Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-usefor One course of pressed tile roof finish in Cement Mortar as directed by the departmental officers |
| 2 | Dismantling, clearing away and carefully stacking materials useful for re-usefor Doors & windows including removal of frames, hinges and fastenings as directed by the departmental officers |
| 3 | Dismantling, clearing away and carefully stacking materials useful for re-usefor any thickness of walls Brick / stone masonry in Cement mortar walls under 3m high. |
| 4 | Removing and relocating Stone ornamental columns as specified and as directed by the departmental officers |
| 5 | Dismantling, clearing away and carefully stacking materials useful for re-usefor floor finish and dadooing walls in cement mortar with mosaic tiles/ glazed tiles / cuddapah slabs etc., as directed by the departmental officers |
| 6 | Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site etc., complete complying with standard specification. |
| 7 | Refilling in basement with excavated earth in layers of not more than 15cm thick well rammed watered and consolidated complying with standard specifications. |
| 8 | Supplying and filling in foundation, basement, etc with filling Crushed Stone Sand (M-sand) and in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 9 | Cement Concrete 1:5:10 (One Cement, Five M-sand and Ten hard broken stone jelly)using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification. |
| 10 | Brick work in Cement Mortar 1:5 (One Cement and Five M-Sand)using best quality II class ground moulded chamber burnt bricks of size 9\" x 4-3/8\" x 2-3/4\" including neat finishing, curing, etc., complete complying with standard specifiction. |
| 11 | For Superstructure In Ground Floor |
| 12 | Cement Concrete 1:3:6 (One Cement, Three M-sand and Six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three Sand and Six hard broken stone jelly).Dummy columns should be at least 1 metre height) |
| 13 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three M-Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 14 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise andsimilar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M-sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 15 | Flooring with ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M-Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 16 | Dadooing walls with Colour designed digital print ceramic tiles, with borders, with size of 300mm x 450mm x 8mm and above set in Cement Mortar 1:2 (One Cement and Two M-sand)10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. nbatly in all floors, curing, etc,,complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be like Johnson / Kajaria / Somany / Nitco / RAK or Equivalent which has to be got approved by Executive Engineer before use on works) |
| 17 | Doing Double nosing for granite statue pedestal and steps charges including all other charges etc., complete complying with standard specification. |
| 18 | Pointing the existing stone cladding on the wall with cement mortar 1:3 mixed with weathering compound as per directions by Architect/engineer in charge. |
| 19 | Supply and fixing Granite stone column, Beam hooks and columns base of heritage type of design and dimensions as per architectural drawing. |
| 20 | Providing and fixing the ornamental granite bracket of size 0.45 x 0.15 x 0.10m for the wall runners of thazhvaram wherever required as per directions from CA/engineer in charge |
| 21 | Providing and Fixing the Wooden Rafter Beams of different sizes for supporting on roof Tiles and sunshade tiles. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers and All thematerials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 22 | Providing and laying mangalore tiles on the sloped pitched roof whereever required, above double layered wooden reapers, flat ceiling tiles ensuring no water leakage and covering ridge using ridge tile as specified by Conservation Architect and engineer. (approved heritage data) |
| 23 | Supply and fixing II class Teak wood for frames 100x75mm size of door including all material and labour charges for teak wood wrought and put up in position and the size and section as per the architural drawings & Specification |
| 24 | Teak Wood Scantlings 2m in length |
| 25 | Teak Wood Scantlings 2mto 3m in length |
