Tender For Renovation Of Old Silo And Other Constructions At Hurl-Gorakhpur, gorakhpur-Uttar Pradesh

Tender For Renovation Of Old Silo And Other Constructions At Hurl-Gorakhpur; 1 Civil Work 2 Surface Dressing Of The Ground Including Removing Vegetation And InEqualities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M. I ) All Kinds Of Soil 3 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed By Eic All Kinds Of Soil. 4 Providing And Laying In Position Cement Concrete Of Specified Grade Including The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 5 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 6 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 7 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 8 Providing And Laying Vitrified Tiles In Different Sizes ( Thickness To Be Specified By Manufacturer ) , With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 9 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Micronsminimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineerin-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 10 Repair To Plaster Of Thickness 12Mm To 20 Mm In Patches Of Area 2.5 Sqm And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing Plastering The Wall Surface With White Cement Based Polymer Modified Self Curing Mortar, Including Disposal Of Rubbish, All Complete As Per The Direction Of Engineer-In-Charge. 11 White Washing With Lime To Give An Even Shade : New Work ( Three Or More Coats ) 12 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 13 Cement Plaster ( In Coarse Sand ) 12 Mm Cement Plaster Of Mix : 1:4 ( 1 Cement: 4 Coarse Sand ) 14 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer 15 Finishing Walls With Water Proofing Cement Paint Of Required Shade : New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) 16 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr / 10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr / 10 Sqm 17 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 18 Demolishing R.C.C. Work By Mechanical Means And Stockpiling At Designated Locations And Disposal Of Dismantled Materials Ouside Plant Premises Or As Per Eic Instruction, Stacking Serviceable And Unserviceable Material Separately Including Cutting Reinforcement Bars Inside Plant. Cutting Of Rcc Shall Be Done By Diamond Cutter / Grinder / Any Other Means With Proper Cutting And Finishing Including Shuttering At Height, Scaffolding Or Any Necessary Arrangement Required For Successful Completion Of Work At Height. 19 Providing And Fixing G.I. Chain Link Fabric Fencing Of Required Width In Mesh Size 50X50 Mm Including Strengthening With 2 Mm Dia Wire Or Nuts, Bolts And Washers As Required Complete As Per The Direction Of Engineer-In-Charge. I ) Made Of G.I. Wire Of Dia 4 Mm. Iron Post / Structural Post Will Be Provided At 3 Mtr From Each Other And Shall Be Embeded Under Brickwork As Per Eic. 20 Providing And Fixing Concertina Coil Fencing With Punched Tape Concertina Coil 600 Mm Dia 10 Metre Openable Length ( Total Length 90 M ) , Having 50 Nos Rounds Per 6 Metre Length, Upto 3 M Height Of Wall With Existing Angle Iron Y Shaped Placed 2.4M Or 3.00 M Apart And With 9 Horizontal R.B.T. Reinforced Barbed Wire, Stud Tied With G.I. Staples And G.I. Clips To Retain Horizontal, Including Necessary Bolts Or G.I. Barbed Wire Tied To Angle Iron, All Complete As Per Direction Of Engineer-In-Charge, With Reinforced Barbed Tape ( R.B.T. ) / Spring Core ( 2.5Mm Thick ) Wire Of High Tensile Strength Of 165 Kg / Sq.Mm With Tape ( 0.52 Mm Thick ) And Weight 43.478 Gm / Metre ( Cost Of M.S. Angle, C.C. Blocks Shall Be Paid Separately ) 21 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : With Float Glass Panes Of 5 Mm Thickness ( Weight Not Less Than 12.50 Kg / Sqm ) 22 Epoxy, Expension Joint Tape And Aluminium Foil With All T&P And Shuttering Included And Special Treatment To Fix The Expansion Joint In Old Silo Building. All The Shuttering, Scaffolding Or Any Arrangement Required For Successful Completion Of Work Shall Be In Contractors Scope. Leak Test Shall Be Carried Out At Contractors Cost After Completion Of Work. 23 Providing And Fixing 25 Mm Diachlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including Allcpvc Plain & Brass Threaded Fittings, I / C Fixing The Pipe With Clampsat 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With Onestep Cpvc Solvent Cement And The Cost Of Cutting Chases And Makinggood The Same Including Testing Of Joints Complete As Per Directionof Engineer In Charge.Concealed Work, Including Cutting Chases And Making Good The Wallsetc. 