Department Of Lighthouses And Lightships has published Tender For Provision Of Streetlights And Landscaping Lights For Tourism At Vypin Lighthouse. Submission Date for this Tender is 29-11-2023. Landscape Tenders in Ernakulam Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Annexure-I: Paver Removal Works for Cable Trenching and Foundation for Streetlights - Civil Works |
| 2 | Paver Removal Works |
| 3 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. (Paver Block Removal from pathways for UG Cable trenching) |
| 4 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge (Dismantling of PCC/RCC beneath the paver block) |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (Excavation of earth for construction of Cable trench) All kinds of soil |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : (Plain Cement Concrete for base foundation of the trench including labour and materials) 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).(Re-laying of Paver Block in Cable Trenches after UG Cable laying) |
| 8 | Streetlight, Landscaping Luminaries Pole errection work |
| 9 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (Excavation of earth for construction of Streetlight pole foundation) All kinds of soil (for 19 Nos. of Normal Streetlight Heritage type Streetlight) |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (Excavation of earth for construction of Streetlight pole foundation) All kinds of soil All kinds of soil (for 32Nos. of Bollard light) |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level: (Plain Cement Concrete for base foundation of the trench including labour and materials)1:4:8 (1 Cement: 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size (foundation for 19 Nos. of Normal Streetlight & Heritage type Streetlight) |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level: (Plain Cement Concrete for base foundation of the trench including labour and materials) 1:4:8 (1 Cement: 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size (foundation for 32Nos. of Bollard light) |
| 13 | Brick work with common burnt clay bricks of class designation 7.5 in mud mortar (for 19 Nos. of Normal Streetlight, Heritage type Streetlight & 32Nos. of Bollard light) |
| 14 | 15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough side of single or half brick wall. (For 19 Nos. of Normal Streetlight Heritage type Streetlight & 32Nos. of Bollard light) 5 sides each |
| 15 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer (for 19 Nos. of Normal Streetlight, Heritage type Streetlight & 32Nos. of Bollard light) |
| 16 | Wall painting with Exterior emulsion paint of approved brand and manufacture to give an even shade Two coats on new work (for 19 Nos. of Normal Streetlight Heritage type Streetlight32Nos. of Bollard light) |
| 17 | Annexure-II: Provision of Streetlights and Landscaping Lights at Vypin Lighthouse - Electrical Works |
| 18 | Laying of UG Cable in Cable Trays and Cable markers |
| 19 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling/surface with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness |
| 20 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness |
| 21 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm |
| 22 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 23 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm |
| 24 | Supplying and making cable route marker with cement concrete 1:2:4 (1 cement: 2 coarse sands: 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. |
| 25 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 26 | Provision of Electrical Switch Gear and Earthing |
| 27 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12-way, Double door |
| 28 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A |
| 29 | Supplying and fixing 5A to 32A rating, 240/415V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6A – 11Nos., 16A – 3No. |
| 30 | Supplying and fixing 5A to 32A rating, 240/415V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole 10A – 2Nos. |
| 31 | Earthing with G.I. earth pipe 4.5m long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 32 | Electricalfittings |
| 33 | Supply of Outdoor LED Street Lighting Luminaries, 30W LED, Havells Endura Sundown/Luker LSTE30/Philips BRP042 26W or equivalent reputed make and model as required |
| 34 | Outdoor IP66 Wall Mounting Luminaries, decorative rectangular shaped wall recessed Luminaire with SMD LED as light source (7W LED) for Gate Lighting, Havells Radiant LED Step Light or equivalent model and make as required |
| 35 | Outdoor IP65 Post Top Luminaries, aesthetically designed with symmetrical light distribution, spun aluminium landscape Luminaire with high power LEDs as light source (15W LED) for Compound Wall Lighting, of Havells Rubymini or equivalent reputed make as required |
| 36 | Landscape Lighting Luminaries, IP65, Bollard type, 0.9m, aesthetically designed aluminium landscape Luminaire for diffused lighting with high power LED as light source (8W LED) for Pathway lighting, Havells Bamboo or equivalent model and make as required |
| 37 | Supply of Outdoor LED Street Lighting Luminaries, 30W LED, with Cast iron pole of 2.4m reputed make and model as required |
| 38 | Supply of Outdoor LED Spike Light / Flood Light Luminaries, IP 66/67 15W LED, with required color (White, Red, Green, Blue) of Havells Havells Lycus Spike Light / Flood Light or equivalent reputed make and model as required for fountain |
| 39 | Fabrication of Street light and Garden Light Poles and Accessories |
| 40 | 3” dia GI C Class Pipe, Tata/Jindal make (3m) length for Streetlight Poles threaded at both sides [one length pipe = 6m] |
| 41 | 8mm thick MS Plate of size 450x450mm (approx. 15Kg each) for Base plate of Streetlight Poles including gas cutting charges in required size(48Nos. Of poles) |
| 42 | Fabrication of Streetlight Poles by welding MS base plate to non-threaded end of 3” GI pipe with 3” dia Hot dip galvanised MS plain Slip on flanges |
| 43 | 3” dia Hot dip galvanised MS plain Slip on flanges |
| 44 | 3”x 2” GI C Class Threaded Reducer Socket for Streetlight Poles |
| 45 | 2” dia GI C Class Pipe, Tata/Jindal/Reputed make (1m) length for Bend Pipes of Streetlight Poles [one length pipe = 6m] |
| 46 | Fabrication of Bend Pipe by threading using lathe work 2” dia GI pipe and pipe bending |
| 47 | SMC Pole mounted Junction Box with side hinged door, IP55, Sintex make GSJB 2014 |
| 48 | Fabrication of GI Half Clamps for the Sintex JBs inclusive of material and labour charges |
| 49 | 30A Bakelite/16A Porcelain Type Kit Kat Fuse Unit/ 6A MCB |
| 50 | 30A Bakelite Neutral Link |
| 51 | 30A 6way Closed Bakelite type Terminal Connector for each JB |
| 52 | Supply of Un-armoured, 3Core x 1.5 sq.mm, All Copper Conductor - Solid / Stranded Non-Compacted Circular, HR PVC/ XLPE Insulation, conforming to standards: as per IS 1554 Part-1&2 & IS 7098 Part-1&2, reputed make as required. (For each Streetlight 5m x 12Nos.) |
| 53 | 3"" dia GI B Class Pipe, Tata/Jindal make for UG Cable crossover at pathways [one length pipe = 6m] |
| 54 | Plexo3 boxes for DB, DX3,8 Module Conform to EN 60439-3, Weatherproof cabinets - IP 65 - IK 09 – Class II 6019 98 |
| 55 | 16/6A, Socket, 3pin Combine, Modular type (2M), with Indicator DP Switch, Modular type (2M), 32A and with 4Module Plate, 4Module PVC Box, Legrand make, Model MyLinc for Lawn Mover. |
| 56 | Supply of UG Cable, 2Core x 2.5 sq.mm, Armoured, All Copper Conductor - Solid / Stranded Non Compacted Circular, HR PVC/ XLPE Insulation, conforming to standards: as per IS 1554 Part-1&2 & IS 7098 Part-1&2, , Finolex / Havells/ATC make or reputed make as required for Outgoing Mains to circuits of Streetlight (pathway), one circuit of Gate Light & Compound Light and one circuit of 16A socket. |
| 57 | Supply of UG Cable, 2Core x 4 sq.mm, Armoured, All Copper Conductor - Solid / Stranded Non Compacted Circular, HR PVC/ XLPE Insulation, conforming to standards: as per IS 1554 Part-1&2 & IS 7098 Part-1&2, Finolex / Havells/ATC make or reputed make as required for Outgoing Mains to circuits of Fountain Motor and floodlight. |
| 58 | Labour Charges for wiring and cable terminations all type lighting luminaries and, 16A socket, MCB DB & JB fixing work etc., |
| 59 | Miscellaneous items such as cable glands, cutting blades, 2” PVC pipes and bends for cable entry, screws, nylon grip plugs, masonry bits, Cable ties, end caps, etc., |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
