Tender For Construction Of New Anganwadi Building Adc At Melkodungalore Panchayat Of Vandavasi Blockthiruvannamalai Dist- Pmagy ( B.Pt) -2022-2023
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Nov 2023
0 days left
EMD
15390
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vandavasi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Anganwadi Building Adc At Melkodungalore Panchayat Of Vandavasi Blockthiruvannamalai Dist- Pmagy ( B.Pt) -2022-2023
BOQ
| Sl. No. | Item Description |
| 1 | Construction ofNew AnganwadiBuildingADCat Melkodungalorepanchayatof Vandavasi Block Thiruvannamalai Dist -PMAGY (B.Pt) - 2022-2023 |
| 2 | Earth work excavation for foundation and depositingon bank with initial lead of 10 mts and initial lift of 2.0 in hard stiff clay stiff black cotton soil, hard red earth shales, murram, gravel, stoney earth and earth mixed with 50% fair sized boulders and gravelly soil etc., complete for boxing as per IS 20A. |
| 3 | Base course concrete with C.C.1:4:8 mix using 40mm I.S.S. size HBG metal from approved quarry to work site including cost and conveyance of all materials and labour charges for mixing for base course as per standared specification. |
| 4 | Centering and shuttering for sidesincluding cost and convayance and labour charges etc complete. |
| 5 | Cement Concrete Pavement with C.C.1:2:4 HBG metal from approved quarry to work site including cost and conveyance of all materials and labour charges for mixing, laying compacting, etc., complete |
| 6 | Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. Ramp wall inside for Building, Ramp wall outside for Building |
| 7 | RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc. |
| 8 | Column above Grade beam |
| 9 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. |
| 10 | Roof& Roof Beam |
| 11 | Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete. |
| 12 | Construction of Granular Sub base by providing well graded Weathering coarse concrete using 20mm size broken brick jelly with in pure slaked lime overthe RCC Roof in the proportion of 32 : 12 1/2 by volume laid in layer beating the concrete with the wooden batters etc as per standard specifications . |
| 13 | Finishing the top of roof with one course of Pressed tiles conveyance of all materials to site and all labour charges etc complete for 10 Sqm |
| 14 | Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc. |
| 15 | Plastering with cement mortar 1:3, 10mm thick including cost and conveyance and all labour charges etc. |
| 16 | Cement concrete 1:2:4 mix using 20mm ISS metal including cost and including cost and conveyance and all labour charges etc,. |
| 17 | Paving the Floor with scratch proof vertified tiles of size 600x600x8mm laid in CM 1;2,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut thecolour of the tilesincludingcost and conveyance of all materials to site and all labour charges etc complete |
| 18 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)Using anti-skid tiles (Observed Data) |
| 19 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and ThreeM.Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. |
| 20 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes 150mmX 150mmX 6mm set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., |
| 21 | Towards the cost of steel door of size.9 mx2.4m including all charges etc. |
| 22 | Towards the cost of steel door of size 0.75mx1.5 m including all charges etc. |
| 23 | Towards the cost of steel door of size 1.10mx2.4 m including all charges etc. |
| 24 | Towards the cost of steel ventilator of size 0.9x0.45 m including all charges etc. |
| 25 | Towards the cost of steel window of size 1.8m*1.6m including all charges |
| 26 | Towards the cost of steel Window of size1.5mx1.6 m including all charges etc. |
| 27 | Towards cost and fixing of RCC Jolly of size 0.90x0.45m including cost and conveyance and labour for fixing etc |
| 28 | Paintingtwo coatwith approved quality ofdistemper with colour over one coat of white cement forprimier coat for the base including preparing surface and all materials cost labour etc |
| 29 | Painting two coatwith ready mixedplastic emulsion of firstquality paint and of approved colour over apriming coatincluding thorogh scarpping clean removal of dirt etc complete. |
| 30 | Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc. |
| 31 | Provision for electrification arrangements with service connection |
| 32 | LIGHT POINTSD20 |
| 33 | FANPOINTSD20 |
| 34 | FAN point SD112 |
| 35 | Plug point (SD38) |
| 36 | CFL lamp (SD80) |
| 37 | TUBE Light Fittings ( SD 88 ) |
| 38 | DPI swtich of 500 V(SD142) |
| 39 | G I Pipe (SD69) |
| 40 | Service Wire (SD64) |
| 41 | Bulk head fitting (SD83) |
| 42 | Water supply and sanitaryarrangements |
| 43 | 500 lit tank |
| 44 | 25mm UPVC pipe |
| 45 | 25mm UPVC elbow |
| 46 | 25mm UPVC Bend |
| 47 | 25 mm UPVC Tee |
| 48 | 110 mm PVC PIPE 6Ksc |
| 49 | 110mm pvc tee |
| 50 | 110mm pvc elbow |
| 51 | 15 mm diacp down tap |
| 52 | Cost & Supply For Baby W.C including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 53 | Cost & Supply For E W.C including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 54 | Cost & Supply For Flat Black Urinal Trap including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 55 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 56 | Cost & Supply of Cudappah Slab including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 57 | Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete. |
| 58 | Provision forRain water Harwesting pit Arrangements |
| 59 | Provision forHand Rail for SS Works |
| 60 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Nov 23, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 30, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender