Tender For Renovation Of Dispensary Entrance At Nrri, Cuttack-6, cuttack-Odisha

Tender For Renovation Of Dispensary Entrance At Nrri, Cuttack-6; 1 Civil Works: “Renovation Of Dispensary Entrance” At Nrri, Cuttack-6 2 Dismantling Damaged A.C Sheet And Rolling Shutter & Deposit To E.M. S 3 Dismantling Brick Or Stone Masonry Below 3.00Mtr. Height. 4 Shifting Of Dismantled Material 5 Earth Work In Ordinary Soil For Foundation Within 1.5 Mt. Initial Lift & 50 M Initial Lead 6 Sand Filling In Foundation & Plinth, Well-Watered And Rammed 7 Pcc ( 1:4:8 ) Using 2.5 To 4Cm Size Crusher Broken Granite Metal 8 Brick Work With Fly Ash Bricks In Cement Mortar ( 1:6 ) . 9 12Mm Thick Cement Plastering With 1:6 Cm 10 2.5 Cm ( 1 ) Thick A.S Flooring In C.C ( 1:2:4 ) 11 Rcc Work In C.C. ( 1:2:4 ) Using 12 To 20Mm Crusher Broken Hard Granite Chips For Gate Pillar 12 Supply, Cutting, Bending & Binding Of M S Rod For Rcc Work. 13 Rigid And Smooth Centering & Shuttering For Concreting Work. 14 Providing, Fitting And Fixing Factory Made Chamfered Edge Cement Concrete Paver Blocks Of Required Strength, Thickness& Size / Shape Made By Table Vibratory Method, To Attain Superior Smooth Finish Using Pu Or Equivalentmolds, Laid In Required Approved Color And Pattern Over 50Mm Thick Compacted Bed Of Coarse Sand, Compacting And Proper Embedding / Laying Of Interlocking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator , Filling Joints With Fine Sand And Cutting Of Paver Blocks As Per Required Size / Pattern, Finishing And Sweeping Extra Sand In Footpath , Parks, Lawns, Drive Ways, Or Light Traffic Parking And Lanes / Road Etc. All Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge.80Mm Thick C.C Paver Blocks Of M-30 Grade With Approved Color Design Pattern Etc. Complete. 15 Supply And Fixing 0.5Mm Thick G.I. Color Sheets On Roofs Including Drilling Holes With L / J Hooks And Topi Washer 16 Supply And Fixing M.S Pipe ( 50Mm & 40Mm ) With Truss For Pillar And Purlin Etc. Made Up Of Ms Square Pipe Including Cutting, Welding And Fitting & Transportation Etc. 17 12Mm Thick Cement Plaster In Proportion ( 1:4 ) With Punning 18 25Mm Thick Grading Concrete ( 1:2:2 ) With 6Mm Size Gr C.B Chips. 19 Supply And Fixing Frp Door Frame 20 Supply And Fixing Frp Door Shutter ( 32Mm Thick ) 21 Supply And Fixing Porcelain Ewc With Cover With All Required Fixtures. 22 Supply And Fixing Slim Line Cistern With All Required Fixtures 23 Providing, Fitting, And Fixing M.S. Rolling Shutter Including Cost Of All Materials. 24 Supply And Painting Two Coats With S.E Paint. 25 Supply And Painting Two Coats Of Weather Seal Coat Over A Coat Of Water Bound Wall Primer After Scraping And Cleaning The Surface. 26 Supply And Fixing S.S Gate With 304 Grade Steel 27 Supply, Fitting And Fixing Ceramic Wall Tiles Of Premium Grade Having Thickness 6.5 To 6.7Mm Confirming To Is 13753. Size ( 450X300 ) Mm On 12Mm Thick Cement Mortar ( 1:3 ) & Finishing Joints With Matching Grout Of Approved Design 28 Supply And Fixing 15Mm C.P Bib Cock 29 Supply And Fixing Glass Louvers 30 Supply And Fixing 50Mm Diameter 2’0” Long G.I Pipe On Gate. 31 Supply & Fixing 20Mm Upvc Pipe For Drinking Water Including All Required Fittings

Refer document

INR 34200.0 /-

INR 11.38 Lakhs /-

Name of Work: "Renovation of Dispensary Entrance" at NRRI, Cuttack-6

Sl. No.	Item Description
1	Civil works: “Renovation of Dispensary Entrance” at NRRI, Cuttack-6
2	Dismantling damaged A.C sheet and Rolling shutter & deposit to E.M. S
3	Dismantling Brick or Stone Masonry below 3.00mtr. Height.
4	Shifting of dismantled material
5	Earth work in ordinary soil for foundation within 1.5 mt. initial lift & 50 m initial lead
6	Sand filling in foundation & plinth, well-watered and rammed
7	PCC (1:4:8) using 2.5 to 4cm size crusher broken granite metal
8	Brick work with Fly ash bricks in cement mortar (1:6).
9	12mm thick cement plastering with 1:6 CM
10	2.5 CM (1") Thick A.S Flooring in C.C (1:2:4)
11	RCC work in C.C. (1:2:4) using 12 to 20mm crusher broken hard granite chips for gate pillar
12	Supply, Cutting, bending & binding of M S rod for RCC work.
13	Rigid and Smooth centering & shuttering for Concreting work.
14	Providing, fitting and fixing factory made chamfered edge cement concrete paver blocks of required strength, thickness& size/shape made by table vibratory method, to attain superior smooth finish using PU OR Equivalentmolds, laid in required approved color and pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding /laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator ,filling joints with fine sand and cutting of paver blocks as per required size/pattern, finishing and sweeping extra sand in footpath ,parks, lawns, drive ways, or light traffic parking and lanes/road etc. All complete as per Manufacturers specification and direction of Engineer-in-charge.80mm thick C.C Paver Blocks of M-30 grade with approved color design pattern etc. Complete.
15	Supply and fixing 0.5mm thick G.I. color sheets on Roofs including drilling holes with L/J hooks and Topi washer
16	Supply and fixing M.S pipe (50mm & 40mm) with truss for pillar and purlin etc. made up of MS square pipe including cutting, welding and fitting & transportation etc.
17	12mm thick cement plaster in proportion (1:4) with punning
18	25mm thick Grading Concrete (1:2:2) with 6mm size Gr C.B Chips.
19	Supply and fixing FRP door frame
20	Supply and fixing FRP door shutter (32mm thick)
21	Supply and fixing Porcelain EWC with cover with all required fixtures.
22	Supply and fixing slim line cistern with all required fixtures
23	Providing, fitting, and fixing M.S. Rolling shutter including cost of all materials.
24	Supply and Painting Two Coats with S.E Paint.
25	Supply and painting two coats of Weather seal coat over a coat of water bound wall primer after scraping and cleaning the surface.
26	Supply and fixing S.S Gate with 304 grade Steel
27	Supply, fitting and fixing ceramic wall tiles of premium grade having thickness 6.5 to 6.7mm confirming to IS 13753. Size (450x300) mm on 12mm thick cement mortar (1:3) & finishing joints with matching grout of approved design
28	Supply and fixing 15mm C.P bib cock
29	Supply and fixing Glass Louvers
30	Supply and fixing 50mm diameter 2’0” long G.I pipe on gate.
31	Supply & Fixing 20mm Upvc pipe for drinking water including all required fittings