| 26 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three P-sand), 12mm thick with Plasticizerin all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 27 | Plastering with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick with Plasticizer in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 28 | Supplying and fixing of Solid core Flush shutters with Teak ply on one side and commercial ply pasting with Mica on other side with teak wood lipping alround35 mm thick conforming to I.S.12406\1989 with 35x12mm T.W. lipping on all edges with necessary adhesive and C.P.Screws, including fixing ofaldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish, for T.W. lipping thinner colouring agent etc, and aluminium anodised 125mm size hinges 3 nos best quality of aluminium anodised fittings of 200 mm, tower bolt 1 no 150mm tower bolts 1 nos,250mm aldrops 16mm dia rod 1 no125mm long handle 2 nos 40mm dia nylon bush 1no, door stoper 1 No shall be provided. The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all other incidental charges handling charges etc., complete complying with standard specification.The sample of materials and fittings should be got approved by the Engineer-in-charge before use on works. (Single leaf) |
| 29 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong lockingsystems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work |
| 30 | Titan Std Series Cubicles: Approx Sizes (W x D x H) 1000mm x 1550mm x 2100mm (Height is including 150mm gap from bottom) Door Size- 610 mm |
| 31 | Painting two coats of newly plastered wall surface with ready mixed Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 32 | Painting two coats of newly plastered wall surface with ready mixed Plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 33 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 34 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 35 | Provision of false wall of height 2.1 metres and thickness 0.1m made using a frame work of 1\" x 2\" aluminium extruded box sections as frame work. On one side the frame workshall be covered using a 19mm thk marine water proof ply finished with two coats of putty and 2 coats Premium satin emulsion in required colour. |
| 36 | Supply of plywood panelling for museum inner wall portion etc., complete |
| 37 | Providing and fixing Display case using alluminium extruded section of size 25mm x 50mm and a thickness of 3.18mm and all faces covered using19mm th marine plywood joined together using glue and screws, and 25mm waterproof plywood pedestal for keeping artefacts (600x600mm), all faces of display should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. artifact displaycase should be secured with 8mm th. toughened ultra clear glass with necessary opening using SS hinges and lock mechanism. total size of the plywood display box 700 x 700 x 450 mm and 700 x 700 x 1000mm glass box for covering the artefacts, executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boards and also to provide prvisions for electrical light fixtures. Colour and of the paint and other accessories should be as per drawing detail for display D1 provided by the architect. (Display Name D1) |
| 38 | Providing and fixing Display case over the plywood wall panelling cut in shape as shown in the drawing over all size 1400 x 2600mm using 19mm th. marine plywood joined together using glue and screws, wall panelling to be installed above aluminium extruded sections of size 25mm x 50mm and a thickness of 3.18mm, above the panelling installing 12mm th. marine plywood display boards 3 in no. of varying sizes 400 x 735mm, 700 x 880mm and 400 x 880mm all faces of panelling and display board should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after thorough sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. also providing and pasting Vinyl text sheet above the display board, colour of the panelling and Board to be as per drawing provided for the Display D2 and accessories should be as per drawing detail provided by the architect. (Display Name - D2) |
| 39 | Providing and fixing Display box case over the plywood wall panelling using 25mm th marine plywood joined together using glue and screws, four wall panelling to be fixed above wall size of panelling 400 x 1905mm and installing 12mm th. display board above wall panelling of size 300 x 600mm, display case to be made using 19mm th. of size 2020 x 400mm using marine plywood with 12mm th. front sheet of size 2020 x 130 fixed in an angle for pasting vinyl information graphics and fixing at the height mentioned in the drawing. all the plywood faces of display and panelling should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. after keeping the artefacts on the display box it needs to be covered using box made from ultra clear 8 mm th. glass with necessary opening as per drawing and using SS glass to glass hinges and and glass to cabinet bracket with cabinet lock to secure the artefacts. Providing and installing acrylic holders and inside the glass enclosure to place artefacts information boards and also providing and pasting vinyl print over the information boards, colour and of the paint and other accessories should be as per drawing detail provided by the architect. (Display Name - D3) |
| 40 | Providing and fixing plywood wall panelling of size 1000 x 2100 x 100mm with niches for keeping artefacts to be made using 19mm th. marine plywood joined together using glue and screws, wall panelling to be installed above aluminium extruded sectionsof size 25mm x 50mm and a thickness of 3.18mm, above the panelling installing 12mm th. marine plywood display racks 6 inno. 150 x 75mm 3 in no. and one display board of size 200 x 230mm. all faces of panelling andand display board should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after thorough sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. also providing and pasting Vinyl text sheet above the display board, and 8mm th. ultra clear glass with wall to glass SS hinge and glass to wall cabinet lock for locking and securing artefacts inside the niches, colour of the panelling and Board to be as per drawing provided for the Display D4 and accessories should be as per drawing detail provided by the architect. (Display Name - D4) |
| 41 | Providing and fixing wall panelling using 25mm th. fixed directly onto the wall of size 2800 x 2100mm making rear box in L-shape with dimension 500 x 400x 180 height of 2100mm and base pedestal of size 2800 x 1325 x 100mm using 19mm th. marine plywood joined together using glue and screws. all the plywood faces of display and panelling should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after every layer of putty and paint to acheive smooth surface. after completion fixing display D5 and placing D6 to the location mentioned in the drawingshown in the drawing of D7. Providing and pasting vinyl print over the information boards, colour and of the paint and other accessories should be as per drawing detail provided by the architect. (Display Name - DD/(D5,D6) ) |
| 42 | Providing and fixing Display box case with over hang at the ht. 2100mm using 19mm th marine plywood and aluminium extruded section of size 25mm x 50mm and a thickness of 3.18mm, joined together using glue and screws, size of the bottom box 700 x 400x 700mm with box backing of size 700x 75 x 1300mm and top box with a cutout to fix light fixture of size 700x 400 x100 mm. inside the Main box fixing 12mm th. 2 no. display board of size 500 x 200 and 2 no. of 19mm th. racks/brackets to hold artefacts of size 150 x 500 to be fixed in the main display box along with on 12mm th. text display board fixed at an angle above 25mm th. water proof plywood pedestal of size 500 x 200 and640 x 295 respectively. providing and pasting vinyl information graphics and fixing at the heights and location mentioned in the drawing. all the plywood faces of display and panelling should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. after keeping the artefacts on the display box, it needs to be covered using box made from ultra clear 8 mm th. glass with necessary opening as per drawing and using SS glass to glass hinges and and glass to cabinet bracket with cabinet lock to secure the artefacts. |
| 43 | Providing and installing acrylic holders and inside the glass enclosure to place artefacts information boards and also providing and pasting vinyl print over the information boards, colour and of the paint and other accessories should be as per drawing detail provided by the architect. (Display Name - D7) |
| 44 | Providing and fixing Display case using alluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm and all faces covered using19mm th marine plywood of size 1500 x 450 x 725 joined together using glue and screws, and 25mm waterproof plywood pedestal for keeping artefacts of size (1450x400mm) above the pedestal varyning sizes of small pedestal of 12mm and 25mm th. marine plywood are to be fixed as per drawing provided, all faces of display should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. artifact displaycase should be secured with 8mm th. ultra clear glass with necessary opening using SS glass to slass hinges, Glass to wall brackets and cabinet lock mechanism. total size of the glass box for covering the artefacts 1500 x 450x 300 , executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boards and providing and pasting vinyly prints above display boards and to provide prvisions for electrical light fixtures whereeer necessary. Colour of the paint and other accessories should be as per drawing detail for display D8 provided by the architect.(Display Name - D8) |
| 45 | Providing and fixing Display case using alluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm and all faces covered using19mm th marine plywood with stepped base of size 2000 x 400 x 50 and 1940 x 340 x 50 respectively above which fixing four no. of pedestal having base made of 25mm th. marine plywood of size 350 x250 and upper body of the box made using 19mm th. plywood of size300 x 200 x 600, top pedestals to be fixed with 12mm th. dispaly panel in marine plywood fixed at an angle to the pdestals, all the elements of the displayto be fixed/joined together using glue and screws, and 25mm waterproof plywood pedestal for keeping artefacts of size (150x250mm), all faces of display should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. Artifact displaycase should be secured with 4 no. of boxes made using 8mm th. ultra clear glass with necessary opening using SS glass to slass hinges, Glass to wall brackets and cabinet lock mechanism. total size of the glass box for covering the artefacts 200 x 300x 200 , executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boards and providing and pasting vinyly prints above display boards and to provide prvisions for electrical light fixtures whereeer necessary. Colour of the paint and other accessories should be as per drawing. (Display Name - D16) |
| 46 | Providing and fixing Book frame type operable display board with 19mm th. Marine plywood board backing and 25mm th plywood frame afround the backing of size1100 x 800 the display is to be done in book pattern using 10mm th. plywood sheet having cutout for 5mm acrylic sheet acrylic sheet and plywood to be joined together using silicon glue, 25mm th. information panel also to be provided abobe the book panel of size 1100 x 150mm . all the plywood faces of display and panelling should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. Executing agency also has to provide and fix the custom madeacrylic boards with laser etched text on the surface of the sheet, and providing and pasting vinyl sheet information text as mentioned in the display drawing of D17. |
| 47 | Providing and fixing Display case using alluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm and all faces covered using19mm th marine plywood of size 1000 x 500 x 725 with 25mm th. plywood band at the bottom joined together using glue and screws, and 25mm waterproof plywood pedestal for keeping artefacts of size (950x450mm) above the pedestal varyning sizes of small pedestal of 12mm and 25mm th. marine plywood are to be fixed as per drawing provided, all faces of display should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. artifact displaycase should be secured with 8mm th. ultra clear glass with necessary opening using SS glass to slass hinges, Glass to wall brackets and cabinet lock mechanism. total size of the glass box for covering the artefacts 1000 x 500x 300mm , executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boards and providing and pasting vinyly prints above display boards and to provide prvisions for electrical light fixtures whereeer necessary. Colour of the paint and other accessories should be as per drawingprovided by the architect. (Display Name - D18) |
| 48 | Providing and fixing Display case using alluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm and all faces covered using19mm th marine plywood with stepped base of size 1800 x 500 x 100 above which fixing three no. of pedestal having body of the box made using 19mm th. plywood of size 300 x 300 x 700, on top of the box spedestal in 25mm th. marine plywood of size 250 x250mm to be fixed. All the elements of the display to be fixed/joined together using glue and screws,all faces of display should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. Artifact displaycase should be secured with 2 no. of boxes made using 8mm th. ultra clear glass with necessary opening using SS glass to slass hinges, Glass to wall brackets and cabinet lock mechanism. total size of the glass box for covering the artefacts 300 x300x300mm , executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boards and providing and pasting vinyly prints, wallpapers above display boards/walls and to provide prvisions for electrical light fixtures wherever necessary. Colour of the paint and other accessories should be as per drawing provided by the architect. (Display Name - D19) |
| 49 | Providing and fixing Display case using alluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm and all faces covered using19mm th marine plywood with stepped base of size 1800 x 500 x 100 above which fixing four no. of which three pedestal having body of the box made using 19mm th. plywood of size 300 x 300 x 700 and one having the size of 300 x 450 x 700 on top of the boxes pedestal in 25mm th. marine plywood of size 250 x250mm and 250 x 400to be fixed. All the elements of the display to be fixed/joined together using glue and screws,all faces of display should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. three pedestal display box cases should be secured with boxes made using 8mm th. ultra clear glass with necessary opening using SS glass to slass hinges, Glass to wall brackets and cabinet lock mechanism. total size of the glass box for covering the artefacts 300 x300x300mm, Big pedestal is to be provided with a bust statue of Former Chief Minister of Tamil Nadu C. N. Annadurai. executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boards and providing and pasting vinyly prints above display boards and to provide prvisions for electrical light fixtures wherever necessary. Colour of the paint and other accessories should be as per drawing. (Display Name - D22) |
| 50 | Providing and fixing Display case using alluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm and all faces covered using19mm th marine plywood of size base box size 200 x 200 x500 and 300x 300 x200 top display box, fixed/joined together using glue and screws, and 25mm waterproof plywood pedestal for keeping artefacts of size (200 x 200mm), all faces of display should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface.artifact displaycase should be secured with 8mm th. ultra clear glass with necessary opening using SS glass to slass hinges, Glass to wall brackets and cabinet lock mechanism. total size of the glass box for covering the artefacts 300 x 300x 500 , executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boards and providing and pasting vinyly prints above display boards and to provide prvisions for electrical light fixtures whereeer necessary. Colour of the paint and other accessories should be as per drawing detail for display D9 provided by the architect. (Display Name - D9) |
| 51 | Providing and fixing Display box case over the plywood wall panelling using 19mm th marine plywood joined together using glue and screws, wall panelling to be fixed above aluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm, size of panelling 700 x 2100 mm and installing 19mm th. display box above wall panelling of size 350 x 350 x 100mm, all the plywood faces of display and panelling should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after every layer of putty and paint to acheive smooth surface. after keeping the artefacts on the display box it needs to be covered using box made from ultra clear 8 mm th. glass with necessary opening as per drawing and using SS glass to glass hinges and and glass to cabinet bracket with cabinet lock to secure the artefacts. Providing and installing acrylic holders, mirror to place artefacts information boards and coins and also providing and pasting vinyl print over the information boards, colour and of the paint and other accessories should be as per drawing detail provided by the architect. (Display Name - D10) |
| 52 | Providing and fixing musical instrument display box case over the plywood wall panelling using 19mm th marine plywood joined together using glue and screws, wall panelling to be fixed above aluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm, size of panelling 1740 x 2100 mm and installing 19mm th. display box above wall panelling of size 600 x 600 x 800mm(bottom box) and 600 x 600x 100mm top box with cut out for light fixture pedestal made using 19mm th. marine plywood also to be fixed of size 500 x 500mm . all the plywood faces of display and panelling should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after every layer of putty and paint to acheive smooth surface. after keeping the artefacts on the display box it needs to be covered using box made from ultra clear 8 mm th. glass of size 600 x600x 1190mm with necessary opening as per drawing and using SS glass to glass hinges and and glass to cabinet bracket with cabinet lock to secure the artefacts. Providing and installing acrylic holders to place artefacts information boards and also providing and pasting vinyl print over the information boards, colour and of the paint and other accessories should be as per drawing detail provided by the architect. (Display Name - D11) |
| 53 | Providing and fixing Musical Instrument display box case with over hang at the ht. 2100mm using 19mm th marine plywood and aluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm, joined together using glue and screws, size of the bottom box 600 x 770x 800mm with box backing of size 1100x 770 x 100mm and top box with a cutout to fix light fixture of size 600x 770 x100 mm. inside the Main box fixing 19mm th. plywood pedestal of size 650 x 460. providing and pasting vinyl information graphics and fixing at the heights and location mentioned in the drawing. all the plywood faces of display and panelling should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. after keeping the artefacts inside the display box, it needs to be covered using box made from ultra clear 8 mm th. glass with necessary opening as per drawing and using SS glass to glass hinges and and glass to cabinet bracket with cabinet lock to secure the artefacts of size 770x600x1190mm. Providing and installing acrylic holders and inside the glass enclosure to place artefacts information boards and also providing and pasting vinyl print over the information boards, colour and of the paint and other accessories should be as per drawing detail provided by the architect. (Display Name - D12) |
| 54 | Providing and fixing Musical Instrument display box using 19mm th marine plywood and aluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm, joined together using glue and screws, size of the bottom box 1500 x 500x 700mm inside the Main box fixing 19mm th. plywood pedestal of size 1360 x 360 x 50mm all the plywood faces of display and panelling should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. after keeping the artefacts inside the display box, it needs to be covered using box made from ultra clear 8 mm th. glass with necessary opening as per drawing and using SS glass to glass hinges and and glass to cabinet bracket with cabinet lock to secure the artefacts of size 1500x500x400mm. Providing and installing acrylic holders and inside the glass enclosure to place artefacts information boards and also providing and pasting vinyl print over the information boards, colour and of the paint and other accessories should be as per drawing detail provided by the architect. (Display Name - D13) |
| 55 | Providing and fixing window frame openable type display board with 19mm th. Marine plywood board backing and picture frame of solid teak wood of size 30x20mm cross section fixed in frame and finsihed using melamine polish colour and texture as approved by teh architect. wooden frame is to be made operable using concealed brass hinges. all the plywood faces of display and panelling should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. Executing agency also has to provide and fix the custom made wall paper on the wooden frame with ultra clear 8 mm th. glass to secure the art work, size of the display panel is 900 x 1600mm and to be executed as per the drawing. (Display Name - D14) |
| 56 | Providing and fixing Display case using alluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm and all faces covered using19mm th marine plywood with stepped base of size 2500 x 600 x 100 above which fixing two no. of pedestal having body of the box made using 19mm th. plywood of size 500 x 500 x 500, on top of the box smaller box of size 250x250 x 100mm to be fixed, both the display boxes above base need to be fixed with a display wall of size 1400 x 1400 on an aluminium extruded section frame all faces of frame to be covered with 12mm th. marine plywood. All the elements of the display to be fixed/joined together using glue and screws,all faces of display should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. Artifact displaycase should be secured with 2 no. of boxes made using 8mm th. ultra clear glass with necessary opening using SS glass to slass hinges, Glass to wall brackets and cabinet lock mechanism. total size of the glass box for covering the artefacts 500 x500x800mm , executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boards and providing and pasting vinyly prints, wallpapers above display boards/walls and to provide prvisions for electrical light fixtures wherever necessary. Colour of the paint and other accessories should be as per drawing. (Display Name - D15) |
| 57 | Providing and fixing plywood wall panelling of size 2500 x 2100 x 100mm with arched niches for keeping artefacts to be made using 19mm th. marine plywood joined together using glue and screws, wall panelling to be installed above frame work of aluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm. Niches to be cut in Shape and size as shown in the drawing. all faces of panelling andand display board should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after thorough sanding using dry and wet sand paper after every layer of putty and paint to acheive smooth surface. also providing and pasting Vinyl text and custom wall paper sheet above the display board and wall panelling. Providing an operable panel with 8mm th. ultra clear glass with wall to glass SS hinge and glass to wall cabinet lock for locking and securing artefacts inside the niches, colour of the panelling and Board to be as per drawing provided for the Display D20 executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boardsand to provide prvisions for electrical light fixtures wherever necessary. (Display Name - D20) |
| 58 | Providing and fixing stepped Display case using alluminium extruded sectionof size 25mm x 50mm and a thickness of 3.18mm and all faces covered using19mm th marine plywood with stepped base of size 600 x 800 x 500 and 600 x300x 200mm respectively above which fixing two no. of pedestal having body of the box made using 25mm th. plywood of size 500 x 400 and 500 x 200 respectively ,stepped display box is to be fixed to a base omade using aluminium extruded section and covered using 19mm th. plywood of size 1000 x 840 x 75mm and placed alone the wall panelling of size 840 x 2100 x 100 made in 19mm th. waterproof plywood, All the elements of the display to be fixed/joined together using glue and screws,all faces of display should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. Artifact displaycase should be secured with 2 no. of boxes made using 8mm th. ultra clear glass with necessary opening using SS glass to slass hinges, Glass to wall brackets and cabinet lock mechanism. total size of the two glass boxes for covering the artefacts is 600 x500x200mm and 600 x 300 x 200mm , executing agency is also supposed to provide acrylic standies for information plackard, text printing on acrylic boards and providing and pasting vinyly prints, wallpapers above display boards/walls and to provide prvisions for electrical light fixtures wherever necessary. Colour of the paint and other accessories should be as per drawing. (Display Name - D21) |
