Tender For Furnishing Of Information Center And Temple Facility Under Samalei Plan At Maa Samaleswari Temple, Sambalpur Furniture, sambalpur-Odisha

Furnishing Of Information Center And Temple Facility Under Samalei Plan At Maa Samaleswari Temple, Sambalpur Furniture , Café Pod Table ( 800 X 800 X 738 ) Of Godrej Make , Café Pod With Rubberwood Top Pu Coated Size Shall800 Width Mmx 800 Depth Mm X 738 Height Mm. Top Shall Be Of Rubber Wood Size : 800 Mm X 800 Mm X 18 Mm Thick With Pu Coating Of 18 Mm Thick . The Top Has A Stiffener Made In Rubber Wood . Top Surface Is Coated With Pu Coating Of 3H Hardness . The Bottom Surface Has A Sealer Coating . Top Is Fitted To The Understructure With No. 8 X 16 Philip Head Screw Also Top Is Made In 2 Finishes Wenge And Natural . Understructure Shall Be Foldable And Stackable , Made With Combination Of Aluminium And Plastic . Centre Column Is Of Aluminium Extrusion Of Diameter 70 Mm , Which Is Anodized . Base Is Made In 2 Pieces Of Die Cast Aluminium With Buffed Finish . It Is Bolted Together With Centre Column And Top Flange . , Dining Chair Without Arm Unwind Of Godrej Make , The Seat And Back Should Bemade Up Of Injection Moulded Indoor Grade Polypropylene Compound Seat Size : 52.5 Cm. ( W ) X 53.2 Cm. ( D ) Back Size : 51.6 Cm. ( W ) X 40.5 Cm. ( H ) The Powder Coated ( Dft 50±10 Microns ) Welded Tubular Frame Should Bemade From 0 2.22 ± 0.03 Cm X 0.16 ± 0.0128 Cm And 3.5 ± 0.03 Cm X 1.5 ± 0.03 Cm X 0.16 ± 0.0128 Cm Mserw Tube. The Shoes Should Bemade Of Indoor Grade Polypropylene Compound And Snap Fitted With Tubular Frame. , Time Out Table 4 Seater Of Godrej Make , Time Out 4 Seater Pu Coated Size Shall Be1135 Width Mmx 1175 Depth Mmx 750 Height Mm. Top Shall Be 25 Mm Thick Base Material Shall Be 25 Mm Mdf Board . On Top Pu Painting Of Minimum 2H Hardness With 75% Glass As Per Color Chart .Combination Color Graphics On The Centre . Brown Laminate On Bottom Specially Profiled Edges For Comfort . The Understructure Shall Be Having Bend Pipe Structure Of Ms Powder Coated . Pipe Dia 38 Mm , 2 Mm Thick And It Shall Be Fitted With Top By Ss Machine Screws . Legs Shall Be Of Ms Powder Coated And 38 Mm Dia. Pipe Legs Are Fixed With Inderstructure And Table Top . Glide Shall Be Of Plastic Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking .. The Main Desk Of Maestro Shall Be Of Size 1800 Width Mm X 900 Depth Mm X 750 Height Mm.The Table Top Shall Be 25 Mm Thick Mfc ( Melamine Faced Chipboard ) Also There Should Be 30 Mm Mdf ( Medium Density Fiberboard ) Black Pad.The Modesty Panel Shall Beof18 Mm Thick Mfc ( Melamine Faced Chipboard ) .The Leg Of The Main Desk Shall Be Of 25 Mm Mfc Plus 30 Mm Mdf Right And Left Pad.The Main Table Should Be Ofduck Noise Profile Edge In Order To Enhance The Workspace Aesthetics. , Receiption Table Reflection 5Ft Of Godrej Make , Work Surface:Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Access Flap Provided On Work Surface For Wire Management.Wire Management:Power Box Made With 0.8 Mm Thick Crca ( Is: 513 ) , With Switch Plate ( 8+3 Module Cutout Provision For Anchor Roma ) . This Is Fixed With Worktop Along The Width At Access Flap Position. Modesty Panel & Side Skirting:Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Understructure:Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lippin.Top Shelf:Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Hinge Door + Drawer Unit:Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.**Drawer Bottom Is Made Of 5.5Thk Mdf White Board Handle Is Provided For Ease Of Opening.Hdu And Drawer Is Provided With Cam Lock For Security.Essential Accessories:Wire Riser Made Of 0.8Mm Crca ( Is-513 ) Is Provided For Proper Wire Management.Organizer Plate Made Of 1.2Mm Crca ( Is-513 ) Is Provided For Magnetic Sticky Notes. Bag Hanger Hook Made Of 1.2Mm Crca ( Is-513 ) Is Provided For Bag Hanging. , Aero Mid Back Chair Make Of Godrej Make , Seat / Back A Ssembly: The Seat Is Made Up Of 1.2 + 0.1Cm Thk. Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-Pl14-18.The Back Is Made Up Of Injection Mou1ded Glass Filled Nylon & Upholstered Using Mesh Fabric With High Tenacity Yarn.“ Seat Size ( Standard Seat Depth ) 47.0 Cm. ( W ) X 49.5 Cm. ( D ) * Back Size : 45.0 Cm. ( W ) X 65.3 Cm. ( H ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45+ / -2 Kg / M° And Hardness 16 + 2 Kgf As Per Is:7888 For 25% Compression.Armrests : The Adjustable Armrest Is Designed With The Following Features : • Up-Down Adjustment— 8 Steps ( 8 0+0.Scm Range ) • Height Adjustable Armrest Structure Which Is Powder Coated & Fitted With An Armrest Top. • Fixed Armrest Top Is Pu Moulded Over Metal Insert.Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric.The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pa6. Lumbar Pad Has An Adjustment Of 8.0 + 0.5 Cm In Height.Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designedwith The Following Features. • 360° Revolving Type.• Single Point Control.• Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort.Tilt Tension Adjustment. • 4-Position Locking With Anti-Shock Feature. • Seat / Back Tilting Ratio Of 1:2. Pneumatic Height Adjustment. The Pneumatic Height Adjustment Has An Adjustment Stroke Oi 10.0 + 0.3 Cn°.Pedestal Assembly : The Pedestal Is Injection Moulded In Black 30% Glass Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. H=The Pedestal Pitch Center Dia Is 66.1+0.5 Cmtwin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon. , Waiting Chair 3 Seater Matrix Of Godrej Make , The Seat Shell Should Bea Welded Assembly Of Seat, Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ) . The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm ( W ) X 44.6 Cm ( D ) * Back Size : 41.6 Cm ( W ) X 23.0 Cm ( H ) Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ) .The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment . Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ) . Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. , Table Work 5026 ( 1500 X 750 X 740 ) Of Godrej Make , Work - 5026 Size Shall Be1500 Width X 750 Depth X 740 Height . The Top Shall Be Made From 25 Mm Thick Pre- Laminated Board . Allthe Edges Are Sealed With 2 Mm Thick Pvc Edge Band All Around . Side Panels Shall Be Made From 25 Mm Thick Pre- Laminated Paticle Board . All The Edges Are Sealed With 2 Mm Thick Pvc Edge Band On Theuser Side And 0.8 Mm On The Top And Bottom Side .The Side Panels Have 2 Glide Screws Each For Levelling Of The Desk. Modestypanel Shall Be Made From 18 Mm Thick Pre- Laminated Particle Board . All The Edges Are Sealed With 0.8 Mm Thick Pvc Edge Band All Around. Freestanding Pedestal Shall Be Made From 18 Mm Pre- Laminated Particle Board With A Combination Of 2 Mm And 0.8 Mm Pvc Edge Band On All The Exposed Surfaces As Per Requirement . The Drawers Are Provided With Suitable Slides For Smooth Operation . All The Pedestal Drawers Are Centrally Locked With A Single Key . , Aero Mid Back Chair Of Godrej Make , Seat / Back A Ssembly: The Seat Is Made Up Of 1.2 + 0.1Cm Thk. Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-Pl14-18.The Back Is Made Up Of Injection Mou1ded Glass Filled Nylon & Upholstered Using Mesh Fabric With High Tenacity Yarn.“ Seat Size ( Standard Seat Depth ) 47.0 Cm. ( W ) X 49.5 Cm. ( D ) * Back Size : 45.0 Cm. ( W ) X 65.3 Cm. ( H ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45+ / -2 Kg / M° And Hardness 16 + 2 Kgf As Per Is:7888 For 25% Compression.Armrests : The Adjustable Armrest Is Designed With The Following Features : • Up-Down Adjustment— 8 Steps ( 8 0+0.Scm Range ) • Height Adjustable Armrest Structure Which Is Powder Coated & Fitted With An Armrest Top. • Fixed Armrest Top Is Pu Moulded Over Metal Insert.Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric.The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pa6. Lumbar Pad Has An Adjustment Of 8.0 + 0.5 Cm In Height.Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designedwith The Following Features. • 360° Revolving Type.• Single Point Control.• Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort.Tilt Tension Adjustment. • 4-Position Locking With Anti-Shock Feature. • Seat / Back Tilting Ratio Of 1:2. Pneumatic Height Adjustment. The Pneumatic Height Adjustment Has An Adjustment Stroke Oi 10.0 + 0.3 Cn°.Pedestal Assembly : The Pedestal Is Injection Moulded In Black 30% Glass Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. H=The Pedestal Pitch Center Dia Is 66.1+0.5 Cmtwin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon. , Sofa 2 Seater Pisa Of Godrej Make , The Seat Should Bemade Of Pu Foam With Density 32 ± 2 Kg / Cu.Mtr Having An Additional Top Layer Of J Pu Foam With Density 28 ± 2 Kg / Cu. Seat Should Beupholstered With Fabric Or Leatherette. 2 ) Back Foam: The Back Should Bemade Of Pu Foam With Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 23±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Bemade Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywoodocp-Qlta-Pl14-18 4. Dia 4Mm Zigzag Spring Assembly Should Bemounted In Understructure For Support And Additional Cushioning Purpose .T Should Bea Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate. , Opulentcoffee Table Of Godrej Make , Features:Sturdy Shesham Wood Frame, Solid Wooden Legs, And Tempered Glass Top.Luxurious Aesthetic That Is Neatly Lined With The Form And Shape Of The Table.• Versatile Glass Top In A Neutral Colour And Contrasting Darker Legs In Walnut Shade.• Easy To Maintain, With Ground Clearance For Cleaning.• 2 Additional Drawers That Let You Keep Small Accessories Handy. ( 131.0Cm X 70 Cm X 38.0Cm ) , Table Work 5026 ( 1500 X 750 X 740 ) Of Godrej Make , Work - 5026 Size Shall Be1500 Width X 750 Depth X 740 Height . The Top Shall Be Made From 25 Mm Thick Pre- Laminated Board . Allthe Edges Are Sealed With 2 Mm Thick Pvc Edge Band All Around . Side Panels Shall Be Made From 25 Mm Thick Pre- Laminated Paticle Board . All The Edges Are Sealed With 2 Mm Thick Pvc Edge Band On Theuser Side And 0.8 Mm On The Top And Bottom Side .The Side Panels Have 2 Glide Screws Each For Levelling Of The Desk. Modestypanel Shall Be Made From 18 Mm Thick Pre- Laminated Particle Board . All The Edges Are Sealed With 0.8 Mm Thick Pvc Edge Band All Around. Freestanding Pedestal Shall Be Made From 18 Mm Pre- Laminated Particle Board With A Combination Of 2 Mm And 0.8 Mm Pvc Edge Band On All The Exposed Surfaces As Per Requirement . The Drawers Are Provided With Suitable Slides For Smooth Operation . All The Pedestal Drawers Are Centrally Locked With A Single Key . , Aero Mid Back Chair Of Godrej Make , Seat / Back A Ssembly: The Seat Is Made Up Of 1.2 + 0.1Cm Thk. Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-Pl14-18.The Back Is Made Up Of Injection Mou1ded Glass Filled Nylon & Upholstered Using Mesh Fabric With High Tenacity Yarn.“ Seat Size ( Standard Seat Depth ) 47.0 Cm. ( W ) X 49.5 Cm. ( D ) * Back Size : 45.0 Cm. ( W ) X 65.3 Cm. ( H ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45+ / -2 Kg / M° And Hardness 16 + 2 Kgf As Per Is:7888 For 25% Compression.Armrests : The Adjustable Armrest Is Designed With The Following Features : • Up-Down Adjustment— 8 Steps ( 8 0+0.Scm Range ) • Height Adjustable Armrest Structure Which Is Powder Coated & Fitted With An Armrest Top. • Fixed Armrest Top Is Pu Moulded Over Metal Insert.Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric.The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pa6. Lumbar Pad Has An Adjustment Of 8.0 + 0.5 Cm In Height.Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designedwith The Following Features. • 360° Revolving Type.• Single Point Control.• Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort.Tilt Tension Adjustment. • 4-Position Locking With Anti-Shock Feature. • Seat / Back Tilting Ratio Of 1:2. Pneumatic Height Adjustment. The Pneumatic Height Adjustment Has An Adjustment Stroke Oi 10.0 + 0.3 Cn°.Pedestal Assembly : The Pedestal Is Injection Moulded In Black 30% Glass Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. H=The Pedestal Pitch Center Dia Is 66.1+0.5 Cmtwin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon. , Ayush Lite Sheet Bed Withoutconference Table Conclave 10 Seater ( 3200 * 1200 * 750 ) Of Godrej Make , Conclve 10 B. Conv1200 D Size Shall Be3200 Width Mmx 1200 Depth Mm X 750 Height Mm . Top Work Surface Shall Be 12 Mm Thick Tougher Glass With Back Painted Design On To Under Side And Crystal Edge Polish Finish . The Construction Shall Be Knock Down Construction . Theunderstructure Shall Have All Panels Made From 36 Mm Thick Pre-Laminated Board With 2 Mm Thick Pvc Edge Beading . Understructure Also Consists Of Storage For Cpu , Projector And Paper Storage . Provision For Glass Adjustment For Glass Aligning . The Wire Management Shall Have Legrand Electricals Used For Wire Management On Tocentre Support Beam Panel And Cpu Storage Area For Socket Connections , Rj11, Rj45 . , High Back Chair Marvel Of Godrej Make , The Chair Should Be Greenguard Certified And Conform To Bifma Leve 2 Furniture Sustainability Standard. The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Seat Size : 47.0 Cm. ( W ) X 48.0 Cm. ( D ) . The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. The Back Size: 47.7 Cm. ( W ) X 76.4 Cm. ( D ) .The Armrest Top Should Be Moulded From Polyurethane ( Pu ) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps.The Adjustable Tilting Mechanism Should Be Designed With The Following Features: • 360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat / Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated.Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Back Frame Should Be Connected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. , Mid Back Chair Marvel Of Godrej Make , The Chair Should Be Greenguard Certified And Conform To Bifma Leve 2 Furniture Sustainability Standard.The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Seat Size : 47.0 Cm. ( W ) X 48.0 Cm. ( D ) . The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. The Back Size: 47.7 Cm. ( W ) X 60.1 Cm. ( D ) .The Armrest Top Should Be Moulded From Polyurethane ( Pu ) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps.The Adjustable Tilting Mechanism Should Be Designed With The Following Features: • 360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat / Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated.Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Back Frame Should Be Connected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. , Aristo Main Desk ( 2100X2250x750 ) With Eru Attached Pedestal + Back Unit ( 2350X500x1800 ) Of Godrej Make , Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top.Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top.Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm.Drawers Have A Soft Closing & Anti Slam Mechanism.Handles Are Provided For Ease Of Opening.Pedestals Are Provided With Lock For Security. , Lasede High Back Chair Of Godrej Make , 1 ) Seat / Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather.Seat Size : 47.6 Cm. ( W ) X 49.2 Cm. ( D ) Back Size : 47.5 Cm. ( W ) X 77 Cm. ( D ) 2 ) Armrests: The Armrest Top Should Bemoulded From Polyurethane ( Pu ) , Upholstered In Pure Leather And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps.3 ) Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features:• 360° Revolving Type.• Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort.• Tilt Tension Adjustment Can Be Operated In Seating Position• 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat / Back Tilting Ratio Of 1: 2• The Mechanism Housing Should Bemade Up Of Hpdc Aluminium Black Powder Coated4 Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 6.0±0.5 Cm. 5 Adjustable Back Support: Back Frame Should Beconnected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need Pneumatic Ht. Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm.7 Pedestal Assembly The Pedestal Should Behigh Pressure Die Cast Polishedaluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) 8. Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Mouldedin Black Polypropylene. , Lasede Visitor Chair Of Godrej Make , 1 ) Seat / Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. ( W ) X 49.2 Cm. ( D ) Back Size : 46.5 Cm. ( W ) X 59.5 Cm. ( D ) 2 ) Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece , Sofa 3 Seater Majesta Of Godrej Make , Features:Durable And Ergonomic Statement Piece Made From Pure Leather Upholstery At Prominent Touch Points.• Clearly Visible Top Grains Of Leather Adds To Its Aesthetic Appeal, With Soft Foam At Armrest And Backrest For Added Comfort.• Chesterfield Design On The Backrest Lends It A Premium, Unique Look And Feel.• Seasoned Solid Wood Frame And A Plywood Cross Section In The Understructure Ensures Durability.• Sturdy Rubber Wood Rounded Legs That Can Easily Take Heavy Loads, Giving You The Freedom To Sit On It As You Like Without Fearing Damage. , Opulentcoffee Table Of Godrej Make , Features:Sturdy Shesham Wood Frame, Solid Wooden Legs, And Tempered Glass Top.Luxurious Aesthetic That Is Neatly Lined With The Form And Shape Of The Table.• Versatile Glass Top In A Neutral Colour And Contrasting Darker Legs In Walnut Shade.• Easy To Maintain, With Ground Clearance For Cleaning.• 2 Additional Drawers That Let You Keep Small Accessories Handy. ( 131.0Cm X 70 Cm X 38.0Cm ) , Single Bed Adrian Of Godrej Make , Overall Size :Length - 2060.0 Mmwidth - 1131.0 Ram Height - 945.0 Mm Material:Bed Structure Consist Of Metal Frames Made Of M.S. Channels In 1.0 Mm Thickness.Horizontal Plinths And Bottom Plinth Are Made Of 25 Mm Thick Prelaminated Particle Board.Head Board Is Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed To It.Tail Board Is Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed To It. Side Rail Is Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed On To It.Mattress Panels Of Bed Are Made Of 18 Mm Thick Prelaminated Particle Board With All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Construction :Knock Down Construction.Packets : 1 Bed In 1 Packets. Finish :18 Mm Thick Prelaminated Particle Board Is In Walnut Shade. Metal Frames Are Powder Coated In Shade Mat Black To The Thickness Of 50 Microns ( +-10 ) . , Mattress Swing 7836 Of Godrej Make , Mattress , Pillow Of Godrej Make , Pillow , Adriana Bedside Table Of Godrej Make , Overall Size : Depth - 450.0 Mm Width - 440.0 Mm Height - 510.0 Mm Material : Body And Drawer Panels Of Bed Side Table Are Made Of 18 Mm Thick Prelaminated Particle Board. All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Side Panels Are Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trim Fixed On To It. Hardware : The High Quality Hardware Used Like Roller Slides, Hinges , Minifix, Dowels Is Of Make Hettich.. Construction : Knock Down Construction.Packets : 1 Packet. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Walnut Shade. , Adriana 2 Door Wardrobe Of Godrej Make , Overall Size Including Top Cornice : Width - 946.0 Mm Depth - 598.0 Mm Height - 1941.0 Mmmaterial :Body Panels Are Made Of 18 Mm Thick Prelaminated Particle Board.All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding.Door Are Made Of 18 Mm Thick Prelaminated Particle Board With All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Side Panel Are Made Of 18 Mm Thick Prelaminated Particle Board With All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvcedge Banding And With Imported H.D.F. Foil Wrapped Decorative Trim Fixed On To It. Drawer Components Are Made Of 18 Mm Thick Prelaminated Particle Board .All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Body Back And Drawer Bottom Are Made Of 8 Mm Thickprelaminated Particle Board.Top Cornice Is Made Of Imported H.D.F. Foil Wrapped Decorative Trim. Hardware : The High Quality Hardware Used Like Roller Slides, Hinges , Minifix, Wooden Dowels Is Of Make Hettich.. Lock Used For Main Door Is 3 Way Lock And Lock Used For Drawer Is Cam Lock Construction : Knock Down Construction. Packets : 2 Packet. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Walnut Shade. , Slotted Angle Rack 6 Ft Of Godrej Make , H-6Ft X W-3Ft X D-1.5Ft

INR 7080 /-

INR 30300.0 /-

INR 30.30 Lakhs /-

Name of Work: Furnishing of Information counter and Temple facility under SAMALEI Plan at Maa Samaleswari Temple, Sambalpur- “FURNITURE”

Sl. No.	Item Description
1	Café Pod Table (800 x 800 x 738) of Godrej Make
2	Café Pod With Rubberwood Top PU Coated size shall800 Width mmx 800 Depth mm x 738 Height mm. Top shall be of Rubber Wood size : 800 mm x 800 mm x 18 mm thick with PU coating of 18 mm thick . The top has a stiffener made in rubber wood . Top surface is coated with PU coating of 3H hardness . The bottom surface has a sealer coating . Top is fitted to the understructure with No. 8 x 16 philip head screw also top is made in 2 finishes wenge and natural . Understructure shall be foldable and stackable , made with combination of aluminium and plastic . Centre column is of Aluminium extrusion of diameter 70 mm , which is anodized . Base is made in 2 pieces of die cast aluminium with buffed finish . It is bolted together with centre column and top flange .
3	DINING CHAIR WITHOUT ARM UNWIND of Godrej Make
4	The Seat and Back should bemade up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should bemade from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should bemade of indoor grade PolyPropylene compound and snap fitted with tubular frame.
5	Time Out Table 4 Seater of Godrej Make
6	Time Out 4 Seater PU Coated size shall be1135 Width mmx 1175 Depth mmx 750 Height mm. Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .. The main desk of Maestro shall be of size 1800 Width mm x 900 Depth mm x 750 Height mm.The table top shall be 25 mm thick MFC (Melamine Faced Chipboard) also there should be 30 mm MDF (Medium density fiberboard) black pad.The modesty panel shall beof18 mm thick MFC (Melamine faced chipboard).The leg of the main desk shall be of 25 mm MFC plus 30 mm MDF right and left pad.The main table should be ofduck noise profile edge in order to enhance the workspace aesthetics.
7	Receiption Table Reflection 5ft of Godrej Make
8	Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap provided on work surface for wire management.Wire Management:Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Understructure:Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lippin.TOP shelf:Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Hinge Door + Drawer unit:Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.**Drawer bottom is made of 5.5thk MDF white board Handle is provided for ease of opening.HDU and Drawer is provided with cam lock for security.Essential Accessories:Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management.Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging.
9	Aero Mid Back Chair Make of Godrej Make
10	"SEAT/BACK A SSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn.“ SEAT SIZE(Standard Seat Depth) 47.0 cm. (W) x 49.5 cm. (D) * BACK SIZE : 45.0 cm. (w) x 65.3 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS : The adjustable armrest is designed with the following features : • Up-Down adjustment— 8 steps (8 0+0.Scm range)• Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designedwith the following features. • 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 + 0.3 cn°.Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. H=The pedestal pitch center dia is 66.1+0.5 cmTWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon."
11	Waiting Chair 3 Seater Matrix of Godrej Make
12	" The seat shell should bea welded assembly of seat,back and side frame. The seat and back should bemade of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should bewelded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should bepowder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H)Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should bepowder coated ( DFT 40-60 microns ).The leg assembly should befitted with shoes and levellers in Nylon. The leg structure should bedesigned with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould beof uneven flooring.Connecting beam should befitted with snap locking end cap.lt also aids in side-by-side understructure alignment . Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should bemade up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should bepowder coated ( DFT 40-60 microns ). Armrest pad should beinjection molded in Nylon and should befitted onto the armrest frame.
13	Table Work 5026 (1500 x 750 x 740) of Godrej Make
14	Work - 5026 size shall be1500 Width x 750 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . Allthe edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on theuser side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modestypanel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .
15	Aero Mid Back Chair of Godrej Make
16	"SEAT/BACK A SSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn.“ SEAT SIZE(Standard Seat Depth) 47.0 cm. (W) x 49.5 cm. (D) * BACK SIZE : 45.0 cm. (w) x 65.3 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS : The adjustable armrest is designed with the following features : • Up-Down adjustment— 8 steps (8 0+0.Scm range)• Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designedwith the following features. • 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 + 0.3 cn°.Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. H=The pedestal pitch center dia is 66.1+0.5 cmTWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon."
17	Sofa 2 Seater Pisa of Godrej Make
18	The seat should bemade of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should beupholstered with fabric or leatherette. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywoodOCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should bemounted in understruCture for support and additional cushioning purpose .t should bea welded assembly made in Stainless steel (grade SS 202) tube & plate.
19	OpulentCoffee Table of Godrej Make
20	Features:Sturdy Shesham wood frame, solid wooden legs, and tempered glass top.Luxurious aesthetic that is neatly lined with the form and shape of the table.• Versatile glass top in a neutral colour and contrasting darker legs in walnut shade.• Easy to maintain, with ground clearance for cleaning.• 2 additional drawers that let you keep small accessories handy.(131.0cm x 70 cm x 38.0cm)
21	Table Work 5026 (1500 X 750 X 740) of Godrej Make
22	Work - 5026 size shall be1500 Width x 750 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . Allthe edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on theuser side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modestypanel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .
23	Aero Mid Back Chair of Godrej Make
24	"SEAT/BACK A SSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn.“ SEAT SIZE(Standard Seat Depth) 47.0 cm. (W) x 49.5 cm. (D) * BACK SIZE : 45.0 cm. (w) x 65.3 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS : The adjustable armrest is designed with the following features : • Up-Down adjustment— 8 steps (8 0+0.Scm range)• Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designedwith the following features. • 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 + 0.3 cn°.Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. H=The pedestal pitch center dia is 66.1+0.5 cmTWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon."
25	AYUSH LITE SHEET BED WITHOUTConference Table Conclave 10 Seater(3200 * 1200 * 750) of Godrej Make
26	Conclve 10 B. Conv1200 D size shall be3200 Width mmx 1200 Depth mm x 750 Height mm . Top work surface shall be 12 mm thick tougher glass with back painted design on to under side and crystal edge polish finish . The construction shall be Knock down Construction . TheUnderstructure shall have all panels made from 36 mm thick Pre-laminated board with 2 mm thick PVC edge beading . Understructure also consists of storage for CPU , projector and paper storage . Provision for glass adjustment for glass aligning . The Wire Management shall have Legrand electricals used for wire management on tocentre support beam panel and CPU storage area for socket connections ,RJ11,RJ45 .
27	High Back Chair Marvel of Godrej Make
28	"The Chair should be Greenguard certified and conform to Bifma leve 2 Furniture Sustainability Standard. The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. The BACK SIZE: 47.7 cm. (W) x 76.4 cm. (D).The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.The adjustable tilting mechanism should be designed with the following features: • 360" revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated.Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter."
29	Mid Back Chair Marvel of Godrej Make
30	"The Chair should be Greenguard certified and conform to Bifma leve 2 Furniture Sustainability Standard.The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. The BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D).The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.The adjustable tilting mechanism should be designed with the following features: • 360" revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated.Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter."
31	Aristo Main Desk (2100x2250x750) with ERU attached Pedestal + Back Unit ( 2350x500x1800 ) of Godrej Make
32	Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestals are provided with lock for security.
33	Lasede High Back Chair of Godrej Make
34	1) SEAT/BACK ASSEMBLY : The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather.Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 47.5 cm. (W) x 77 cm. (D) 2) ARMRESTS: The armrest top should bemoulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.3) ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should bedesigned with the following features:• 360° revolving type.• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• Tilt tension adjustment can be operated in seating position• 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2• The mechanism housing should bemade up of HPDC Aluminium black powder coated4 SEAT DEPTH ADJUSTMENT: Seat depth adjustment should beintegrated in the seat through a sliding mechanism. Seat depth adjustment range should beof 6.0±0.5 cm. 5 ADJUSTABLE BACK SUPPORT: Back Frame should beconnected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.7 PEDESTAL ASSEMBLY The pedestal should beHigh Pressure Die cast polishedAluminium and fitted with 5 nos. twin wheel castors. The pedestal should be65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)8. TWIN WHEEL CASTORS:The twin wheel castors should beinjection mouldedin Black Polypropylene.
35	Lasede Visitor Chair of Godrej Make
36	1) SEAT/BACK ASSEMBLY : The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D) 2) Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece
37	Sofa 3 Seater Majesta of Godrej Make
38	Features:Durable and ergonomic statement piece made from pure leather upholstery at prominent touch points.• Clearly visible top grains of leather adds to its aesthetic appeal, with soft foam at armrest and backrest for added comfort.• Chesterfield design on the backrest lends it a premium, unique look and feel.• Seasoned solid wood frame and a plywood cross section in the understructure ensures durability.• Sturdy rubber wood rounded legs that can easily take heavy loads, giving you the freedom to sit on it as you like without fearing damage.
39	OpulentCoffee Table of Godrej Make
40	Features:Sturdy Shesham wood frame, solid wooden legs, and tempered glass top.Luxurious aesthetic that is neatly lined with the form and shape of the table.• Versatile glass top in a neutral colour and contrasting darker legs in walnut shade.• Easy to maintain, with ground clearance for cleaning.• 2 additional drawers that let you keep small accessories handy.(131.0cm x 70 cm x 38.0cm)
41	Single Bed Adrian of Godrej Make
42	"Overall Size :Length - 2060.0 mmWidth - 1131.0 ram Height - 945.0 mm Material:Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it.Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Construction :Knock Down construction.Packets : 1 Bed in 1 packets. Finish :18 mm thick Prelaminated Particle Board is in Walnut shade. Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10)."
43	Mattress Swing 7836 of Godrej Make
44	Mattress
45	Pillow of Godrej Make
46	Pillow
47	Adriana Bedside Table of Godrej Make
48	"Overall Size : Depth - 450.0 mm Width - 440.0 mm Height - 510.0 mm Material : Body and drawer panels of Bed side table are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it. Hardware : The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich.. Construction : Knock Down construction.Packets : 1 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade."
49	Adriana 2 Door Wardrobe of Godrej Make
50	"Overall Size including top cornice : Width - 946.0 mm Depth - 598.0 mm Height - 1941.0 mmMaterial :Body panels are made of 18 mm thick Prelaminated Particle Board.All the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Door are made of 18 mm thick Prelaminated Particle board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panel are made of 18 mm thick Prelaminated Particle board with all the exposed edges are edge banded with 0.8 mm thick PVCedge banding and with imported H.D.F. foil wrapped decorative trim fixed on to it. Drawer components are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Body back and drawer bottom are made of 8 mm thickPrelaminated particle board.Top cornice is made of imported H.D.F. foil wrapped decorative Trim. Hardware : The high quality hardware used like Roller slides, Hinges , minifix,wooden dowels is of make Hettich.. Lock used for main door is 3 way lock and lock used for drawer is cam lock Construction : Knock Down construction. Packets : 2 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade."
51	Slotted Angle Rack 6 ft of Godrej Make
52	H-6ft x W-3ft x D-1.5ft