24 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More 25 Electrical Work 26 Supply, Installation, Testing And Commissioningofwall Mounted2x18w Led Lighting Fixtures Includingproviding Light Plugpointcontrolledby1-6Ampere Modulartype Switchinclusive Ofthecostforproviding Circuitwiringfromdistribution Boardto Switch Boardswith2x2.5Sq.Mm.Including Handling, Transportation From Ownersstore To Erectionsite, Unpacking, Inspection; Checking Of Internalwiring;Erection In Positionon Falseceiling / Floor Etc , Cableglanding, Crimpingoflugs Andconnectionsatfixtures; Supply Ofallerection Materialsincluding Necessary Gihardware, Giclamps, Gibrackets, Civilmasonry Materials; Allwork, Labour And Materials Completeas Per Drawings, Specifications, Codesand Standardsand Directions Of Engineer In Charge. 27 Supply Of Industrial Type Pedestralfan 28 Supplyand Providingpoint Wiring System For6a Plugpoints Withsinglecore Multi Stranded Pvcinsulated Unsheathed Copperconductor Fire Retardantwiresof 1100V Grade Inrecessed Pvcconduit Includingprovidingandfixing Pvcconduits Ofrequired Size Completewithaccessoriessuchas Bends, Jb, Pull Boxesetc. Withplate, Switches, Sockets, Screws Andcovers, Zinc Passivated Ms Modularboxes ( 16Guage Sheet Construction ) Of Suitable Sizes, Embedded In Wall, Conceled Andflushwith Wallsincluding Cuttingandrefillingthechases / Walletcandinclusiveof14swg Bare Copper Earth Conductorforsocketoutlets Asperspecifications &Direction Ofengineer Incharge.All Modulartypeswitch & Socket Shall Beof Approved Make. 6A, 6 Pin Socket Outlet With 6A Switchmounted Sidebysidewith2x2.5 Sq.Mmpvc Copper Wirewith14swgbare Copperearthwire. ( Actual Nos.Shall Bedecided At Site ) . Including Supply & Installation Of Room Lightingswitch Board. 29 Supply Andproviding Pointwiringsystemfor 6 / 16Apowerplugpoint With Followingsizes Pvcinsulated Unsheathed Single Core Multistrandedcopper Conductor, Fireretardant Wiresof 1100V Gradein Recessedpvc Conduits Of Requiredsize Completewith Accessories Such Asbends, Jb, Pullboxes Etc.With Plateswitches, Sockets, Screws And Covers, Zinc Passivated Ms Modularboxes ( 16 Guage Sheet Construction ) Of Suitable Size, Embeddedin Wall Conceledand Flush With Wallsincludingcutting And Refilling The Chases / Wall Etc., Andinclusive Of 14 Swg Barecopperearthconductor For Socket Outlets Asperspecifications & Directionof Enginner In Charge. Allmodulartypeswitch & Socket Shall Be Of Approved Make. 16A, 6 Pinsocket Outlet With 16Aswitch Mountedside By Side With 2X4sq. Mm Pvc Copperwire With 14 Swg Barecopperearth Wire Asan Independent Circuitfromdb. ( Actualnos.Shall Bedecided Atsite ) .Including Supply & Installationof Room Lightingswitch Boardasmentioned In Inventoryattached 30 Supply Andproviding Pointwiringsystem For 32Aindustrial Socket Point ( A.C. Point ) With 2X4 Sq.Mm Pvcinsulated Copper Conductor Frls Cable Inrecessedpvcconduit Alongwith 1X4sq. Mm.Pvcinsulated Frls Cablefor Earthingi / C, Providing & Fixing32a Plug& Socket Unit Complete With 32Adp Mcb And32aplugtop Including Giboxto Be Mounted Onmodular Plate Completewithconnections, Testing &Commissioningetc. ( Seprate Circuit For Eachpoint ) 31 Supply, Installation, Testing&Commissioningoffollowing 300Mm Sweep Exhaust Fanwith Guards / Louvres, Alongwith Necessary Brackets, All Requiredcivilworks, Making Goodthe Wallsafter Fixingthe Fansetc. 32 Supply Of 6Ft Pvc Conduit 25Mm 33 Supply Andinstallation Of Gi Earth Strip 50X6mm Sizein Readymadeconcrete Trenches Or In Floor Slits, On Brick / Concrete Wall Underconcrete Floors, Or Paved Areas, Across Pipe Joints Andvalves, Directlyburiedundergroundatdepthof500mm, Including Handling, Transportationto Erectionsite, Bending, Straightening, Cuttingto Size, Welding Togetherof Earthstripsinoverlapping Manner, Chipping Inconcrete Floors / Paved Areas For Laying Theearth Strips Under Floors / Pavedareasand Makinggood Bycement Plastering Concrete Afterlaying Ofthestrips;Clamping Andsupportingofearthstrips Laidabove Ground, Connecting Thestrips / Wireatbothends To Equipment Orto Earthbus / Earth Platesor To Gibrackets Fixedinsideearthpitchamber, Byboltingetc., Hessian Tapes, All Necessary Gihardware, Giclamps, Civilmasonry Materials, Etc. Allwork, Labourasper Specifications, Codesand Standardsand Directionsofowner / Consultant.Ofhot Dip Galvanized Giearthstrips . 34 Supply Of 1.1Kv Grade, Xlpe Insulated, Pvcinnersheathed, Armoured, Frls Pvc Outer Sheathed 3.5X50 Sq Mm Xlpe Al Cable 35 Layingand Termination Of3.5X50 Sq Mm, 1.1Kv Grade, Xlpe Insulated, Pvcinnersheathed, Armoured, Frls Pvc Outer Sheathed Cables Including Its Terminationin New& Readymade Trenches, Onpre-Fabricated / Site-Fabricatedcabletrays / Racks, On Already Installed Risers, Support, Hangers, Saddles / Directlyburriedup To 700Mm Depth Etc. Pullingthroughpipeson Walls / Columns, Steel Structures Including Transportation Of Cabledrums From Storageyardto Site, Unrollingthe Drum, Including Supply & Fixingof Cabletags, Alclamps With Alllabour, Consumablematerials Andnecessaryhardware To Makeinstallation Complete In All Respect Asper Directionof Engineer-In-Charge 36 Supply Of 250W Led Flood Lights 37 Supply Of 1.1Kv Grade, Xlpe Insulated, Pvcinnersheathed, Armoured, Frls Pvc Outer Sheathed 4Cx2.5 Sq Mm Cu Cable In New& Readymade Trenches, Onpre-Fabricated / Site-Fabricatedcabletrays / Racks, On Already Installed Risers, Support, Hangers, Saddles / Directlyburriedup To 700Mm Depth Etc. Pullingthroughpipeson Walls / Columns, Steel Structures Including Transportation Of Cabledrums From Storageyardto Site, Unrollingthe Drum, Including Supply & Fixingof Cabletags, Alclamps With Alllabour, Consumablematerials Andnecessaryhardware To Makeinstallation Complete In All Respect Asper Directionof Engineer-In-Charge 38 Layingand Termination Of 4Cx2.5 Sq Mm Armoured Cu Cable 1.1Kv Grade, Xlpe Insulated, Pvcinnersheathed, Armoured, Frls Pvc Outer Sheathed Cables Including Its Terminationin New& Readymade Trenches, Onpre-Fabricated / Site-Fabricatedcabletrays / Racks, On Already Installed Risers, Support, Hangers, Saddles / Directlyburriedup To 700Mm Depth Etc. Pullingthroughpipeson Walls / Columns, Steel Structures Including Transportation Of Cabledrums From Storageyardto Site, Unrollingthe Drum, Including Supply & Fixingof Cabletags, Alclamps With Alllabour, Consumablematerials Andnecessaryhardware To Makeinstallation Complete In All Respect Asper Directionof Engineer-In-Charge 39 Supply, Unloading, Handling, Storage, Transporation Withinsite, Erection Of 415V Hose Proofandweatherproofindustrial Typesheet Steelenclosed, 18Waysingle Phase Socket Db ( Spdb ) With Ip-55 Degree Of Protectionhaving 1 No. 63Atpn Mccb, 3 Nos.63Adp Mcb In Phase And18 Nos.16Adp Mcbs Outgoing Asindicated In Attached Sld Alongwith Technical Specifications, Standards Etc. 40 Excavation Of 333 Mtr Length Of400 / 600 Mm Wide X 750 Mm Deep A For Laying Of Cables Including Disposal Of Excavated Earth, Lead Up To 100 Mtrs. And Lift Up To 1.5 Mtrs., Disposed Earth To Be Levelled And Neatly Dressed. After Laying Of Cable Backfillingwithexcavatedearthintrenchincludingconsolidatingeachdepositedlayerby Ramming, Dressing Etc. 41 Supplyandlayingofapprovedquality75mmthicksecondclassbrickflatsolingwithsandfillinginthe Interstices, Incabletrenchesforprotectionincludingthecostofallbrickandsand, Labour, Loadandlift Charges , Tools And Tackles Etc , Asper Drawings, Specification And Directionsofsite Engineer / Engineer-In Charge. 