Bharat Sanchar Nigam Limited-BSNL has published Tender For Repairing Of Underground Sump Submersible Pump Motor Set, Replacement Of Power Cable And Other Allied Electrical Repairing Works At Mw Colony, Unit-8, Bhubaneswar Under Bhubaneswar Ba. Submission Date for this Tender is 04-12-2023. Electrical Maintenance Tenders in bhubaneswar Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Making conveyance arrangements for Pump Mechanics along with spare parts, tools and instruments etc. for attending the Pump set faults at different Telephone Exchange / staff quarters on need basis etc. as required. |
| 2 | Distance up to 50 Kms from Bhubaneswar |
| 3 | Attending minor faults in the pump sets/control panels/starters and restoration of the pump sets i/c replacement of starters, relays, switches, contactors and assessing the materials required/works to be carried out in case of major faults etc. as required |
| 4 | Withdrawing of 7.5HP open well submersible pump set from the UG sump after disconnection of power supply cable, delivery pipes etc. complete as required. |
| 5 | Transportation of the faulty pump set from site to nearest authorized service centre and bring back to site after repairing i/c loading and unloading etc. as required. |
| 6 | Dismantling the submersible Pump motor set, checking and fault finding, preparation of bill of materials/defect list etc. complete as required. |
| 7 | Servicing ofthe 7.5 HP, 3 phase, 415 volts, 50 Hzopen well submersible pump set i/c cleaning of mud depositions, servicingand re-assembling after rewinding and repairing/replacement of existing defective/worn out parts/components etc. as required. |
| 8 | Rewinding of the 7.5 HP, 3 phase 415 volts, 50 Hz horizontal type Open well submersible pump motor (Make- Kirloskar) with bright annealed high conducting electrolytic copper PVC insulated copper wire of suitable size and quantity etc. complete as required. (The dismantled materials may be retained by the Contractor) |
| 9 | Replacement of the following defective parts /components of 7.5 HP submersible pump set by new ones of approved make etc. as required |
| 10 | Gun metal Bush i/c lathe works |
| 11 | Re-installation of the repaired 7.5HP submersible pump set in UG sump i/c reconnection of delivery pipe, electrical power supply cable, testing and trial run etc. complete as required. |
| 12 | Making arrangement and hiring of one ready to use electric driven pump motor set complete with suction pipe, foot valve etc. for draining out the water and making underground water sump empty before dismantling the faulty submersible pump motor set and during installation of the repaired pump motor set etc. complete as required. |
| 13 | Supplying and fixing of following items suitable for operation on 1ph 230V/ 3Ph, 415V including interconnection, testing etc. complete as required. (Make: Legrand/Siemens/ L & T) |
| 14 | 63Amps, 4 Pole MCB (Make: Legrand/Siemens/ L & T) |
| 15 | 9 watt LED lamp suitable for angle/batten holder. |
| 16 | Supply of the following sizes PVC insulated & PVC sheathed Aluminium conductor armoured cable 650/1100 V. grade confirming to IS: 7098 (Part-1) 1988 etc. complete as required. |
| 17 | 4 X 70sq.mm |
| 18 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size directly in ground including excavation, sand cushioning and protective covering, refilling the trench etc. complete as required. |
| 19 | Above 35 sq. mm and up to 95 sq. mm |
| 20 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following sizein the existing masonry open duct/Air etc. complete as required |
| 21 | Above 35 sq. mm and up to 95 sq. mm |
| 22 | Supply and making MV cable end terminationswith brass compression gland and copper / aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE copper/aluminium conductor cable of 1.1 KV grade as required. |
| 23 | 4 X 70 sq. mm (38mm) Aluminium conductor armoured cable. |
| 24 | Supply and Fixing of 4 module metal enclosure as per IEC 61439-3 for independent mounting of MCB i/c grouting/fixing on wall etc. as required. (Make- Legrand /Havells /HPL/ Standard) |
| 25 | Repairing of 45 watt LED street light fittings including replacement of electronic drivers, connection, testing etc. complete as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
