|
| 1 | B/R PORTIONS&F wall panelling on existing wall surface consisting 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer\"s instructions to be fixed on wall by self tapping screw of size 19mm x 6mm after putting rawal plugs. The edge and periphery finally to be covered by extruded PVC corner angles beading/fillet complete all as specified and as directed by Engr-in-Charge. |
| 2 | S & F 5 mm thick PVC sheet fillet / beading of width 35 mm for wall panelling inclusive of fixing on wall to make PVC frame as per manufacturer\"s instructions complete all as specified and as directed. |
| 3 | M&L for anodised aluminium snap grid frame workof size 605x605mm for false ceiling complete all as specified and as directed. |
| 4 | M&L for 12 mm thick decorative Gyproc grey waterproof gypsum board fixed or laid / inserted to aluminium frame work fixed in joint less finish with jointing compound and tape as per manufacturer\"s instructions complete all as specified and directed. |
| 5 | M&L 2nd class hard wood in scantling, wrought, planed all around timber framed and fixedwith nails as in walls,floors complete all a specified and directed by Engr-in-Charge. |
| 6 | M&L French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old/new works with one or more coats complete all as specified and directed. |
| 7 | S&F 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work complete all as specified and directed. |
| 8 | M&L 2nd class hard wood as in plain fillets square, clean sawn exc. 13 sqcm but n.exc 25 sqcm in section, fixed with nails complete all as specified and directed. |
| 9 | S&F Providing and fixing Powder coated aluminium section (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom andsideswithrequiredEPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified & directed. |
| 10 | S&F anodised aluminium door shutters, aluminium section wieghting 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified complete all as specified and as directed.Note : Cost of addition items like rubber, neoprene packing etc as per manufacturers instruction are deemed to be included in the quoted rate). |
| 11 | M&L for Sheet tinted or plain glass, selected quality, in squares exc 0.5 sq. m each pane, 6.3mm thick of approved colour in doors, partition fixed with and including rubber beading complete all as specified & directed. |
| 12 | S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified & directed. |
| 13 | S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified & directed. |
| 14 | S&F aluminium handles, anodised, cast type, of size 150 mm complete all as specified & directed. |
| 15 | M&L 140 mm for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified & directed. |
| 16 | M&L for 304 grade stainless steel work as in railing made of hollow tubes,channels plates, etc with hand rail, baluster, including cutting, Stainless steel welding ,cutting,buffing,grinding,polishing and fixing of stainless steel baluster/railing with necessary accessories of required size etc complete all as specified and directed. |
| 17 | M&L for 12mm thick clear designed toughened glass fixed to railings, door , window as directed by Engr-in-Charge including necessary acessories, nails, cleats, screw complete all as specified and directed. |
| 18 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets Complete all as specified and as directed. |
| 19 | S&F of decorative type mineral fibre acoustic suspended ceiling system with prima fine fissured tile with semi concealed grid , the tile should have humidity resistance (RH) of 99% , NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part6 &7) in module sizeof 600x 600x16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled content of 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. all as per manufacutrer\"s instructions Complete all as specified and as directed.( Make : Armstrong, saint Gobain or equivalent and approved make. |
| 20 | Taking down shutters of any description butexc 1 Sqm but n exc. 2 Sqm each complete all as specified and as directed. |
| 21 | S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round complete all as specified and directed. |
| 22 | M&L for 0.9 mm thick decorative laminate type 1,of surface finish, colour and pattern as approved, fixed with approved adhesives as per manufacturer\"s instructions and as directed. |
| 23 | M&L for 200 mm long brass, skelton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed complete all as specified and directed. |
| 24 | M&L for 140 mm long door stopper of brass body and tongue with hard drawn steel springcomplete all as specified and directed. |
| 25 | S&F 150mm long extruded brass handles, fabricated type polished complete all as specified and directed. |
| 26 | S&F Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed. |
| 27 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)exceeding 1.5 sqm but not exc 4.00 Sqm each and removing from site complete all as specified and directed. |
| 28 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified and directed. |
| 29 | Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed. |
| 30 | S&F anodised aluminium door shutters, aluminium section wieghting 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified complete all as specified and as directed.Note : Cost of addition items like rubber, neoprene packing etc as per manufacturers instructions are deemed to be included in the quoted rate. |
| 31 | S & F 6 mm thick frosted glass ordinary quality and glazing with rubber sealing strip,neoprene packing in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 32 | S & F 150 mm Aluminium anodised barreltower boltsof extruded section and fixed complete all as specified and directed. |
| 33 | S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specified and directed. |
| 34 | Demolition of brick work or stone masonry / PCC block walling built in cement mortar or cement lime mortar incl arches, pillers etc.complete all as specified and as directed. |
| 35 | M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 36 | M&L for rendering 15mm thick on concrete block/ brick or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 37 | M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work & concrete, finished even and fair on external wall surfaces complete all as specified & directed. |
| 38 | M&L for applying two coats of acrylic emulsion paint (lustar paint) internally over a coat of acrylic primer over 2mm thick coat of waterproof putty in two layers on old or new plaster surfaces of wall including preparation of surfaces complete all as specified and directed. |
| 39 | M&L fortwo coats ofexternal waterproofemulsion paint Apex Ultima or equivalent complete all as specified and directedover a coat of alkali resistant primeronnew /old plasteredsurfaces of wall including necessary scaffolding required for painting work & safety measurescomplete all as specified and as directed . |
| 40 | Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above GL all as directed &cleaning premises complete all as specified and as directed. |
| 41 | M & L forcement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed. |
| 42 | M&L for full body colour Marbletiles glossy finish 9-10 mm thick (square/regtangular) polished , stain proof and durable ad abrasion resistant with high flexural strength area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 43 | M&L for fullbody colour Marbletilesglossy finish 9-10 mm thick (square/regtangular) polished , stain proof and durable ad abrasion resistant with high flexural strength area area of each tiles ( 600 mm X 1200 mm) ornot exc 1.28 sqm in skirting/vertical surfaces etc. as per manufactureres specification confirm to IS 13630 and ISO 10545 and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 44 | S&FTable top Wash hand basin, vitrous china, coloured flat back of size 470 x 470 x 110 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy with 150mm extention body fixed spout without popup waster system with 600mm long braided hoses complete all as specified and directed. Make :- For WHB (Jaguar Model No. FSS-WHT-2990) & for Single lever mixer Model No. FUS-29005NB. |
| 45 | M & L for granite 18mm thick (of any type) work (table rubbedand one edge rounded for jambs and polished) in verticle surfaces,steps, jambs, pillars, window-cills, window Jambs and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 46 | M&L for 50mm cupboard magnet including high quality magnet and steel plate complete all as specified and directed. |
| 47 | S&F 40mm width of flaps (when open) in mm continous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 48 | S&F 150mm brass cupboard handles, cast type, polished bright fixed with nut screws and washers complete all as specified and directed. |
| 49 | S&F Vitrious china EWC rimless single piece WC with UF slim seat cover, hinges, fixing accessories set, cistern fittings size 370 x 665 x 770mm, S trap 300mm complete all as directed by Engr-in-Charge. Make :- Jaguar (Model No. FSS-WHT-29853S300UFSM) |
| 50 | S&F vitrious china urinal without sensor with fixing accessories set size - 480 x 300 x 740mm complete all as specified and directed.Make :- Jaguar (Model No. URS-WHT-13255). |
| 51 | S&F chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.Make :- Jaguar (Model No. FUS-29053) |
| 52 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mmcomplete all as specified & directed. |
| 53 | S&F stainless steel grating doom 100mm dia complete all as specified & directed |
| 54 | S&F inPVC (SWR) floor trap, dia of outlet 100 mm, plain with grating including jointing with solvent cementcomplete all as specified & directed. |
| 55 | S&F Chromium Plated Toilet Roll Paper Holder with stainless steel flap complete all as specified and directed. Make - Jaguar (Model No :- CAN -1153S) |
| 56 | S&F Chromium Plated Toilet rail 600mm long complete all as specified and directed. Make - Jaguar (Model No :- ACN -1111SM) |
| 57 | S&F Chromium Plated soap dish holder complete all as specified and directed. Make - Jaguar (Model No :- ACN -1131N) |
| 58 | S&F Chromium Plated soap dispenser with glass bottle complete all as specified and directed.Make - Jaguar (Model No :- ACN -1135N) |
| 59 | S&F sheet glass shelf assembly consisting of 5mm thick sheet glass shelfwith chromium plated bracket guard and railing 600mm long complete all as specified and directed. Make - Jaguar (Model :- CAN -1171N) |
| 60 | S & F continental Swivel glass mirror with chrome finish and luxury look superior built quality product complete all as specified and as directed.Make :Jaguar Model No:CAN-CHR-1195 N |