42 Supplying And Spreading Of Approved Quality Fine Dry River Sand In Cable Trenches Including The Costof All Material, Transport, Loadandliftcharges, Labour, Toolsandtackles, Consumablesetc, As Perdrawings, Specification And Directionsofsite Engineer / Engineer-In-Charge 43 Supply And Installation Of1.5 T Split Ac 44 Supply, Unloading, Storage, Handling, Transporationwithinsitefromstoretositeofinstallation, Erection, Including Civil Foundation And Pile Design As Required ( Except Cast Of Piling At Site ) , Installationand Testing Of 30M High Mast Shaft In Three Sections Suitable For Wind Speed As Per Is-875, With Raising Lowering System Comprising, Head Frame, Luminaries Carriage Suitable To Install24 Nos Luminaries Of Benp-20Fl-350W Led Of Bajaj Make Or Equivalent In Symmetrical Arrangement, Double Drum Winch, 6Mm Diameter Ss Wire Rope, Trailing Cable, Connector, Integral Power Tool Motor, Manual Handle, Junction Box, Lightening Finial, Including 1 Set Foundation Bolts Manufactured From Special Steel Along With Nuts, Washers, Anchor Plates And Templates. This Includes Supply And Installation Of24 Nos. Integral Led Flood Light Luminaire Withcomplete Set Of Lamp&Driversaspertechnicalspecificationthefollowingcomponents: Aluminumcastluminarybody, Electroniccircuit&Leddrivers, Weatherprooftransparentcover, Luminarymountingclamps, Led Assembly.1 Set Within Luminary Interconnection.Supply And Installation Of 2 Nos. Led Type Single Dome Aviation Obstruction Lightis Also Required With One High Mast. This Also Includes Supply And Installation Of 1 No. Outdoor Stand Mounted Feeder Pillar With63a, 4-Pole Mccb Incomer, Single Dial Time Switch, 45A Tp Contactorfortheautomaticswitchingofluminaries, Powertoolcontrolwith2no9acontactorsandraise Lowerpushbutton, Incomingandoutgoing Terminalssuitableforrequiredcablesize ( Cablesizeshallbe Indicated During Detail Engg ) . The Control Panel Shall Be Of Weather Proof .Construction Of Shallow Foundation With M25 Grade Concrete For The Highmast Considering The Safe Soil Bearing Capacity At Site As 10 T / Sqmtr At 2 Metre Depth With All Materials And Labour. Lightning Finial Shall Be Insulated From Body And Head Frame Of High Mast And A Separate Down Conductor ( 1Rx1cx35 Sq Mm Aluminium Flexible Cable ) Shall Run From The Lightning Finial To An Earthing Bolt Independent Of The High Mast Structure. Electrical Accessories Like Plug & Socket, Power Tool Motor Etc At The Bottom Of High Mast Shall Be Weather Proof. 45 Supply Of 1.1Kv Grade, Xlpeinsulated, Pvcinnersheathed, Armoured, Frls Pvc Outer Sheathed 3.5Cx70 Sq M Al Cable In New& Readymade Trenches, Onpre-Fabricated / Site-Fabricatedcabletrays / Racks, On Already Installed Risers, Support, Hangers, Saddles / Directlyburriedup To 700Mm Depth Etc. Pullingthroughpipeson Walls / Columns, Steel Structures Including Transportation Of Cabledrums From Storageyardto Site, Unrollingthe Drum, Including Supply & Fixingof Cabletags, Alclamps With Alllabour, Consumablematerials Andnecessaryhardware To Makeinstallation Complete In All Respect Asper Directionof Engineer-In-Charge 46 Layingand Termination Of 3.5Cx70 Sq Mm Armoured Al Cable 1.1Kv Grade, Xlpe Insulated, Pvcinnersheathed, Armoured, Frls Pvc Outer Sheathed Cables Including Its Terminationin New& Readymade Trenches, Onpre-Fabricated / Site-Fabricatedcabletrays / Racks, On Already Installed Risers, Support, Hangers, Saddles / Directlyburriedup To 700Mm Depth Etc. Pullingthroughpipeson Walls / Columns, Steel Structures Including Transportation Of Cabledrums From Storageyardto Site, Unrollingthe Drum, Including Supply & Fixingof Cabletags, Alclamps With Alllabour, Consumablematerials Andnecessaryhardware To Makeinstallation Complete In All Respect Asper Directionof Engineer-In-Charge 47 Supply And Installation Of415v, 4 Way Db For Toyo Yard Room 48 Misc / Contingency Charges

Refer document

INR 241000.0 /-

Refer document

Name of Work: Renovation of Old Silo, Toyo occupied open yard and Lubricant storage yard.

