Department Of Housing And Urban Development has published Tender For Annual Maintenance Rate Contract For Repairs /Replacement Of Damaged Spare Parts Including Scheduled Servicing (As And When Required) Of Various Departmental Vehicles) Of Tata Make. Submission Date for this Tender is 30-11-2023. Vehicle Maintenance Service Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Departmental Vehicle bearing No. JK01AG-6651 (TATA 407) |
2 | Schedule Servicing:- The job shall include providing and filling of POL"s and spares as and when required |
3 | Providing and Filling Engine oil grade 20 w 40 |
4 | Providing and Fitting Oil filter |
5 | Providing and Fitting Fuel filter (water separator) |
6 | Providing and Fitting Air cleaner element. Primary |
7 | Providing and Fitting Air cleaner element. Secondary |
8 | Providing and Fitting Water body Assembly |
9 | Providing and Fitting Gear oil Change 80 W 90 |
10 | Providing and Filling Hydraulic oil 68 Grade |
11 | Providing and Filling steering oil |
12 | Providing and Fitting steering oil filter |
13 | Repair/ replacement of turbo repair kit |
14 | Brake booster kitProviding and Fitting:The job shall include dismantling of the brake boosters form the Truck and taking the same to the workplace of the contractor. Thereafter, the job shall include further dismantling the brake boosters ascertaining of the faults. Further the chambers of the booster be taken over the machineandthe chambers be finished to the required size .Further therequisite new brake booster kitsbe fitted if required. Assembling back the chambers to the booster assembly and bring the same to the workshop for further fitment to the machine to check for the proper functioning ( Front Wheel) |
15 | Brake booster kitProviding and Fitting:The job shall include dismantling of the brake boosters form the Truck and taking the same to the workplace of the contractor. Thereafter, the job shall include further dismantling the brake boosters ascertaining of the faults. Further the chambers of the booster be taken over the machineandthe chambers be finished to the required size .Further therequisite new brake booster kitsbe fitted if required. Assembling back the chambers to the booster assembly and bring the same to the workshop for further fitment to the machine to check for the proper functioning (Rear Wheel) |
16 | Propeller Shaft:- Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
17 | Machining job of the Propeller shaft along withproviding and fitting of Universal Joint and clampsThe jobincludes dismantling of propeller shaft from the Vehicle at site and the propeller shaft be taken to the contractor’s workplace for further execution of job over the Lathe machine. During machining, torsions needs to be checked thoroughly and rectified. Both the ends of the propeller shaft may need cutting. A new half yoke be fitted by way of welding along with a new universal joint and cross holder .The alignment of the assembly be finished and checked over the lathe machine once again. The spares once fitted and assembled need to be checked over Lathe machine to ensure the zero error before proceeding further .After the job is complete the same needs to be carried back to the site for further fitment to the machine,. The tipper needs to be tested thoroughly after fitment for ascertaining the quality of the job. |
18 | U-J Cross |
19 | Cross Holder |
20 | Coupling |
21 | HalfYoke |
22 | Central Bearing with rubber Assembly Complete |
23 | Shaft Bolts with Nuts and Washer. |
24 | Main brake booster pipe |
25 | Clutch Plate |
26 | Pressure plate |
27 | Clutch Release Bearing. With Hub |
28 | Fly Wheel Ring |
29 | Fly Wheels Bolts |
30 | Turbo charger repair |
31 | Suspension System:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