| 61 | S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed. Make :- Jaguar or equivalent in specified makes as approved. |
| 62 | S&F Chromium plated Jet Spray with CP connection pipe for EWC 15mm bore with fittings complete all as specified and directed. Make :- Jaguar or equivalent in specified makes as approved. |
| 63 | S&F 15mm dia bore, two way bib cock with wall flange, screwed down for uPVC/iron Pipe complete all as specified and directed. Make :- Jaguar (Model No. FUS-29041) |
| 64 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed. |
| 65 | S&F for 20mm dia CPVC pipes SDR 11 including all BrassCPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors complete all as specified & directed. |
| 66 | S&F for 15/16mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 16mm bore pipe on walls/ceiling or laying in floors complete all as specified & directed. |
| 67 | M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubingand making good complete all as directed by Engr-in-Charge. |
| 68 | S&F1000 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 20mm high pressure with polythene float and fly nut complete including dismantling existing water tank and removing to store all as specified and directed. |
| 69 | S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall of size 110mm borecomplete all as specified & directed. |
| 70 | S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor of 75mm borecomplete all as specified & directed. |
| 71 | S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, joints fixed to wall of 75mm borecomplete all as specified & directed. |
| 72 | S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and directed. |
| 73 | S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm borecomplete all as specified and directed. |
| 74 | S&F PVC (SWR) bends any radius 110 mm bore with access door complete all as specified and directed. |
| 75 | S&F PVC (SWR) bends any radius 75 mm bore with acsses door complete all as specified & directed. |
| 76 | S & F PVC (SWR) vent cowl 110mm Bore complete all as specified and directed. |
| 77 | S & F PVC (SWR) vent cowl 75mm Bore complete all as specified and directed. |
| 78 | S&F for Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mmincluding bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 79 | Cutting into existing manholes for connecting new drains internal dia of pipe110mm making good to pipe & toor finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering complete all as specified and as directed. |
| 80 | E/M PORTIONM & L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through PVC concealed conduit fixed to walls/ roofs/ floors / ceiling etc. and including provision of PVC conduit, 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth bolly, including cutting and chealing, modular cover plates and modular flush boxed, Plate for mounting for housing the switches, socket outles, fan regulators etc, for the following all as specified and as directed.Note : Cost of cutting chases as per requirement & making good the disturbed surfaces to match with existing finishes shall deemed to be included in quoted rate.(a) One light point controlled by one way switch. |
| 81 | (b) One fan/exhaust fan point controlled by one switch and one regulator. |
| 82 | (c) One 3 pin switch socket outlet point 5 Amps on independent board. |
| 83 | (d) One 3 pin switch socket outlet point 5 Amps on same board with other switch. |
| 84 | All as per item No 80.00 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size all as specified and as directed. |
| 85 | S & Fix modular switch 1 way 6A, 1 module all as specified and as directed. (Colour of the frame and the switches to be provided in foyer & conference room shallbe matched to the wall panelling or as directed by Engr-in-charge). |
| 86 | S & Fix modular switch 1 way 16A, 1 module all as specified and as directed. (Colour of the frame and the switches to be provided in foyer & conference room shallbe matched to the wall panelling or as directed by Engr-in-charge). |
| 87 | S & Fixmodular socketout let 6A 2/3 on combined 2 module all as specified and as directed. (Colour of the frame and the switches to be provided in foyer & conference room shallbe matched to the wall panelling or as directed by Engr-in-charge). |
| 88 | S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module all as specified and as directed. (Colour of the frame and the switches to be provided in foyer & conference room shallbe matched to the wall panelling or as directed by Engr-in-charge). |
| 89 | S & Fix of recess mounted 2\" x 2\" square LED panel 36 watts(Warm/ White as directed), Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/ Grid ceiling all as specified and as directed. |
| 90 | S & F LED Tube light fitting 10 watt (Warm / White as directed), 230 volts, sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work & retail spaces complete with all accessories all as directed by Engr-in-Charge. |
| 91 | S & F exhaust fan, AC, single phase, 240 V, 250 mm sweep, PVC body with louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and as directed. |
