Food Corporation Of India-FCI has published Tender For Replacement Of Ac Sheet Of All Godownwith Iron Profile Sheet At Fsd Chandpur Bulandshahr.. Submission Date for this Tender is 12-12-2023. Profiles Tenders in chandpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 23-Nov-2023 | Non Applicability of undertaking related to MSEs as for 2012 | Other | 12-12-2023 |
Sl. No. | Item Description |
1 | Demolishing cement concrete manually/ by mechanicalmeansincluding disposal of material within50 metres lead as per directionof Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). |
2 | Taking out old wind ties from roof including cutting out rusted bolts nuts etc and removing materials to any distance within compound and stacking. |
3 | Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of :AC Sheet |
4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
5 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
6 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm). |
7 | Fixing old wind tie with new fittings including painting two or more coats with anticorrosive bituminastic paint of approved brand and manufacturee over and including priming coat of ready mixed zinc chromate yellow yellow primer of approved brand |
8 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. |
9 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep without chase cutting |
10 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase |
11 | Supply ,installation ,testing and commissioning of turbo ventilators size 22"" in stainlesssteel 430grade with approximate weight 4.85kg having a CFM-7KM per hours -2440 with blade lengh 360mm wings of 80 mm and following specification.Turbo ventilators available in stainless steel,Size 22"" SS grade :430 ,No of outer wings:24(22""),,No of inner wings:6(422""), Fan base:Nylon,Top and Bottom SS 430, Inside Material :Nylon.,Fan Blade OD:600mm(for 22""),Nylon Blade Ring :560mm(for 22"),Total fan height :360mm (for 22"),Self-lubricating bearing . |
12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
13 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached plasters,columns,piers, abutments,pillars,struts,buttresses,string or lacing courses,parapets,coping,bed blocks,anchor blocks,plain window sills,fillets,sunken floor etc. upto floor five level, excluding cost of centering, shuttering and finishing 1:2:4 (1 Cement:2 Coarse Sand (zone-III derived from natural sources:4 graded stone aggregate 20 mm nominal size derived from natural sources) |
14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
15 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
16 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) |
17 | Dismantling Rolling shutter including dismembering and stacking within 50 metres lead |
18 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S laths with 1.25 mm thick top cover |
19 | Providing and fixing hard drawn steel wire fabric mesh of weight not less than 7.75kg per sqm for door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and T iron 70x35x6mm central cross piece. |
20 | CREDIT FOR:- Dismantaled old G.I sheet ,G.I ridge,J orL hooks,GI washers and MS wind ties s as and where is basis including loading ,unloading and transportation outsideFCI premises Old GI sheets ,GI plain ridges,G.I J orL hooks with nuts,GI washers and wind ties |
21 | CREDIT FOR:- Dismantaled old AC Sheet as and where is basis including loading ,unloading and transportation outsideFCI premises , AC Sheet |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail