Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.. All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 3 | Extrafor every additional lift of 1.5 m or part thereof.in all kind of soil. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources: 4 graded stone aggregate 20mm nominal size derived from natural sources). |
| 6 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20mmnominalsize derivedfromnatural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling&dressing & finishing the top smooth. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 14 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections |
| 15 | Providingandlayinginpositionmachinebatchedand machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using coarse aggregate as wellasfineaggregatederivedfromnaturalsourcesand cement content as per approved design mix, includingpumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103toaccelerate,retardsetting of concrete,improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note:- Cement content considered in this item is @ 330 kg/cum.\"Excess/lesscementusedasper designmixispayable/recoverable separately). All works upto plinth level |
| 16 | Providingandlayinginpositionmachinebatchedand machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using coarse aggregate as wellasfineaggregatederivedfromnaturalsourcesand cement content as per approved design mix, includingpumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103toaccelerate,retardsetting of concrete,improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note:- Cement content considered in this item is @ 330 kg/cum.\"Excess/lesscementusedasper designmixispayable/recoverable separately). All works above plinth level upto floor V level |
| 17 | Add for using extra cement in the items of design mix over and above the specified cement content therein. |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 20 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 21 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 23 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 24 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm |
| 25 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 26 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B, Fixing with adjustable lugs with split end tail to each jamb |
| 27 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 28 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 29 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 30 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes |
| 31 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 32 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 33 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 34 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 Degree 110 mm bend |
| 35 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe |
| 36 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 37 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams |
| 38 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 39 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 40 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 41 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) |
| 42 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. |
| 43 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 44 | Neat cement punning. |
| 45 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 46 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 47 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 48 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 49 | Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). |
| 50 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. (RCC cover for tank MH1(1000X1000 sqm) |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal dia Pipes |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia Pipes |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 80 mm nominal dia Pipes |
| 57 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore |
| 58 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 59 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore |
| 60 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 61 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore |
| 62 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 63 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore |
| 64 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore , Horizental |
| 65 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 20 mm nominal bore |
| 66 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 67 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter |
| 68 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter |
| 69 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 300 mm diameter |
| 70 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe |
| 71 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe |
| 72 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe |
| 73 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 74 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 75 | Extra for depth for manholes :Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 76 | Extra for depth for manholes : Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 77 | Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 78 | Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 79 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture\"s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 80 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality EHD - 35Circular shape 560 mm internal dia |
