Construction Of Black Top Road From Ujjal Sangha Club To Bfs Road Near H/O. Pelu Ghoshal At Ward No -02 Under Haringhata Municipality For The Year- 2022-2023.
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
15 Dec 2023
0 days left
EMD
15007
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
haringhata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Black Top Road From Ujjal Sangha Club To Bfs Road Near H / O. Pelu Ghoshal At Ward No -02 Under Haringhata Municipality For The Year- 2022-2023.
BOQ
| Sl. No. | Item Description |
| 1 | Page No. - 244 Serial No.4.10 ( i )Water Bound Macadam Sub Base by consolidating Jhama metal / Laterite chelly or stone metal / shingles of specific size in hard crust to requisite thickness (measured after compaction) in layers including screening of metals etc. as necessary, hand packing, sweeping, watering and rolling in stages with power roller to proper line, grade and camber, lighting, guarding & barricading and making necessary earthen bundh of one metre width on each side where necessary to protect edges and preparing the bed by necessary cutting or filling and rolling all complete including the cost of all materials and hire and labour charges of all men and machineries and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). 10 % & 100% of the Surface Using Jhama metal(1.09 cum of loose volum ),Moorum(0.26 cum of loose volume )/m3 |
| 2 | Page no 245 / item no 4.11Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate,watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (iii) Grading-2 Aggregate (53 mm to 22.4 mm) Using Stone Screening Type B B. Manual Means Add cost at site of 1.21 m³ of Grading-2 Aggregates & 0.24 m³ Stone Screening Type-B to arrive at the complete rate. |
| 3 | Page no 251 / item no 5.01Primer CoatProvidingandapplyingprimercoatwithCationic Bitumen Emulsionof approvedgrade conforming to IS:8887-1978andrequisitequantityonprepared surfaceofgranularbaseincludingcleaningofroad surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work completeasperClause502ofSpecificationsfor Road & Bridge Works of MoRT&H (5th Revision). (i)For WBM / WMM Surface:(with primer @ 0.70-1.0 kg/sqm) |
| 4 | Page no 251 / item no 5.02(ii) Tack Coat Providing and applying tack coat with CationicBitumen Emulsionof approvedgrade conforming to IS:8887-1978onthepreparedsurfacecleanedwith Hydraulicbroom,moisteningthesurfaceincluding cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all completeasperClause503ofSpecificationsfor Road & Bridge Works of MoRT&H (5th Revision))ii)On Granular surfaces treated with primer(UsingBitumenemulsionattherateof0.25to 0.30 kg per sqm.) . |
| 5 | Page no 248 / item no 5.02Providing and laying bituminous macadam with Mobile Hot Mix Plant (Light Duty) using approved crushed aggregates of specified grading as per Table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature by means of approved and suitable arrangements to the required grade, level and alignment and rolled with suitable power roller for break down, inter-mediate and finished rolling as per specification to achieve the desired compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per Specifications for Road & Bridge Works of MoRT&H (5th Revision). B. For Grading 2 (19 mm nominal size, 50-75 mm thick.). |
| 6 | Page no 251 / item no 5.02(i) Tack Coat Providing and applying tack coat with CationicBitumen Emulsionof approvedgrade conforming to IS:8887-1978onthepreparedsurfacecleanedwith Hydraulicbroom,moisteningthesurfaceincluding cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all completeasperClause503ofSpecificationsfor Road & Bridge Works of MoRT&H (5th Revision))i)On Bituminoussurfaces treated with primer(UsingBitumenemulsionattherateof0.20to 0.30 kg per sqm.) over Bitumenous Surface. |
| 7 | Page no 253 / item no 5.11Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD. Applying Tack Coat (Bitumen Emulsion @ 0.275kg/m2 |
| 8 | Page no 254 / item no 5.13 (B)Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). II ) By Manual MeansWith Hot Bitumen Binder (@ 6.80 kg / 10 sqm.) |
| 9 | Page no - 1 & Item no - 2(a)Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete (a) Depth of excavation not exceeding 1,500 mm. |
| 10 | Page no -1 & Item no - 3(a)Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation. |
| 11 | Page No-47,Item-3: Supplying and laying Polythene Sheet(150gm / sq.m.) over damp proof course orbelow flooring or roof terracing or infoundation or in foundation trenches. |
| 12 | Page no -34 & Item no - 22 (1) (a) Cement concrete with graded stone ballast (40 mm size excludingshuttering) In ground floor (A) [Pakur Variety](a) 1:3:6 proportion |
| 13 | Page no -15 & Item no - 8a Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 14 | Page no-42& Item no -36 a Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation |
| 15 | Page No:-28, Item No:-15Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (JSW/JSPL/SHYAM/ SRMB/ BMASL/ ELECTROSTEEL/SSL) |
| 16 | Page no -26 & Item no - 10(i) Odinary cement concrete (mix 1:1.5:3 ) with graded stone chips (20 m.m. nominal size ) excluding shuttering and reinforcement if any ,in ground floor as per relevant IS code |
| 17 | Page no-189 & Item no -1Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar. (c) 15 mm thick plaster. |
| 18 | Page no-192 & Item no -15Neat cement punning about 1.5mm thick in all,dado,window sill,floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 19 | Page No - 270/it no. 8.07 Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforcedwith double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precastposts 100 mm. x 150 mm. of height 2.65 m. of which top750 mm. is of section 100 x 13 mm. and 1.90 metreabove GL & 0.75 metre below GL including digging hole,repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces letteringsign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement,concrete, shuttering, nuts & bolts, washer etc. Comlete ) . |
| 20 | ADD GST |
| 21 | CESS |
AI Tender Summary
Tender Timeline
Nov 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender