Tender For Upgradation Of Street Light And High Mast With 03 Years Amc At I.A. Mega Food Park Baheri Distt. Bareilly
Tender Value
1.41 Crore
Estimated cost
Bid Submission
14 Dec 2023
0 days left
EMD
3.34 Lakhs
Bank guarantee accepted
Document Fee
4926
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baheri → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation Of Street Light And High Mast With 03 Years Amc At I.A. Mega Food Park Baheri Distt. Bareilly
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Dec-2023 | Extension of date | Date | 14-Dec-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of 16 mtr. High mast shaft of approved make with Rising system hot dip glavanizedinside& out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferntial weld, with accessoies for high mast such as head frame suitable for 6 to 12 limminaries & its control gear boxes 1.5 HP power tool moter 3 point suspension system with steel wire rope 6 mm. dia double drum winch including making suitable foundation as per manufature drawing/ site requirment along with foundation bolts nuts, washer, anchor plates etc complete in all respects (With three year all Type Repair & Maintenance Warranty) as per UPPWD Sch. No.652 (Bajaj/Crompton/Approved Make) |
| 2 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 200 watt confirming to IP 66 protection complete in all respects (With 5 Year Gaurantee(3+2) Three year all type (including Damage & Theft, Repair & Maintenance) and Extra Two Year Gaurantee). Catt. AA as per UPPWD Sch. No.1455 (For High Mast 16 Meter) (Bajaj /Philips/Crompton/Wipro Make) |
| 3 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for 150 watt confirming to IP 66 protection complete in all respects (With 5 Year Gaurantee(3+2) Three year all type (including Damage & Theft, Repair & Maintenance) and Extra Two Year Gaurantee). Catt. AA as per UPPWD Sch. No.1455 (For High Mast 16 Meter) (Bajaj /Philips/Crompton/Wipro Make) |
| 4 | Supply & Erection of 8 Mtr. Long GI Octogonal Pole of Approved make having (70mm top dia, 135 mm bottom dia,base plate 12 mm thick) having 3 mm thickness with double arm bracket(1 Mtr. length) on RCC foundation (500x500x1600 mm) including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete in all respect as per PWD Sch. No. 644 (Philips,Crompton,Bajaj,Approved Make) |
| 5 | Supply & fixing of LED street light fittings having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt LED light confirming to IP 66 and above protection complete in all respect as per UPPWD Sch. No.1424 CAT- AA (Bajaj /Philips/Crompton/Wipro Make) |
| 6 | Supply & Fixing of 32 MM Dia 1.20 Mtr. long G.I Pipe Bracket For Fixing of LED lights complete in all respects with clamp etc. |
| 7 | Supply & fixing of 6 Amp.To 32 Amp. SP MCB (10KA) C curve Cat-B as per UPPWD Sch. No. 1002 |
| 8 | Supply & fixing of heavy duty cadmium plated copper connector with end plate complete in all respects (c) four way connector HKM 100 as per UPPWD Sch. No.1128 |
| 9 | Supply & fixing of crimping, solderless copper tin electroplated lugs of Dowells/Ismail make suitable for 1.5 sq.mm to 2.5 sq.mm cables, including tapping with insulating tape complete in all respects as per UPPWD Sch. No.1129 |
| 10 | Supply & wiring of submain with 2 Nos.of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P reuired for proper completion of the work as directed as site by Engineer I/C as per UPPWD Sch. No.289 |
| 11 | Supply & erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuse and instrument chamber etc. complete in all respects. (Incoming 100 Amp.,TPN-1 Nos.,Outgoing 63 Amp.TPN-1 Nos. and 32 Amp.TPN-2 Nos. as per UPPWD Sch. No. 801-C(ii) |
| 12 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(f-ii)40 Amp.TPN |
| 13 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(d-ii)15 Amp.TPN |
| 14 | Supply & laying 16 sq.mm 4 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V grade in existing HDPE/GI pipe &Surface laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(i) & 507 (Polycab/Havells/ Grandlay/Gloster Make) |
| 15 | Supply & laying 25 sq.mm 3.5 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V grade in existing HDPE/GI pipe &Surface laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(j) & 507 (Polycab/Havells/ Grandlay/Gloster Make) |
| 16 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (i) 16 sq. mm 4 core |
| 17 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer-incharge as per UPPWD sch. no. 503 (k) 25 sq. mm 3.5 core |
| 18 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm |
| 19 | S/F ofpalm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (e) 25 sq. mm |
| 20 | Supply & Laying of 63 mm dia DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning andprotective covering etc. complete in all respect. |
| 21 | Supply & Laying of 63 mm dia DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. througth horizontal boring trenchless (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning andprotective covering etc. complete in all respect |
| 22 | S/B of 40 mm dia x 4.5 mtr. long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 |
| 23 | Supply and laying of 25 mmx3mm G.I. strip from earth electrode directly in the ground as required respects as per UPPWD Sch. No. 716 |
| 24 | Supply & fixing of 50 mm dia G.I.pipes \"B\" class for climbing up the cable from ground to over head line including all accessories, material, labours and T&P required for proper completion of work as per specification as per SIDC Sch. No. 25.1 |
| 25 | Fabrication,Supply & Fixxing of work information board in M.S frame made by 50 mm dia sqaure pipe of stainless steel grade SS-304 &16 mm thick base plate with back supporting of bracing by MS flat of 25x6 mm and 2.85 Mtr. Long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green colour with white letters as required and shall be fixed at a height of 1.2 Mtr. from ground by providing 0.45x0.45x0.60 Mtr. cement concrete stone pad |
| 26 | (Part-B) Supply&errection of double pole structure with hardware & fittings on 410 SP-56,11 mtr. Long complete with 1/6 th of over all length of pole in cement concrete with one feet square/one feet dia cement ,concrete plinth around the pole above ground level . The foundations of underground will be of cement concrete in the ratio 1:2:4 .The stone ballast/brick-ballast used will be 1.25 cm (1/2x1) size with the stone pad 30x30x7.5 cm at the base , including all T&P, men & material for proper completion of work as per direction of Engineer in charge |
| 27 | Supply&errection of Stay set of HT Line for ST pole with GI anchor plate(152x152x6mm) stay rod (16mm dia x 1.85 mtr.long) GI stay below (16 mm dia, thriple ,double stay, tightener ,stay insulator ,clamps & stay wire (GS 7/13 .15 mm) including grouting in 1:4:8 ratio of cement concrete using course sand ,over brunt brick ballast. including all T&P, men & material for proper completion of work as per direction of Engineer in charge |
| 28 | Supply & fixxing of 11 KV pin with insulator on channel arm fixed on ST/DP including cost of nuts,bolts,washers,T&P men & material for proper completion of work as per direction of Engineer in charge |
| 29 | Supply & fixxing of anticlimbing device fabricated grom G.I flat of 25mmx6mm size in a sape of ring of the pole size, having G.I flat pointed fins of the length 225 mm in 8 nos. and also barbed wire in 200 mm length above the said ring including material for proper completion of work as per direction of Engineer in charge |
| 30 | Supply & fixxing of M.S Top channel of 125x65x2240 mm including cost of holding clamps and materials for proper completion of work as per direction of Engineer in charge |
| 31 | Supply & fixxing of M.S droper channel of 100x50x2000 mm including cost of holding clamps and materials for proper completion of work as per direction of Engineer in charge |
| 32 | Supply & Fixxing of 11 KV TPMO with complete with insulator & other accessories (Relco/Azad/Rama/other standard make as approved by UPPCL) proper completion of work as per direction of Engineer in charge |
| 33 | Supply and fixing of danger board fabricated from 10 gauge M.S.sheet as per I.E.Rules.UPSIDC E27.01 |
| 34 | Supply,sagging,tensioning,jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including material,men an T&P for proper completion of work.UPSIDC E.10.(a) |
| 35 | S/F of 11 kV three phase D.O. fuse set complete with suitable clamps, nuts & bolts, fuse wire etc.as per Stock issue rate 2023-24 of UPPCL Sr no.93 |
| 36 | Supply and installation,testing & commissioning of outdoor type aluminium wound oil cooled transformer of ratings 25 KVA, 11/.04 KV on double pole including cost of base channel & holding clamps.complete as per IS-1180-2014 (Discom Approved Make) proper completion of work as per direction of Engineer in charge |
| 37 | Supply & laying 70 sq mm 3 core Al. conductor XLPE insulated PVC bedded galvanised flat steel striparmoured, served, sheated cable 1100 V grade laid with brick,sand with 75 cm deep below the ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 506(d) (Polycab/ Havells/ Grandlay/ Gloster Make) |
| 38 | Supply & Laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning andprotective covering etc. complete in all respect. |
| 39 | Supply & Laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc.througth horizontal boring trenchless (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning andprotective covering etc. complete in all respect. |
| 40 | S/F of outdoor/indoor type 11 KV jointing kit heat shrinkable type for 11 KV cable including cost of all material, labour, T&P etc. for proper completion of work. (Raychem, Denson/Birla /3M make) for 3 core x 70 sq.mm cable. |