| 81 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 82 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 83 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge |
| 84 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group A |
| 85 | Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required |
| 86 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 87 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 88 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). |
| 89 | Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required |
| 90 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 91 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. |
| 92 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required 32 Amp TP&N |
| 93 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required 63 Amp TP&N |
| 94 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required 100 Amp TP&N |
| 95 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required 200 Amp TP&N |
| 96 | Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 Amp, 16 KA |
| 97 | Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 200 Amp, 25 KA |
| 98 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8way,Single door |
| 99 | Supplying, installing, testing and commissioning of following capacity TPN distribution tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with HRC fuses, interconnections, earthing etc. as required. 63 amps TPN, 6 way |
| 100 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 101 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 102 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 103 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming toIS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc , complete as required.upto 160Sq mm |
| 104 | Supplying and laying of following sizeDWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming toIS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.up 120 Sqmm |
| 105 | Supplying, of one number PVC insulated and PVC sheathed / XLPE Armoured cable of 11 KV grade of following size as required. 120 Sq mm |
| 106 | Supplying of one number PVC insulated and PVC sheathed / XLPE Armoured cable of 11 KV grade of following size as required. 3.50 Core x 70 Sq mm |
| 107 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 3.50 Core x 120 sq. mm |
| 108 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 Sqm and upto 400 Sqmm |
| 109 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 110 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 X 120 Sqmm (45 mm) |
| 111 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 X 70 Sqmm (45 mm) |
| 112 | Supplying, installing, testing and commimmissioning of 20 HP Submersible Pump for water lifting in STP to water storage tank Kirloskar make with IP 44 protection with level controller and delivery headers complete in all respect. Treated water pump head 50 Mtrs complete etc. as required with sufficient flow. Make of Kirloskar/ CRI/ KSB/ Wilo/Crompton. |
| 113 | Supply of 1400mm Ceiling fan Havells/ Bajaj/ Philips/Cropmton/USHA ISI Make with 400 RPM. |
| 114 | Design, Engineering, supplying, installation, testingand commissioning of 04 no. Anaerobic Sewage Treatment Plant (STP Make: Organic Solutions/environment Technologies & Systems/Ecologic Waste Solutions) based on microbial additive based anaerobic STP followed by Advance Eco Reactor (AER) with total effluent handling capacity of 275 KL, 175 KL & 25 KL per day with concurrance of IIT/NIT. |
| 115 | Associated civil works (under civil contractor\"s scope) :-1. Detailed STP drawings (Architectural drawing, Structural drawing, Plan, Sections elevations and other related working drawingsfrom approved Govt institute (NIT, IIT) indicating the sizes shall be submitted to engineer-in-charge prior to procure/erection.2. Construction of Eq tank & Fermentative Reactor as per drawings submitted by the technology provider.3. Construction of Advance Eco Reactor (AER) as per drawings submitted by technology provider.4. Construction of Tertiary Treatment Stage & Treated water tank as per drawings submitted by technology provider5. Construction of Bar Screen Chamber as per drawngs submitted by the technology provider6. Construction of grease traps for all Mess/Kitchens as per drawings submitted the technology provider7. Provision of River Gravels as per size suggested by the technology provider.8. All kinds of associated civil works |
| 116 | Design Features:1. The plant should be able to operate efficiently at 10% of design flow and should be suitable for low/peak flow.2. The STP should be able to operate in continous, batch or intermittent mode as required.3. There should be no daily/weekly/monthly sludge handling.4. The plant should not create any droninig noise5. STP to be operated in auto mode with supervision by operator once-twice daily.6. The plant should work without the use of any mechanical aeration of any type.7. The plant should be eco friendly.8. Water recovery rate should be 90% of the sewage.9. No chemicals should be used in the process except chlorination for disinfection10. STP Make: Organic Solutions/Environment Technologies & Systems/Ecologic Waste Solutions |
| 117 | Supply, installation, testing & commissiong of SS Screen with SS Frame with suitable cleaning arrangement to block the in organics like bottles, glass, polythenes etc. Type: Bar Screen with 8mm to 12mm openingMake: SS 304 Fabricated |
| 118 | Supply, installation, testing & commissioning of submersible type Sewage Transfer Pumps with solid handling of 20MM incorporating C.I. pump body, CI impeller, CI motor body with level controller.Discharge: 1250 Lit/hr to 8750 Lit/hr (each) at 10 Meter head. Motor capacity: 1.0 HP 4 Nos Pump - [2 Working + 2 SB] complete etc. as reqd. (Pump Make : Wilo/Kirloskar/CRI/Leo) |
| 119 | Supply, installation, testing & commissioning of submersible type Sewage Transfer Pumps with solid handling of 20MM incorporating C.I. pump body, CI impeller, CI motor body with level controller.Discharge: 13750 Lit/hr (each) at 10 Meter head. Motor capacity: 2.0 HP2 Nos Pump - [1 Working + 1 SB] complete etc. as reqd. (Pump Make : Wilo/Kirloskar/CRI/Leo) |
| 120 | Supply, installation, testing & commissioning of submersible type AER I feed Pumps with solid handling of 20mm incorporating C.I. casing, CI impeller, CI motor body with level controller. Discharge: 1250 Lit/hr (each) at 14 Meter head; Motor Capacity: 1.0 HP 2 Nos Pump - [1 Working + 1 SB] complete etc. as reqd. (make: Wilo/Kirloskar/CRI/Leo) |
| 121 | Supply, installation, testing & commissioning of submersible type AER I feed Pumps with solid handling of 20mm incorporating C.I. casing, CI impeller, CI motor body with level controller. Discharge: 13750 Lit/hr (each) at 14 Meter head; Motor Capacity: 3.0 HP2 Nos Pump - [1 Working + 1 SB] complete etc. as reqd. (make: Wilo/Kirloskar/CRI/Leo) |
| 122 | Supply, installation, testing & commissioning of submersible type AER I feed Pumps with solid handling of 20mm incorporating C.I. casing, CI impeller, CI motor body with level controller. Discharge: 8750 Lit/hr (each) at 14 Meter head; Motor Capacity: 2.0 HP 2 Nos Pump - [1 Working + 1 SB] complete etc. as reqd. (make: Wilo/Kirloskar/CRI/Leo) |
| 123 | Supply, installation, testing & commissioning of submersible type AER 2 feed Pumps (solid handling not required) incorporating C.I. casing, CI impeller, CI motor body with level controller. Discharge: 1250 Lit/hr to 8750 Lit/hr (each) at 14 Meter head; Motor Capacity: 1.0 HP 4 Nos Pump - [2 Working + 2 SB] complete etc. as reqd. (make: Wilo/Kirloskar/CRI/Leo) |
| 124 | Supply, installation, testing & commissioning of submersible type AER 2 feed Pumps (solid handling not required) incorporating C.I. casing, CI impeller, CI motor body with level controller. Discharge: 13750 Lit/hr (each) at 14 Meter head; Motor Capacity: 1.5 HP 2 Nos Pump - [1 Working + 1 SB] complete etc. as reqd. (make: Wilo/Kirloskar/CRI/Leo) |
| 125 | Organic AER media inoculated with specially cultured vermiculture.Qty: 2100 Kgs (make: Organic Solutions/ETS Enviro/Ecologic) |
| 126 | Organic AER media inoculated with specially cultured vermiculture.Qty: 2800 Kgs (make: Organic Solutions/ETS Enviro/Ecologic) |
| 127 | AER Mix powder (500 gms each) infused with facultative microbial culture, enzymes and engineered light weight expanded substrate of suitable porosity and adsorption rate. (make: Organic Solutions/ETS Enviro/Ecologic) |
| 128 | Organic Substrate carrier having appropriate porosity of 40-60%, C:N ratio of 250-400:1 along with unloading & filling (No PVC material to be used) Qty: 35 Tons(make: locally available substrate material) |
| 129 | Organic Substrate carrier having appropriate porosity of 40-60%, C:N ratio of 250-400:1 along with unloading & filling (No PVC material to be used) Qty: 48 Tons (make: locally available substrate material) |
| 130 | Inert Media for TSS removal and adsorption. Qty: 70 cum |
| 131 | Inert Media for TSS removal and adsorption. Qty: 96 cum |
| 132 | Supply, installation, testing & commissioning of submersible type Filter feed pumps incorporating C.I. casing, CI impeller, CI motor body with level controller. Discharge: 1250 Lit/hr to 8750 Lit/hr (each) at 14 Meter head; Motor Capacity: 1.0 HP4 Nos Pump - [2 Working + 2 SB] complete etc. as reqd. (make: Wilo/Kirloskar/CRI/Leo) |
| 133 | Supply, installation, testing & commissioning of submersible type Filter feed pumps incorporating C.I. casing, CI impeller, CI motor body with level controller. Discharge: 13750 Lit/hr (each) at 14 Meter head; Motor Capacity: 1.5 HP2Nos Pump - [1 Working + 1 SB] complete etc. as reqd. (make: Wilo/Kirloskar/CRI/Leo) |
| 134 | Supply, installation, testing & commissioning of Vertical Flow mounted mild steel Epoxy pressure type Activated Carbon Filter (fabricated from MS sheet of IS 2062 grade material) provided with an inlet distributor. The external of vessel to be painted (internally with epoxy primer) and to be filled with the required quantities of filer media like carbon, gravels, silica sand etc.Flow rate = 13.75 M3 / hrHeight/Dia = 1800mm/1200mmShell / Dish thickness = 6mm/8mmWorking pressure = 3 Kg/Sq.cm.Max pressure = 5 Kg/Sq.cm.Type of Carbon = Coal based Granular Activated Carbon IV 800. Min Carbon Qty: 550 Kg(Make: MS IS 2062 grade material fabricated) |
| 135 | Supply, installation, testing & commissioning of Vertical Flow mounted mild steel Epoxy pressure type Activated Carbon Filter (fabricated from MS sheet of IS 2062 grade material) provided with an inlet distributor. The external of vessel to be painted (internally with epoxy primer) and to be filled with the required quantities of filer media like carbon, gravels, silica sand etc.Flow rate = 8.75 M3 / hrHeight/Dia = 1800mm/1000mmShell / Dish thickness = 6mm/8mmWorking pressure = 3 Kg/Sq.cm.Max pressure = 5 Kg/Sq.cm.Type of Carbon = Coal based Granular Activated Carbon IV 800. Min Carbon Qty: 875 Kg(Make: MS IS 2062 grade material fabricated) |
| 136 | Supply, installation, testing & commissioning of Vertical Flow mounted mild steel Epoxy pressure type Activated Carbon Filter (fabricated from MS sheet of IS 2062 grade material) provided with an inlet distributor. The external of vessel to be painted (internally with epoxy primer) and to be filled with the required quantities of filer media like carbon, gravels, silica sand etc.Flow rate = 1.25 M3 / hrHeight/Dia = 1200mm/600mmShell / Dish thickness = 6mm/8mmWorking pressure = 3 Kg/Sq.cm.Max pressure = 5 Kg/Sq.cm.Type of Carbon = Coal based Granular Activated Carbon IV 800. Min Carbon Qty: 120 Kg(Make: MS IS 2062 grade material fabricated) |
| 137 | Piping work for 02 nos. STP with all necessary accessories like B/F valves, Ball valves, suitable MS supports, Pressure gauges, MTA, Elbows, Unions, NRVs, reducer bush, FTA, clamps, GI nut bolts, rubber gaskets, couplers, suitable suction & delivery headers for pumps, couplers, foot valves, clamps, MS cable tray, fastners, cable ties, nipples, solvents, ball valves for bacteria preparation tanks, frontal & backwash piping for filter, air release piping for filter, multiport valves etc for making the STP & filtration system complete. (Pipe Make: Supreme/Prince/Astral; Type: CPVC; Fittings: ASTM standard |
| 138 | Piping work for 02 nos. STP with all necessary accessories like B/F valves, Ball valves, suitable MS supports, Pressure gauges, MTA, Elbows, Unions, NRVs, reducer bush, FTA, clamps, GI nut bolts, rubber gaskets, couplers, suitable suction & delivery headers for pumps, couplers, foot valves, clamps, MS cable tray, fastners, cable ties, nipples, solvents, ball valves for bacteria preparation tanks, frontal & backwash piping for filter, air release piping for filter, multiport valves etc for making the STP & filtration system complete. (Pipe Make: Supreme/Prince/Astral; Type: CPVC; Fittings: ASTM standard |
| 139 | Supply, installation, testing & commissioning of Electrical Distribution Control Panel. The panel shall be made of 2mm thick CRCA sheet duly powder coated. The panel shall have necessary switch gears such as 64 amp MCB with outgoing switch gears for auto operation of raw sewage pumps, AER feed pumps, filter feed pumps, chlorination system with necessary MCBs, VIF meter, indication light, protection MCB and DOL Starter with MCB over load relay, single phase preventor relay, on-off light push button, auto -manual selector switch, cyclic timer for auto change over of pumps, dry run protection etc,.(Construction of earthing pit, earthing from earthing pit to STP control panel, electrical connection from main line to STP panel & supply of treated water of pumps not under scope)Switchgears Make: L&T/Schneider/ABB/ Siemens /Equivalent |
| 140 | Unarmoured Copper control wiring for 02 no STPs of suitable size from STP panel in PVC channel/Conduit/MS pipe for submersible sewage pumps(Cable Make: Polycab/ L&T/ Havells) |
| 141 | Unarmoured Copper control wiring of suitable size from STP panel in PVC channel/Conduit/MS pipe for submersible sewage pumps(Cable Make: Polycab/ L&T/ Havells) |
| 142 | Supply, installation, testing & commissioning of Chlorine Dosing System consisting of 1 no. FRP/HDPE tank, 2 nos dosing pumps with a variable flow rate of 0-6 LPH, necessary polypropylene piping & injection fittings to make the system complete for dosing solution to the feed line.Pump Make: Edose/Acquanomic/Idose |
| 143 | Bacteria Activation & dosing PVC tanks fitted with temperature control system for bacteria preparation & dosing but without the base support for tank. (1000 litre capacity tanks) Make: Sintex Reno / Ganga / Sheetal |
| 144 | Bacteria Activation & dosing PVC tanks fitted with temperature control system for bacteria preparation & dosing but without the base support for tank. (300 litre capacity tanks) Make: Sintex Reno / Ganga / Sheetal |
| 145 | Providing of probiotic microorganisms mother culture at site along with micronutrients for activation of probitoic microorganisms. (Bacteria Make: OS1/ Envirosense /Ecolog)Manufacturer verified (signed & stamped) Material Safety Data Sheet (MSDS) of OS1/Envirosense/Ecolog microorganisms issued for this work to be provided at the start of work and upto 12 Month maintenence period. |
| 146 | Maintenance work for all 04 STP only providing 02 technicians / Operators having good knowledge of running STP all days including Sunday and other holidayof the month per 08 Hrs shift minimum. Each will Operate STP in 21st Bn Panthchowk and Zewan Camps. If any other material required for same will be provided free of cost by contractor. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
