|
| 1 | S/I/T/C of 300KW capacity Electrically oprated Hot Water Genrator with Power & Control Panel,buolt in safety interlock features & desired. the Heater unit shall be of resistance immersion type house in chromo plated copper tubesincluding RCC/PCC Foundation for new Hot Water Genrator. Complete in all respects make: Rapid cool/ KEPL |
| 2 | S/I/T/C of 15300 CMHfactory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels cinsisting of preplasticized GI casing of thikness 0.8mm outside layer & 0.8mm inside layer with polyurethane foam(PUF) insulated factory injected between then by injected moulding M/c, complete with blower section withblower suitable for static pressure as required, minimum 2 bend GSS/PVCeliminators, cooling coil section with Al. finned copper tubes(tubes thickness not less than 0.5mm)coolingcoil of 4 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive packeage with TEFC driveMotor of efficiency class IE3 suitable for 415+ 10% olts, 50Hz, 3phase ACSupply suitably designed for variable frequicy drive applications, drain connections, stainless steel(18G) drain pan with PUF insulation,150mm dia dial type pressure gauges(02Nos) & industrial type thermometers(02Nos) at the inlet & outlet of ciol, auto purge valve wherver required, necessary vibration isolation arrangement including Canvas connection etc. complete as per specification & of following capacities ( Make edgetech / System air / Flakt group) |
| 3 | S/I/T/C of 18700 CMH factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels cinsisting of preplasticized GI casing of thikness 0.8mm outside layer & 0.8mm inside layer with polyurethane foam(PUF) insulated factory injected between then by injected moulding M/c, complete with blower section withblower suitable for static pressure as required, minimum 2 bend GSS/PVCeliminators, cooling coil section with Al. finned copper tubes(tubes thickness not less than 0.5mm)coolingcoil of 4 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, belt drive packeage with TEFC driveMotor of efficiency class IE3 suitable for 415+ 10% olts, 50Hz, 3phase ACSupply suitably designed for variable frequicy drive applications, drain connections, stainless steel(18G) drain pan with PUF insulation,150mm dia dial type pressure gauges(02Nos) & industrial type thermometers(02Nos) at the inlet & outlet of ciol, auto purge valve wherver required, necessary vibration isolation arrangement including Canvas connection etc. complete as per specification & of following capacities.( Make edgetech / System air/ Flakt group) |
| 4 | S/I/T/C of FRP included induced draft counter flow 300 TR FRPCooling Tower with WBT 83 degree F & hot water & cold water temperature 97F/90F, flow 1200USGPM,respectively compelete with base frame, basin, foundation, piping, valves, control panel, vibration isolator, anti vibration mounting, control system for operating through BMS, Electrical cables, motor starters etc. The axial fan motor shall be IP65 Squirrel case, EFF2 with suitable RPM & Capacity.including RCC foundation Complete in all respects (make: Bell/ Mihir/ Paharpur/ Advance ) |
| 5 | S/I of New PVC Armoured AL Cable for New Cooling Tower of size 501(j)25 Sqmm 3.5Core |
| 6 | SB of Safe Earthing Electrode T-19, ( Hot Dip Ga14lvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipeof 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductive propertywith 50 kgs activatedsoil(BFC) capable of reducing the soil resistivity with good mixture of retainingcapacity and one earthing lead of 25mm x 3mm G.I. strip, up to switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. |
| 7 | Supply and laying of 25mm x 6mm G.I. strip from earth electrod directly in the ground as required complete in all respects. |
| 8 | S/I/TC of condenser water pipes of following sizes of MS \"C\" class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.Note- The pipes size 150mm & below shall be M.S. \"C\" class as per IS: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS:3589, from minimun 6.35mm thick M.S. sheet for pipes upto 350mm dia. And from minimum 7mm thick MS sheet for pipes of 400mm dia and above. 250 mm dia (including dismantling & shifting of existing Condenser pipe at the required place) |
| 9 | S/I/T/Cof 200mm dia Butterfly valve Manual with CI body SS disc nitrile sheet & O-ring & PN 16 pressure rating as specified. (gauges & strainers for condenser water circulation as per specifications) |
| 10 | Supply and fixing of 25sqmm palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per direction of the Engineer-incharge. |
| 11 | S/L/F/T/C of following nominal sizes of chilled water piping inside the building(with necessary clamps, vibration isolators, fittings but excluding valves,stainers, gauges etc.) insulated with following closed cell elastometric nitril rubber of minimum 45Kg/cu density, thermal conductivity 0.037W/MK or better at 20deg. mean temperature class O insulated applied by suitable adhesive complete including repairing of damage to building etc. asper specifications & as required complete in all respects Make: Jindal hissar/Tata/ Jindal StarNote:- The pipe of sizes 150mm & below shall be M.S. class as per IS: 1239 & pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. sheet for pipes upto 350mm dia & from minimum 7mm thick M.S. sheet for pipes of 400mm dia & above. (including dismantling & shifting of existing chilled water pipe at the required place)(A) 200mm dia insulation thickness 32mm |
| 12 | (B) 150mm dia insulation thickness 32mm |
| 13 | (C) 125mm dia insulation thickness 32mm |
| 14 | (D) 100mm dia insulation thickness 32mm |
| 15 | (E) 80mm dia insulation thickness 32mm |
| 16 | (F) 65mm dia insulation thickness 32mm |
| 17 | (G) 50mm dia insulation thickness 32mm |
| 18 | (H) 40mm dia insulation thickness 32mm |
| 19 | (I)32mm dia insulation thickness 19mm |
| 20 | S/I/T/Cof 150mm dia insulated Butterfly valve Manual with CI body SS disc nitrile rubber seal & O-ring & PN 16 pressure rating as specified. (gauges & strainers in the chilled water plimbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.) make: Rapid cool/Zoloto / Sant or equivalant |
| 21 | S/I/T/Cof 80mm dia insulated Butterfly valve Manual with CI body SS disc nitrile rubber seal & O-ring & PN 16 pressure rating as specified. (gauges & strainers in the chilled water plimbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.) make: Rapid cool/Zoloto / Sant or equivalant |
| 22 | S/I//T/C of65 mmDia insulated Butterfly valve manual with SS Disc nitrile rubber seal and O-ring & PN 16 pressure rating as specified (Guages and strainers in the chilled water plumbing duly insulated to the same specifications as the connected piping & adequately supported. As per specification) make: Rapid cool/Zoloto/Sant or equivalant |
| 23 | S/L//T/C of 65mm insulated Balancing valves with built in measuring facility with CI body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled water/ hot water circulation plumbing duly insulated to the same specifications as the connected piping & adequately supported. make: Rapid cool/Zoloto / Sant or equivalant |
| 24 | S/L//T/C of 80mm insulated Balancing valves with built in measuring facility with CI body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled water/ hot water circulation plumbing duly insulated to the same specifications as the connected piping & adequately supported. make: Rapid cool/Zoloto / Sant or equivalant |
| 25 | S/L//T/C of 150mm insulated Non Return valves with duel plate of CI body SS Plates valcanized NBR sealflanged end & PN 16 pressure rating for chilled water/ hot water circulation plumbing duly insulated to the same specifications as the connected piping & adequately supported. make: Rapid cool/Zoloto / Sant or equivalant |
| 26 | S/L//T/C of 150mm insulated Y- Strainer of ductable CI body flanged end with stainless steel sraoner for chilled water/ hot water circulation incuding insulation. make: Rapid cool/Zoloto / Sant or equivalant |
| 27 | S/L//T/C of 80mm insulated Y- Strainer of ductable CI body flanged end with stainless steel sraoner for chilled water/ hot water circulation incuding insulation. make: Rapid cool/Zoloto / Sant or equivalant |
| 28 | S/L//T/C of 65 mm insulated Y- Strainer of ductable CI body flanged end with stainless steel sraoner for chilled water/ hot water circulation incuding insulation. make: Rapid cool/Zoloto/Sant or equivalant |
| 29 | S/I/T/Cof 200mm dia insulated Butterfly valve Manual with CI body SS disc nitrile rubber seal & O-ring & PN 16 pressure rating as specified. (gauges & strainers in the chilled water plimbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.) make: Rapid cool/Zoloto/Sant or equivalant |
| 30 | S/L//T/C of 200mm insulated Y- Strainer of ductable CI body flanged end with stainless steel sraoner for chilled water/ hot water circulation incuding insulation. make: Rapid cool/Zoloto/Sant or equivalant |
| 31 | S/L//T/C of 150mm insulated Y- Strainer of ductable CI body flanged end with stainless steel sraoner for chilled water/ hot water circulation incuding insulation. make: Rapid cool/Zoloto/Sant or equivalant |
| 32 | S/I//B/C of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene tubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thichness complete as required. Thickness 0.63mm |
| 33 | S/I//B/C of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene tubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thichness complete as required. Thickness 0.80mm |
| 34 | Highly skilledlabour for dismantling and shifting of AHU, Cooling tower, Chilled water pipe & hot water generator etc. work |
| 35 | Fitter Grade-1 for dismantling and shifting of AHU, Cooling tower, Chilled water pipe & hot water generator etc. work |
| 36 | Mate (4 number) for for dismantling and shifting of AHU, Cooling tower, Chilled water pipe & hot water generator etc. work |
| 37 | Fitter Grade-1 for dismantling and shifting of AHU, Cooling tower, Chilled water pipe & hot water generator etc. work |