Sl. No.	Item Description
1	Civil Work
2	Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. i) All kinds of soil
3	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed by EIC All kinds of soil.
4	Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
5	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
6	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
7	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
8	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
9	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
10	Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
11	White washing with lime to give an even shade : New work (three or more coats)
12	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
13	CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
14	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer
15	Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
16	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
17	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
18	Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials ouside plant premises or as per EIC instruction, stacking serviceable and unserviceable material separately including cutting reinforcement bars inside plant. Cutting of RCC shall be done by diamond cutter/grinder/any other means with proper cutting and finishing including shuttering at height,scaffolding or any necessary arrangement required for successful completion of work at height.
19	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. i) Made of G.I. wire of dia 4 mm. Iron post/structural post will be provided at 3 Mtr from each other and shall be embeded under Brickwork as per EIC.
20	Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron "Y" shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
21	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
22	Epoxy, Expension Joint Tape and Aluminium foil with all T&P and shuttering included and special treatment to fix the expansion joint in Old Silo building. All the shuttering,scaffolding or any arrangement required for successful completion of work shall be in contractors scope. Leak test shall be carried out at contractors cost after completion of work.
23	Providing and fixing 25 mm diaChlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
24	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
25	Electrical Work
26	Supply,Installation, Testing and Commissioningofwall mounted2X18W LED lighting fixtures includingproviding light plugpointcontrolledby1-6Ampere modulartype switchinclusive ofthecostforproviding circuitwiringfromDistribution boardto switch boardswith2x2.5sq.mm.Including handling,transportation from ownersstore to erectionsite, unpacking, inspection; checking of internalwiring;Erection in positionon falseceiling/ floor etc , cableglanding, crimpingoflugs andconnectionsatfixtures; supply ofallerection materialsIncluding necessary GIhardware, GIclamps, GIbrackets, civilmasonry materials; allwork,labour and materials completeas per drawings,specifications,codesand standardsand directions of Engineer in charge.
27	Supply of industrial type Pedestralfan
28	Supplyand ProvidingPoint Wiring system for6A Plugpoints withsinglecore multi stranded PVCinsulated unsheathed copperconductor fire retardantwiresof 1100V grade inrecessed PVCconduit includingprovidingandfixing PVCconduits ofrequired size completewithaccessoriessuchas bends,JB,Pull Boxesetc. withplate, switches, sockets, screws andcovers, Zinc Passivated MS modularboxes (16guage sheet construction)of suitable sizes,embedded in wall,conceled andflushwith wallsincluding cuttingandrefillingthechases/Walletcandinclusiveof14SWG bare copper earth conductorforsocketoutlets asperspecifications &direction ofEngineer incharge.All Modulartypeswitch & socket shall beof approved make. 6A,6 pin socket outlet with 6A switchmounted sidebysidewith2x2.5 sq.mmPVC copper wirewith14SWGbare copperearthwire.(Actual nos.shall bedecided at site). Including supply & installation of room lightingswitch board.