| 92 | Supply and fixing of casing caping of size 10 cm including coupler and bends all as specified and directed |
| 93 | Supply and Fixing of Wall mounting fan 400 mm Sweep of approved make including all necessary fixing arrangements all as directed. |
| 94 | Supply and fixing of LED Down Light 12 Watts (Warm White / White as directed) recessed type with PC housing & Opal PC diffuser with Independent electronic LED driver including all necessary fixing arrangements all as directed |
| 95 | Supply and fixing of Flexiible LED strips / profile lights (Warm White / White / colour as directed) of 2 Amps capacity with optimum brightness & uniformity of light including all necessary fixing arrangements all as directed |
| 96 | Supply and fixing of Driver for Strip Light / profile including all necessary fixing arrangements all as directed |
| 97 | Supply and Fixing of LED Track Light 15 Watts luminarie (white / warm white as directed) complete fitting with all fixing arragements all as directed. |
| 98 | Supply and Fixing of LED Track Light Accessories (1Mtr - Track) complete inlcuding fixing arrangment all as directed. |
| 99 | Supply & fix 5 Watts LED Environmental friendly, compact, light weight, energy saving, IP66 LED spike light using COB LED as light source all as directed.Make : Havells: IRVINESPS5WLED830PSYMTG |
| 100 | Supply and fixing of Triton Black Post light fixture 2.5 M including excavation, PCC foundation and suitable water proof junction box for connecting the lights all as directed.Note :- Quoted rate shall deemed to be inclusive of taking out old existing u/s light post. |
| 101 | Supply and fixing of antique Light fitings including all necessary fixing arrangements all as directed.MAKE:- LUKER: LGLA2E27BK |
| 102 | Supply and Fix of2 Watt 4 way wall light LED light including drilling, fixing and installing on the exisiting wall all as specified and directed by Engr-in-Charge. |
| 103 | Supply and fixing of LED COB Light 7 Watts (Warm White / White as directed) recessed type withIndependent electronic LED driver including all necessary fixing arrangements all as directed |
| 104 | Supply and fixing of LED COB focus light 3 Watts (Warm White / White as directed) fixed on wall/floor/tiles/wooden panels including all necessary fixing arrangements all as directed |
| 105 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc. all as specified and as directed. |
| 106 | Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting pointall as specified and as directed. |
| 107 | Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm eachall as specified and as directed. |
| 108 | Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement &all as specified and as directed. |
| 109 | Supply & lay LT UG cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area all as specified and as directed.(a) 2 Core 6 SqmmNote :- 1. Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. 3.Earth work such excavation, refilling, etc. shall be measured separately under relevant items. |
| 110 | Supply and install of Tower AC indoor/outdoor type of approved make complete with cordless remote control unit for better indoor air quality of capacity 2 TR all as directed. |
| 111 | Supply and fix suction and discharge copper tubing pipe 3/8\" and 5/8\" for split type AC including provision of insulation on tubing, PVC insulated flexible multistranded copper cable 3 core 2.5 sqmm all as directed by Engr-in-charge.Note:- Cost of cutting holes in walls / ceiling for insertion of tubing shall deemed to be included in quoted rate. |
| 112 | S & Fix double door sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door duly flushed in wall and making good with existing wall, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete. |
| 113 | S & Fix of MCB single pole and neutral, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed. |
| 114 | S & Fix of MCB single pole, 240 volts, 6 to 20 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed. |
| 115 | S & Fix sheet metal enclosure distribution board SPN DB\"s 2 way duly flushed in wall and making good with exisiting wallwith SPN MCB all as directed. |
| 116 | Supply and fixing of LED COB focus light 7 Watts (Warm White / White as directed) fixed on wall/floor/tiles/wooden panels including all necessary fixing arrangements all as directed. |
| 117 | Supply & Fixing of recessed mounted LED 15 Watts (white / warm white as directed) Wall washer titled 70° outwards and swivels 350° to offer illumination on walls luminaire complete fitting with all fixing arrangement all as directed. |
| 118 | M & L for submain wiring alongwith earth wire with the following sizes of FRLSPVC insulatedcopper conductor single core cable , multistrandedduly concealed as per site requirement or on the surface through and including suitable size ofPVC casing and capping / Conduit with its accessories all as specified and directed by Engr-in -charge for the following:-Note:- Cost of cutting chases as per requirement & making good the disturbed surfaces to match with existing finishes shall deemed to be included in quoted rate. |
| 119 | (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire |
| 120 | (b) 2x4 sq mm and 1x4 sq mm as earth wire |
| 121 | (c) 2x6 sq mm and 1x6 sq mm as earth wire |
| 122 | (d) 4x4 sq mm and 1x4 sq mm as earth wire |