32 | Augmentation of Leaf Springs(Rear):The job shall include dismantling of the rear wheel spring assembly of the truck completely on both sides, one at a time with the help of jacks. The leaf springs shall be cleaned and hammered/tempered by jack devices up to the required shape and requisite tension , followed by greasing. Two numbers of new leaf springs are to be added on both sides by putting the leaf spring in position and inserting the mounting bolts and retainer Nuts at each end to secure the springs to the rear hanger. The U Bolt brackets are to be placed around the leaf spring and rear axle. The whole operation shall comprise replacement of, eyelet bolts from the eye bushes, shackle pins, center bolts, U Clamp with bolt washers, rear hanger washer and other requisite spares. The whole assembly shall be fitted back to the truck and greased properly to make the assembly work smoothly. |
33 | Re-Arching of the existing for rearsuspension :The job shall include dismantling of the rear wheel spring assembly of the truck completely on both sides, one at a time with the help of jacks. The leaf springs shall be cleaned and hammered/tempered by jack devices up to the required shape and requisite tension , followed by greasing. Two numbers of new leaf springs are to be added on both sides by putting the leaf spring in position and inserting the mounting bolts and retainer Nuts at each end to secure the springs to the rear hanger. The U Bolt brackets are to be placed around the leaf spring and rear axle. The whole operation shall comprise replacement of, eyelet bolts from the eye bushes, shackle pins, center bolts, U Clamp with bolt washers, rear hanger washer and other requisite spares. The whole assembly shall be fitted back to the truck and greased properly to make the assembly work smoothly. |
34 | Augmentation of Leaf Springs (Front):The job shall include dismantling of the rear wheel spring assembly of the truck completely on both sides, one at a time with the help of jacks. The leaf springs shall be cleaned and hammered/tempered by jack devices up to the required shape and requisite tension , followed by greasing. Two numbers of new leaf springs are to be added on both sides by putting the leaf spring in position and inserting the mounting bolts and retainer Nuts at each end to secure the springs to the rear hanger. The U Bolt brackets are to be placed around the leaf spring and rear axle. The whole operation shall comprise replacement of, eyelet bolts from the eye bushes, shackle pins, center bolts, U Clamp with bolt washers, rear hanger washer and other requisite spares. The whole assembly shall be fitted back to the truck and greased properly to make the assembly work smoothly. |
35 | Re-Arching of the existing for rearsuspension :The job shall include dismantling of the rear wheel spring assembly of the truck completely on both sides, one at a time with the help of jacks. The leaf springs shall be cleaned and hammered/tempered by jack devices up to the required shape and requisite tension , followed by greasing. Two numbers of new leaf springs are to be added on both sides by putting the leaf spring in position and inserting the mounting bolts and retainer Nuts at each end to secure the springs to the rear hanger. The U Bolt brackets are to be placed around the leaf spring and rear axle. The whole operation shall comprise replacement of, eyelet bolts from the eye bushes, shackle pins, center bolts, U Clamp with bolt washers, rear hanger washer and other requisite spares. The whole assembly shall be fitted back to the truck and greased properly to make the assembly work smoothly. |
36 | Providing and fitting of leaf springs and allied spares as per requirement |
37 | Auxillary Rear Leaf |
38 | Leaf Spring Clamps 8" |
39 | Leaf Spring Clamps 5" |
40 | Leaf Spring rivets |
41 | Leaf Spring Bush |
42 | Centre Bolt |
43 | Gear Box Bolt |
44 | Tappet Cover Gasket |
45 | Leaf Spring Bolt |
46 | Leaf Spring Cotter |
47 | U-Bolt 18"" |
48 | Wheel System :-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
49 | Front Wheel oil seal |
50 | Tie Rod Ball Set |
51 | F/WBearings. Inner |
52 | F/W Bearings. Outer |
53 | Front brake lining sets |
54 | Rear brake lining sets |
55 | Slack Adjuster Automatic |
56 | Real wheel oil seal |
57 | R/w Bearings. Inner |
58 | R/w Bearings. Outer |
59 | Wheel Cam bush |
60 | Wheel Cam oil Seal |
61 | FuelInjection Pump:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