29	Supply andProviding PointWiringsystemfor 6/16Apowerplugpoint with followingsizes PVCinsulated unsheathed single core multistrandedcopper conductor,fireretardant wiresof 1100V gradein recessedPVC conduits of requiredsize completewith accessories such asbends, JB, Pullboxes etc.with plateswitches, sockets, screws and covers, Zinc Passivated MS modularboxes (16 guage sheet construction) of suitable size, embeddedin wall conceledand flush with wallsincludingcutting and refilling the chases/Wall etc.,andinclusive of 14 SWG barecopperearthconductor for socket outlets asperspecifications & directionof Enginner in charge. Allmodulartypeswitch & socket shall be of approved make. 16A,6 Pinsocket outlet with 16Aswitch mountedside by side with 2x4sq. mm PVC copperwire with 14 SWG barecopperearth wire asan independent circuitfromDB. (Actualnos.shall bedecided atsite).Including supply & installationof room lightingswitch boardasmentioned in inventoryattached
30	Supply andProviding PointWiringsystem for 32AIndustrial socket point (A.C. Point)with 2x4 sq.mm PVCinsulated copper conductor FRLS cable inrecessedPVCconduit alongwith 1x4sq. mm.PVCinsulated FRLS cablefor earthingI/C,Providing & fixing32A plug& socket unit complete with 32ADP MCB and32Aplugtop including GIBoxto be mounted onmodular plate completewithconnections,testing &commissioningetc. (seprate circuit for eachpoint)
31	Supply,Installation, Testing&Commissioningoffollowing 300mm sweep Exhaust fanwith guards /louvres, alongwith necessary brackets, all requiredcivilworks, making goodthe wallsafter fixingthe fansetc.
32	Supply of 6ft PVC conduit 25mm
33	Supply andInstallation of GI earth strip 50X6mm sizein readymadeconcrete trenches or in floor slits, on brick/ concrete wall underconcrete floors,or paved areas, across pipe joints andvalves, directlyburiedundergroundatdepthof500mm,including handling, transportationto erectionsite,bending, straightening,cuttingto size, welding togetherof earthstripsinoverlapping manner, chipping inconcrete floors/paved areas for laying theearth strips under floors / pavedareasand makinggood bycement plastering concrete afterlaying ofthestrips;clamping andsupportingofearthstrips laidabove ground, connecting thestrips/wireatbothends to equipment orto earthbus /earth platesor to GIbrackets fixedinsideearthpitchamber, byboltingetc.,Hessian tapes, all necessary GIhardware, GIclamps, civilmasonry materials, etc. allwork, labourasper specifications,codesand standardsand directionsofowner / consultant.ofHot Dip Galvanized GIearthstrips .
34	Supply of 1.1KV Grade, XLPE Insulated, PVCinnersheathed, armoured, FRLS PVC outer sheathed 3.5X50 sq mm XLPE Al cable
35	Layingand termination of3.5X50 sq mm, 1.1KV Grade, XLPE Insulated, PVCinnersheathed, armoured, FRLS PVC outer sheathed cables including its terminationin new& readymade trenches, onpre-fabricated/ site-fabricatedcabletrays/ racks, on already installed risers, support, hangers,saddles/ directlyburriedup to 700mm depth etc. pullingthroughpipeson walls/columns, steel structures including transportation of cabledrums from storageyardto site, unrollingthe drum,including supply & fixingof cabletags, Alclamps with alllabour,consumablematerials andnecessaryhardware to makeinstallation complete in all respect asper directionof engineer-in-charge
36	Supply of 250W LED flood lights
37	Supply of 1.1KV Grade, XLPE Insulated, PVCinnersheathed, armoured, FRLS PVC outer sheathed 4CX2.5 sq mm Cu cable in new& readymade trenches, onpre-fabricated/ site-fabricatedcabletrays/ racks, on already installed risers, support, hangers,saddles/ directlyburriedup to 700mm depth etc. pullingthroughpipeson walls/columns, steel structures including transportation of cabledrums from storageyardto site, unrollingthe drum,including supply & fixingof cabletags, Alclamps with alllabour,consumablematerials andnecessaryhardware to makeinstallation complete in all respect asper directionof engineer-in-charge
38	Layingand termination of 4CX2.5 sq mm armoured cu cable 1.1KV Grade, XLPE Insulated, PVCinnersheathed, armoured, FRLS PVC outer sheathed cables including its terminationin new& readymade trenches, onpre-fabricated/ site-fabricatedcabletrays/ racks, on already installed risers, support, hangers,saddles/ directlyburriedup to 700mm depth etc. pullingthroughpipeson walls/columns, steel structures including transportation of cabledrums from storageyardto site, unrollingthe drum,including supply & fixingof cabletags, Alclamps with alllabour,consumablematerials andnecessaryhardware to makeinstallation complete in all respect asper directionof engineer-in-charge
39	Supply,unloading,Handling,Storage,transporation withinsite,Erection of 415V Hose proofandweatherproofindustrial typesheet steelenclosed, 18waySingle Phase socket DB(SPDB) with IP-55 degree of protectionhaving 1 no. 63ATPN MCCB, 3 nos.63ADP MCB in phase and18 nos.16ADP MCBs outgoing asindicated in attached SLD alongwith technical specifications, standards etc.
40	Excavation of 333 mtr length of400/600 mm wide x 750 mm deep a for laying of cables including disposal of excavated earth, lead up to 100 mtrs. and lift up to 1.5 mtrs., disposed earth to be levelled and neatly dressed. After laying of cable Backfillingwithexcavatedearthintrenchincludingconsolidatingeachdepositedlayerby ramming, dressing etc.
41	Supplyandlayingofapprovedquality75mmthicksecondclassbrickflatsolingwithsandfillinginthe interstices,incabletrenchesforprotectionincludingthecostofallbrickandsand,labour,loadandlift charges , tools and tackles etc , asper drawings, specification and directionsofSite Engineer / Engineer-in Charge.
42	Supplying and spreading of approved quality fine dry river sand in cable trenches including the costof all material,transport,loadandliftcharges,labour,toolsandtackles,consumablesetc,as perdrawings, specification and directionsofSite Engineer / Engineer-in-Charge
43	Supply and installation of1.5 T split AC
44	Supply,unloading,storage,handling,transporationwithinsitefromstoretositeofinstallation,erection, including civil foundation and pile design as required (except cast of piling at site),installationand testing of 30M high mast shaft in three sections suitable for wind speed as Per IS-875, with raising lowering system comprising, head frame, luminaries carriage suitable to install24 nos luminaries of BENP-20FL-350W LED of Bajaj Make or Equivalent in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial, including 1 set foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. This includes Supply and installation of24 nos. Integral LED Flood Light Luminaire withcomplete set of lamp&driversaspertechnicalspecificationthefollowingcomponents: AluminumCastluminarybody, ElectronicCircuit&LEDdrivers, WeatherproofTransparentCover,LuminaryMountingClamps,LED Assembly.1 set Within Luminary Interconnection.Supply and installation of 2 nos. LED type single dome aviation obstruction lightis also required with one high mast. This also includes Supply and installation of 1 no. outdoor stand mounted feeder pillar with63A, 4-pole MCCB incomer,single dial time switch,45A TP contactorfortheautomaticswitchingofluminaries,powertoolcontrolwith2no9Acontactorsandraise lowerpushbutton,Incomingandoutgoing terminalssuitableforrequiredcablesize(cablesizeshallbe indicated during detail engg). The Control Panel shall be of weather proof .Construction of shallow foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour. Lightning Finial shall be insulated from body and head frame of High Mast and a separate down conductor (1Rx1Cx35 sq mm Aluminium Flexible Cable) shall run from the lightning finial to an earthing bolt independent of the high Mast structure. Electrical accessories like plug & socket, power tool motor etc at the bottom of high mast shall be weather proof.
45	Supply of 1.1KV Grade, XLPE Insulated, PVCinnersheathed, armoured, FRLS PVC outer sheathed 3.5CX70 sq m Al cable in new& readymade trenches, onpre-fabricated/ site-fabricatedcabletrays/ racks, on already installed risers, support, hangers,saddles/ directlyburriedup to 700mm depth etc. pullingthroughpipeson walls/columns, steel structures including transportation of cabledrums from storageyardto site, unrollingthe drum,including supply & fixingof cabletags, Alclamps with alllabour,consumablematerials andnecessaryhardware to makeinstallation complete in all respect asper directionof engineer-in-charge
46	Layingand termination of 3.5CX70 sq mm armoured Al cable 1.1KV Grade, XLPE Insulated, PVCinnersheathed, armoured, FRLS PVC outer sheathed cables including its terminationin new& readymade trenches, onpre-fabricated/ site-fabricatedcabletrays/ racks, on already installed risers, support, hangers,saddles/ directlyburriedup to 700mm depth etc. pullingthroughpipeson walls/columns, steel structures including transportation of cabledrums from storageyardto site, unrollingthe drum,including supply & fixingof cabletags, Alclamps with alllabour,consumablematerials andnecessaryhardware to makeinstallation complete in all respect asper directionof engineer-in-charge
47	supply and installation of415V,4 way DB for toyo yard room
48	Misc/Contingency charges