| 41 | Supply & fixing of 11 KV straight through jointing kit heat shrinkable type for 11 KV cable including cost of all material,labour, T&P etc. for proper completion of work (Raychem/Denson/Birla/3M make) for 70x3 sq.mm cable. |
| 42 | Making plinth for installation of transformer of size 1x1.5x1.10 M plinth complete with excavation base concrete with 1:4:8 (padding) first class brick work in ratio 1:3, CC work and plastering as per design. |
| 43 | Supply & fixing of welded wire mesh fencing of 5x3x2.4 meter and 2x2.4 M gate including excavation base concrete & brick work with back filling etc. complete in all respect. |
| 44 | S/B of 600x600x6mm G.I. plate vertically for earthing with its top at least 3 M. below ground level complete with 20 mm dia G.I.pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15 mm dia G.I.pipe up to switch board ( from appron to switch board the cost of G.I.pipe and G.I. wire be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcole /Coke and salt at least 150mm thick around etc. as per directions of Engineer-in-charge complete in all respect as per as per drawing as per UPPWD Sch. No. 702 |
| 45 | Supply & fixing of 100 mm dia G.I.pipes \"B\" class for climbing up the cable from ground to over head line including all accessories, material, labours and T&P required for proper completion of work as per specification as per SIDC Sch. No. 25.1 |
| 46 | (AMC)Lowring of 30/16 Mtr. High mast lighting system complete in T&P men & material required proper completion of work as per direction of Engineer-in charge as per sanctioned Job No. ED-1(66) Dated 20.10.2021 |
| 47 | S/F of ML-4 contactor MDS/L&T make complete including all T&P men and material required for proper completion of work |
| 48 | Supply & Fixing of 63 Amp 4 pole MCB complete in all respects as per UPPWD Schedule No.1020(A) Cat-B |
| 49 | S/F of mounting time switch (timer Clock) L&T/MDS make complete including all T&P men and material required for proper completion of work |
| 50 | S/Oiling of winch machine for High Mast lighting system complete including all T&P men and material required for proper completion of work as per direction of Engineer-in charge |
| 51 | S/F of Male-Female plug & socket for High Mast lighting system complete including all T&P men and material required for proper completion of work as per direction of Engineer-in charge |
| 52 | Supply & fixing of driver suitable for (70 to 110 watt) LED street light fittings as per make installed at Site complete in all respect |
| 53 | Supply & fixing of MCPCB with LED & Lance (70 to 110 watt) for suitable installed LED street light fittings complete in all respect |
| 54 | Supply & Fixing of Glass suitable for installed(70 to 110 watt) LED street light fittings complete with rubber gasket etc. complete in all respect |
| 55 | Supply & fixing of LDR suitable for installed (70 to 110 watt) LED street light fittings complete in all respect |
| 56 | Supply & fixing of special protection device (SPD) suitable for (70 to 110 watt) LED street light fittings as per make installed at Site complete in all respect |
| 57 | Charges for maintenance, Proper Watch&ward of entire electrical system of Street light, High Mast Tower, cables,conductors,poles,panels etc. all other available material as per direction of Engineer-in charge etc. for road lighting in IA to cover the general supervision for execution of work including dismantling & re-fixing of all street light of UPSIDA during the period of AMC for (36 Months) (With manpower- 01 Electrician & 02 Helper) |
| 58 | Cost of all material, spares wire fuses, small accessories required for general maint., cleaning, oiling/gressing etc. to keep the entire installation of street lighting & High Mast towers in perfect working condition during Annual Maintenance Contract period.for (36 Months) (L.S. Basis) as per direction of Engineer-in charge |
| 59 | Supply & laying 16 sq.mm 2 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V grade in existing HDPE/GI pipe &Surface laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(c) & 507 (Polycab/Havells/ Grandlay/Gloster Make) |
| 60 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (c) 16 sq. mm 2 core |
| 61 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm |
| 62 | Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 16 sq.mm 2 core/16 sq.mm 4 core cable of 1100 v grade complete rates as per DSR no. 9.2.1 |
| 63 | Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25 sq.mm 3.5 core cable of 1100 v grade complete rates as per DSR no. 9.2.17 |
| 64 | Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 16 sq.mm 4 core cable of 1100 v grade complete rates as per DSR no. 9.3.1 |
| 65 | Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25 sq.mm 3.5 core cable of 1100 v grade complete rates as per DSR no. 9.3.17 |
AI Tender Summary
Tender Timeline
Dec 07, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 14, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender