciences-AIIMS has published Tender For Provision Of Etp Line Connection To Opd, Ipd Trauma, Ayush Pmr And Medical College Building And Replacement Of Existing Pvc Pipe Line With Di Pipe At Aiims Patna.. Submission Date for this Tender is 13-12-2023. Ductile Iron Pipe Tenders in patna Bihar. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :100 mm dia Ductile Iron Class K-9 pipes |
| 2 | Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F .P .S.(non modular) bricks of class designation 7.5 |
| 3 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F .P .S. (non modular) bricks |
| 4 | Providing and fixing 6 mm dia. G .I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G .I. flat 40x3mm size 60 mm long and st ainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge. |
| 5 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :For 100 mm dia pipe |
| 6 | Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 : Up to 600 mm dia |
| 7 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : 100 mm dia pipes |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