| 59 | Setting up saree room (a) procurement, repairs and restoration of a life size vintage hand loom (thari) to be displayed as the central piece of the gallery. The thari will have to be repaired and polished with lac polish, all intact and set up in the centre of the room. The loom should be a traditional 4w throw shuttle pit loom of minimum size 3.5m in length. a raised pit loom shall be set up by the contractor in available space. (b) Providing and fixing wall panelling on extruded aluminium section frame work, using 19mm th. Waterproof plywood to the ht. of 2100mm, above the Wall panelling fixing of Information boards made using 12mm th. water proof plywood and all faces of panelling and display board should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. after painting providing and pasting vinyl information print on the Display board and also providing and fixing framed and printed picture frames showcasing saree making process of Kancheepuram, and also providing cutouts for for wiring and any other electrical requirement for fixing the LED TV panel and LIght Fixture. colour of the paint and other accessories should be as approved by the architect.(Contd....) |
| 60 | (c) Providing and fixing wall panelling on extruded aluminium section frame work, using 19mm th. Waterproof plywood to the full ht. of the room, above the Wall panelling fixing of Information panels made using 12mm th. water proof plywood and display board made in an angle using 12mm th. waterproof plywood and all faces of panelling and display panels and board should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface.after completion of painting providing and pasting vinyl information print on the Display panels and boards, wall panelling and also providing and fixing life sized accessories used in making of Kanchipuram saree. above the ht. of 2.1m procuring and fixing kanchipuramSilk saree on the wall panelling, above a cusshioned foam backing. executing agency is also supposed to provide cutouts and other provisions for fixing light fixtures and wiring etc. colour of the paint and other accessories should be as approved by the architect. Contd.... |
| 61 | (d) Providing and fixing wall panelling on extruded aluminium section frame work, using 19mm th. Waterproof plywood to the ht. of 2100mm, above the Wall panelling fixing of Information boards made using 12mm th. water proof plywood and all faces of panelling and display board should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. after painting providing and pasting vinyl information print on the Display board and also providing and fixing Silk saree in the display box and encloseing the same in 8mm th. ultra clear glass using necessary openings using accessories like SS glass to glass hinges, SS Glass to wall supports and Cabinet Locking mechanism. Executing agency is also directed to procurerestore and fix original accessories used in making of kanchipuram sarees like spinning wheel, needles, bobbins etc. colour of the paint and other accessories should be as approved by the architect. |
| 62 | (e) Providing and fixing Ceiling saree panel on extruded aluminium section frame work, using 19mm th. above the ceiling panel fixing of silk saree on foam backing using pin nails and staples, all faces of panelling and display board should be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. colour of the paint and other accessories should be as approved by the architect. (f) Providing and fixing wall panelling on extruded aluminium section frame work, using 19mm th. Waterproof plywood to the ht. of 2100mm, in side the panelling making provision for niche to display silk threads, all faces of panelling along with nicheshould be finished using glossy two coats duco paint with pressurized spray machine, applied over two layers of metal putty and a layer of primer paint after through sanding using dry and wet sand paper after evry layer of putty and paint to acheive smooth surface. after painting providing and pasting vinyl information print on thepanelling and also providing and fixing Silk threds of various colours in theniche made inside the panelling using acrylic sthadies, encloseing the same in 8mm th. ultra clear glass using necessary openings using accessories like SS glass to wall hinges and Cabinet Locking mechanism. Executing agency is also directed to provide cutouts for other electrical works and fixture in the dipla panel as per requirement, colour of the paint and other accessories should be as approved by the architect. |
| 63 | Supplying and fixing of Premium Quality branded European Water Closet with \"P\" or \"S\" trap and with ISI mark. The cost is include of double flappedPVCseat cover, PVC pipe 110mm dia and all internal fittings and with necessary CI brackets, 12mm brass nipple 15mm dia chromium plated brown headed stop cock of approved quality with ISI mark and nylon connection including fixing the same to wall and giving necessary water supply connection with all internal fittings with labour charges. The European water closet should be fixed on the floor using counter sunk bolts and nuts and necessary teakwood plugs, clamps, screws etc., including dismantling the floor or wall wherever necessary and redoing the same to their original condition etc., complete |
| 64 | Supplying and fixing of Best Quality branded Gem rectangle wash basin with necessary fittings cost includes transportation, labour and other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 65 | Supplying and fixing of Best Quality Project two way BIB tap including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 66 | Supply of Rafael bench in provincial teak finish from pepperfry,chennai |
| 67 | Providing and laying Wooden laminate flooring as per specified by the architect/engineer in charge |
| 68 | Supplying and fixing in position of best quality and brand mirror of size 600 x 450 x 5.5mm thick mirror of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on works) |
| 69 | Supplying and fixing in position of best quality and brand soap tray fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The soap tray should be got approved by the Executive Engineer before use on works) |
| 70 | Supplying and fixing in position of best quality and brand towel rail fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The towel rail should be got approved by the Executive Engineer before use on works) |
| 71 | Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications.The UPVC pipes shall be got approved by Executive Engineer before use on works.(Above Ground Level) (Internal Water supply) |
| 72 | 25mm dia UPVC pipe |
| 73 | 20mm dia UPVC pipe |
| 74 | 15mm dia UPVC pipe |
| 75 | Supplying and fixing in position of the following UPVC specials best approved quality conforming to ISS and providing leak proof joints with PVC adhesiveetc, including fixing to walls with necessary teak wood plugs screws etc. and giving connections to the UPVC pipe dismantling the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc. complete complying with standard specifications. (The UPVC specials should be got approved from the Executive Engineer before use on works). |
| 76 | 25mm dia UPVC Elbow |
| 77 | 20mm dia UPVC Elbow |
| 78 | 15mm dia UPVC Elbow |
| 79 | 25mm dia UPVC Tee |
| 80 | 20mm dia UPVC Tee |
| 81 | 15mm dia UPVC Tee |
| 82 | 25mm dia UPVC Union |
| 83 | 20mm dia UPVC Union |
| 84 | 15mm dia UPVC Union |
| 85 | 25mm dia UPVC Bend |
| 86 | 20mm dia UPVC Bend |
| 87 | 25x20mm dia UPVC Reducer |
| 88 | 20x15mm dia UPVC Reducer |
| 89 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 90 | 110mm dia PVC soil / waste pipe |
| 91 | 75mm dia PVC soil / waste pipe |
| 92 | Supplying and fixing in position of the following PVC specials best approved quality conforming to ISS and providing leak proof joints with PVC adhesiveetc, including fixing to walls with necessary teak wood plugs screws etc. and giving connections to the PVC pipe dismantling the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc. complete complying with standard specifications. (The PVC specials should be got approved from the Executive Engineer before use on works). |
| 93 | 110mm dia PVC Elbow |
| 94 | 75mm dia PVC Elbow |
| 95 | 110mm dia PVC Elbow with Door |
| 96 | 75mm dia PVC Elbow with Door |
| 97 | Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level. Using perforated sheets (10mm thick) |
| 98 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate)powder type Fire Extinguisher of 6 kgs capacity as per IS:15683 with pressure gauge,discharge hose& control nozzle,wall mounting bracket,safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc completeas per standard specification and as directed by the departmental officers.Make: EXCELLENT/SAFETY FIRST / EQUIVALENT |
| 99 | Supply and fixing of carbon-di-oxide Gas type 2 kg capacity Fire Extinguisher as perNew IS No.15683complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc completeas per standard specification and as directed by the departmental officers.Make: EXCELLENT/SAFETY FIRST / EQUIVALENT |
| 100 | Supply and kept in position of Trolley Mounted Type 22.5 kg. Carbon-di-Oxide Fire Extinguisher as per IS15683, complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip, etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 101 | Supply and kept in position of Trolley Mounted Water CO2Stored Pressure Type 50 litres capacity Fire Extinguisher as per IS13385, complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip, etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 102 | GST @ 18 % |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