62 | Complete overhauling of the Fuel Injection Pump alongwith nozzles.The job shall comprise taking of the dismantled fuel pump assembly alongwith nozzlesfrom the workshop and examining the same for further job to be executed. It shall further checked for the damaged/worn outspares forreplacements, comprising,Element Set(01 Set of 04 Nos),Delivery Valve(01 Set of 04 Nos),Complete Nozzle set replacement(06 Nos),Taper Roller bearing(01 Set),Nozzle Cups(06 Nos),Cross Disc(01 No),T quadrant(02 Nos) and Camplate(01 No).Upon replacement of the mentioned spares the Fuel Pump shall be assembled and tested for the proper atomisation in order to have the correct fuel to thefuel injector in correct timing andthe accurate metered amount of fuel with sufficient pressure from the nozzles over the Diesel Pump testingmachine.Once the job gets completed,the Fuel Pump shall be brought back to workshop for further fitment to the Truck.The job shall get executed by a highly skilled proffesional only. |
63 | Nozzle |
64 | Steering System:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
65 | Steering. Cross |
66 | Self starter :-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
67 | Armature Assembly |
68 | Self Carbon bush set |
69 | Self bearing |
70 | Bendex Drive |
71 | SolenoidSwitch |
72 | Field Coil Set |
73 | Battery Lead 8 AWG gaugemultistrendwith copper Thimbles and terminals etc. Both negative and positive |
74 | Re-building ofbattery poles. |
75 | Ignition switch |
76 | Alternator Assembly:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
77 | Rectifier plate |
78 | Carbon Bush Set |
79 | Cut out |
80 | Armature Assembly |
81 | Armature Bearing |
82 | Silencer:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
83 | Joint & Bolts |
84 | Silencer Gas Welding and Patching |
85 | Radiator Assembly;-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
86 | Radiator Cup |
87 | Hose pipe Sets upper & lower with Clamps |
88 | Radiator Leakage Arrest by way of soldering, carbon leakage testing, cleaning of radiator cooling fins & servicing. Besides the job shall include dismounting & remounting of radiator by way of engaging of skilled machanic on the job. |
89 | Electrical Works:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
90 | New T-Horn Assembly |
91 | Head Light Assy. |
92 | Head Light bulb |
93 | Tail light bulb |
94 | Indicator bulb |
95 | Tail light Assy |
96 | Cab. Light |
97 | Side Indicator Assy. |
98 | Combination Switch. |
99 | Ignition switch |
100 | Brake System:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
101 | Brake Front & Rear Cylinder Assy. |
102 | Master Cylinder |
103 | Front & Rear Brake Cam |
104 | Air Pressure Pipes |
105 | Brake pipe |
106 | Diaphagram Washer of Brakes |
107 | Window Glasses and Front wind shield:-Scope of work shall include Providing and fitting of damagedwind screen along with beading with new oneas per details below (triplex laminated) |
108 | Front Glass/Wind Shield Triplex laminated with rubber beeding and other allied fittings |
109 | window Glass Right |
110 | Window Glass Left |
111 | Fan Belt set |
112 | TATA Xenon & TATA Yodha |
113 | Scope of work: Maintenance Rate Contract for repairs/replacement of damaged spare parts including scheduled servicing (as and when required) of departmental(Pickup)vehicles of following details: Make: TATA Model: Xenon & Yodha Year of manufacturing: 2020 & 2022 The job includes disassembling, removal of damaged/worn out/outserviced items and reassembling after replacement by new one. the job includes P/F of the following items |
114 | Schedule servicing |
115 | Moil grade 20w40 (6 liters per service) |
116 | P/F of Oil filter |
117 | P/F of Fuelfilter elementdelphi |
118 | P/F of Fuel pre- filter element |
119 | P/F of Air cleaner element. |
120 | P/F ofGear oil Change 80W90 (10 liters per service) |
121 | P/F ofBrake fluid (Dot-4).250 ML |
122 | P/F of Power steering fluid 500ml |
123 | Clutch system |
124 | Replacement of damaged Clutch plate by new one |
125 | Replacement of damaged Pressure plate by new one |
126 | Replacement of Clutch release bearing |
127 | Replacement of Clutch oil seal |
128 | Replacement of Clutch cable |
129 | Suspension system |
130 | Replacement of Front wheel inner bearing |
131 | Replacement of Front wheel outer bearing |
132 | Replacement of Front wheel oil seal |
133 | Replacement of Steering Tie rod end |
134 | Replacement of Steering centre pin bush |
135 | Replacement of Steering Ball joint |
136 | Replacement of Complete suspension bush kit |
137 | Replacement of Rear brake shoe set (set of 2 pairs) |
138 | Replacement of Rear brake wheel cylinder |
139 | Replacement of Rear wheel bearing |
140 | Replacement of Disc pad set |
141 | Replacement of Calliper set |
142 | Replacement of Brake fluid 200ml |
143 | Replacement of Providing/fitting of disc rotor |
144 | Replacement of Providing/fitting of front breake disc pads |
145 | Providing of skilledmechanic shall capable to hadle all kinds of mechanical automobile jobs included providing of tools & tackels required for thr job. |
146 | Silencer |
147 | Repairs to silencer by way of gas welding the job included dismounting & remounting of silencer |
148 | Silencer tail pipe |
149 | Electrical system |
150 | Replacement of Alternator cut out |
151 | Replacement of Alternator rectifier plate |
152 | Replacement of Alternator bearing |
153 | Replacement of Alternator brush set |
154 | Replacement of Fan belt |
155 | Self starter. |
156 | Replacement of Self bush |
157 | Replacement of Self bearing |
158 | Replacement of Solenoid switch |
159 | Replacement of Battery 80 AH |
160 | Replacement of Battery terminal and thimbles & rebuilding of battery Poles |
161 | Replacement of Head light assembly |
162 | Replacement of Side indicator assembly |
163 | Replacement of Back light assembly |
164 | Replacement of Horn assembly |
165 | Replacement of Back light bulb |
166 | Replacement of Side indicator bulb |
167 | Replacement of Horn relay / Horn |
168 | Replacement of Wiper blade set |
169 | Replacement of Wiper arm set |
170 | Body side |
171 | Replacement of Door handle ( Outside ) |
172 | Replacement of Door handle ( Inside ) |
173 | Replacement of Door trim |
174 | Replacement of Door glass sliding handle |
175 | Replacement of Door lock |
176 | Replacement of Side mirror (L/R) |
177 | Repairing of damaged body by way of Welding/denting/painting of various spots on the body |
178 | Providing & fixing of back carriage seating arrangement by way of fabrication of MS frame work, which includes P/F of 19 mm laminated ply board,foam with synthetic/letherite leather The following items are rquired for the job: i) MS frame work: =50 mm dia,3.6 thick MS pipe=10 meters =35x35x4mm equal angles=19 meters =35x3mm MS flats =06 meters =4 mm thick MS flat=02 Sq.ft = 50 mm dia MS Bends =04 No"s ii) 19 mm Waterproof Ply: =3.0no x 4.0 x 0.30 Sq.m=3.6 Sq.m iii) Foam & letherite as per requirement for the dimensions reflected for item iii above. The is inclusive of cutting, welding, finishing, fixing and nuts & bolts and all other allied jobs required for completion of the job. providing of rear glass protection grill of 1 inch sq square mesh with 2mm wire dia. the job also includes applying of red oixde prime coat & 2 coats of paints. to all MS structures |
179 | Providing & fixing of seat covers for seats of cabin front & rear side. The seat covers shall be made out of high density velvetclothin desired shade as directed. The seat cushionshall be as per size of the seats fixedwith necessary clips etc. |
180 | Suspension System |
181 | Replacement of leaf spring U bolts( Rear) |
182 | Replacement of leaf spring centre bolt( Rear) |
183 | Shakel pin/bolt ( Rear) |
184 | Replacement of leaf spring clip with bolt( Rear) |
185 | Steering System |
186 | Wheel alignment |
187 | Differential |
188 | Differential Assembly |
189 | Bevel and Pinion Gear |
190 | Star Gear |
191 | Star set |
192 | Replacement of Diff. Stud |
193 | Replacement of U-J Cross |
194 | Replacement of Cross Holder |
195 | Replacement of Coupling |
196 | Replacement of Central Bearing. Assembly Complete |
197 | Departmental Sewer cleaning Machine (TATA) |
198 | Schedule Servicing:- The job shall include providing and filling of POL"s and spares as and when required |
199 | Providing and Filling Engine oil grade 20 w 40 |
200 | Providing and Fitting Oil filter + Bosh 6D 2525-181-30139 |
201 | Providing and Fitting Fuel filter (water separator) 2527-091-20259 |
202 | Providing and Fitting Air cleaner element. Primary 2786-091-39908 |
203 | Providing and Fitting Air cleaner element. Secondary 2786-091-39909 |
204 | Providing and Fitting Water body Assembly |
205 | Providing and Fitting Gear oil Change 80 W 90 |
206 | Providing and Filling Hydraulic oil 68 Grade |
207 | Propeller Shaft:- Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
208 | Machining job of the Propeller shaft along withproviding and fitting of Universal Joint and clampsThe jobincluded dismantling of propeller shaft from the vehicle at site and the propeller shaft was taken to the contractor’s workplace for further execution of job over the Lathe machine. During machining, torsions were checked thoroughly and rectified. Both the ends of the propeller shaft were cut. A new half yoke was fitted by way of welding along with a new universal joint and cross holder .The alignment of the assembly was finished and checked over the lathe machine once again. The spares once fitted and assembled were checked over Lathe machine to ensure the zero error before proceeding further .After the job is complete the same was carried back to the site for further fitment to the machine,. The machine was tested thoroughly after fitment for ascertaining the quality of the job. |
209 | U-J Cross |
210 | Cross Holder |
211 | Coupling |
212 | HalfYoke |
213 | Central Bearing with rubber Assembly Complete |
214 | Shaft Bolts with Nuts and Washer. |
215 | Main brake booster pipe |
216 | Clutch Plate |
217 | Pressure plate |
218 | Clutch Release Bearing. With Hub |
219 | Fly Wheel Ring |
220 | Fly Wheels Bolts |
221 | Suspension System:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
222 | Augmentation of Leaf Springs(Rear):The job shall include dismantling of the rear wheel spring assembly of the vehicle completely on both sides, one at a time with the help of jacks. The leaf springs shall be cleaned and hammered/tempered by jack devices up to the required shape and requisite tension , followed by greasing. Two numbers of new leaf springs are to be added on both sides by putting the leaf spring in position and inserting the mounting bolts and retainer Nuts at each end to secure the springs to the rear hanger. The U Bolt brackets are to be placed around the leaf spring and rear axle. The whole operation shall comprise replacement of, eyelet bolts from the eye bushes, shackle pins, center bolts, U Clamp with bolt washers, rear hanger washer and other requisite spares. The whole assembly shall be fitted back to the vehicle and greased properly to make the assembly work smoothly. |
223 | Re-Arching of the existing for rearsuspension :The job shall include dismantling of the rear wheel spring assembly of the vehicle completely on both sides, one at a time with the help of jacks. The leaf springs shall be cleaned and hammered/tempered by jack devices up to the required shape and requisite tension , followed by greasing. Two numbers of new leaf springs are to be added on both sides by putting the leaf spring in position and inserting the mounting bolts and retainer Nuts at each end to secure the springs to the rear hanger. The U Bolt brackets are to be placed around the leaf spring and rear axle. The whole operation shall comprise replacement of, eyelet bolts from the eye bushes, shackle pins, center bolts, U Clamp with bolt washers, rear hanger washer and other requisite spares. The whole assembly shall be fitted back to the vehicle and greased properly to make the assembly work smoothly. |
224 | Augmentation of Leaf Springs (Front):The job shall include dismantling of the rear wheel spring assembly of the vehicle completely on both sides, one at a time with the help of jacks. The leaf springs shall be cleaned and hammered/tempered by jack devices up to the required shape and requisite tension , followed by greasing. Two numbers of new leaf springs are to be added on both sides by putting the leaf spring in position and inserting the mounting bolts and retainer Nuts at each end to secure the springs to the rear hanger. The U Bolt brackets are to be placed around the leaf spring and rear axle. The whole operation shall comprise replacement of, eyelet bolts from the eye bushes, shackle pins, center bolts, U Clamp with bolt washers, rear hanger washer and other requisite spares. The whole assembly shall be fitted back to the vehicle and greased properly to make the assembly work smoothly. |
225 | Re-Arching of the existing for Frontsuspension :The job shall include dismantling of the rear wheel spring assembly of the vehicle completely on both sides, one at a time with the help of jacks. The leaf springs shall be cleaned and hammered/tempered by jack devices up to the required shape and requisite tension , followed by greasing. Two numbers of new leaf springs are to be added on both sides by putting the leaf spring in position and inserting the mounting bolts and retainer Nuts at each end to secure the springs to the rear hanger. The U Bolt brackets are to be placed around the leaf spring and rear axle. The whole operation shall comprise replacement of, eyelet bolts from the eye bushes, shackle pins, center bolts, U Clamp with bolt washers, rear hanger washer and other requisite spares. The whole assembly shall be fitted back to the vehicle and greased properly to make the assembly work smoothly. |
226 | Re-Arching of the existing for rearsuspension :The job shall include dismantling of the rear wheel spring assembly of the vehicle completely on both sides, one at a time with the help of jacks. The leaf springs shall be cleaned and hammered/tempered by jack devices up to the required shape and requisite tension , followed by greasing. Two numbers of new leaf springs are to be added on both sides by putting the leaf spring in position and inserting the mounting bolts and retainer Nuts at each end to secure the springs to the rear hanger. The U Bolt brackets are to be placed around the leaf spring and rear axle. The whole operation shall comprise replacement of, eyelet bolts from the eye bushes, shackle pins, center bolts, U Clamp with bolt washers, rear hanger washer and other requisite spares. The whole assembly shall be fitted back to the vehicle and greased properly to make the assembly work smoothly. |
227 | Wheel System :-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
228 | Front Wheel oil seal |
229 | Tie Rod Ball Set |
230 | F/WBearings. Inner |
231 | F/W Bearings. Outer |
232 | Front brake lining sets |
233 | Rear brake lining sets |
234 | Slack Adjuster Automatic |
235 | Real wheel oil seal |
236 | R/w Bearings. Inner |
237 | R/w Bearings. Outer |
238 | Wheel Cam bush |
239 | Wheel Cam oil Seal |
240 | FuelInjection Pump:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
241 | Complete Overhauling /calibration, including replacement of worn out/ necessary items |
242 | Rotary Pump Unit |
243 | Nozzle |
244 | Steering System:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
245 | Steering. Cross |
246 | Steering. Oil |
247 | Steering filter |
248 | Self starter :-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
249 | Armature Assembly |
250 | Self Carbon bush set |
251 | Self bearing |
252 | Bendex Drive |
253 | SolenoidSwitch |
254 | Field Coil Set |
255 | Battery Lead 8 AWG gaugemultistrendwith copper Thimbles and terminals etc. Both negative and positive |
256 | Battery 12 volts180AH |
257 | Re-building ofbattery poles. |
258 | Ignition switch |
259 | Alternator Assembly:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
260 | Rectifier plate |
261 | Carbon Bush Set |
262 | Cut out |
263 | Armature Assembly |
264 | Bearing |
265 | Silencer:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
266 | Joint & Bolts |
267 | Silencer Gas Welding and Patching |
268 | Radiator Assembly;-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
269 | Radiator Cup |
270 | Hose pipe Sets upper & lower with Clamps |
271 | Radiator Leakage Arrest by way of soldering, carbon leakage testing, cleaning of radiator cooling fins & servicing. Besides the job shall include dismounting & remounting of radiator by way of engaging of skilled machanic on the job. |
272 | Electrical Works:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
273 | New T-Horn Assembly Double |
274 | Head Light Assy. |
275 | Head Light bulb |
276 | Tail light bulb |
277 | Indicator bulb |
278 | Tail light Assy |
279 | Cab. Light |
280 | Side Indicator Assy. |
281 | Combination Switch. |
282 | Ignition switch |
283 | Brake System:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
284 | F/W Brake Lining Set with Rivets |
285 | Rear/W Brake Lining Set with Rivets |
286 | Brake Front & Rear Cylinder Assy. |
287 | Master Cylinder |
288 | Front & Rear Brake Cam |
289 | Air Pressure Pipes |
290 | Brake pipe |
291 | Diaphagram Washer of Brakes |
292 | Window Glasses and Front wind shield:-Scope of work shall include Providing and fitting of damagedwind screen along with beading with new oneas per details below (triplex laminated) |
293 | Front Glass/Wind Shield with rubber beeding |
294 | window Glass Right |
295 | Window Glass Left |
296 | Fan Belt set |
297 | JETTING SYSTEM:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
298 | Overhauling, repairs & replacement of spares ofjetting reciprocating pumps of sewer cleaning machinesof serial no 79/14 & 81/14 Pump type D6.5/20 WASP PUMP PRIVATE LTD.The job shall included dismounting & remounting of complete pump from the machine dismantalling there of, replacement of all damaged/worn out spares to keep the pump operational complete. |
299 | VACUUM PUMP SYSTEM:-Scope of work shall include Providing and fitting of damaged/ wornout spareparts with new one as per details below |
300 | Repairs to Sucking pump make Battioni Pagani (CE) sorbolo(parma) Itali Mec 13500 P LF DX D100 .Sno 448871 & 448370 year 2014.Mx. Pressure 1.5(bar), Vaccuum-0.95, power(kw) 36 , Reves (rpm) 1400 , Capacity (1/min) 13845, weight (g) 164.of sewer cleaning machine bearing no 0772-JK01AB & 6145-JK01AB, The job shall include dismounting of complete suction pump from the machine, Shifting to work shop of contracting agency dismantalling thereof. The jo0b shall included replacement of all damaged spares viz, bearing 02no, fiber blades, o-rings, copper pipe with adopter, oil seal & gasket kit complete job.Besides the job shall further includefinshing of uneven bore suface of suction pump by way of grinding, honing & polishing finishing of rottor bearing seats by way of machineing job.Re-assembling & remounting of sucker pump on machine after caried out necessary repairs, checking the performance of pump unit on full load. |
301 | Providing & fixing of PTO electronuematic valve 24 volt. |
302 | Ball valve (jetting pipe)25mm dia of SS/GM material in single piece, heavy duty, shallworking pressure 3000 /4000 bar maximum pressure of CIM make or any other reputed make as per the sample.. |
303 | Welding repairs to tank buffer wall by way of providing & fixing of6 mm MS plateISA 32/50 mm/as per site requirment. The job shall furhter include straighten, bending, cutting, hosting & welding complete job, applying two coats of red oxide coat after preparing the surface smooth by way of using of grinder, emaray paper etc. |
304 | Repairs to high pressure jetting pipe p/f of end joints /connections & adopters crimping collers as per samplehydraulically/electricallyoperated crimping machine to the HP- jetting hose 25mm ID with working pressure 3000PSI sewer cleaning machine. |
305 | Providing & fixing of jetting hose pipe 25mm inner dia1 mt longwith end connections.Working pressure 3000 bar /PSI. |
306 | Providing & fixng of (Sewer sucking pipe)100 mm dia,wire braided synthatic rubber/PVCmaterialwith highsuction resistance 4.5 mt long included providing & fixning of end fitting/ coupling & decoupling system for quick operation as per sample. |
307 | Providing & fixing of tempered wind screen (laminated) 5 mm thick for the vehicles.The job shallincluded providing of all fitting materials to the frame for fixing of glass, which includes replacement ofdamaged rubber beading. |
308 | Providing & fixing of transparent5 mm thick glass for windows for cabin .The job shallincluded providing of all fitting materials to the frame for fixing of glass, which includes replacement ofdamaged rubber/aluminiumbeading. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail