Tender For Construction Of Grampanchayat Office At Dumbarwadi Tal Junnar Dist Pune (Mssmzppune)
Tender Value
12.66 Lakhs
Estimated cost
Bid Submission
20 Nov 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
junnar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Grampanchayat Office At Dumbarwadi Tal Junnar Dist Pune ( Mssmzppune )
BOQ
| Sl. No. | Item Description |
| 1 | ITEM NO 1 : Excavation for foundation in earth,soil of all types,sand gravel and soft murum,including removing the excavated material up to a distance of 50 m.beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming , watering including shoring and strutting etc. complete (lift upto 1.5 m ) By Mechanical Means ... (IN21-02, PgNo 153) |
| 2 | ITEM NO 2 : Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering , preparing the bed for the foundation and nacessary back filling , ramming, watering including shoring and strutting etc. complete(lift upto 1.50 m ) By Mechanical Means ... (INo21-06, PgNo 153) |
| 3 | ITEM NO 3 : Excavation for foundation in hard rock by chiseling, wedging, line driling, etc. including trimming and leveling the bed, removing the excavated material upto distance of 50 metres beyond the building area stackingas directed, dewatering and back filing with available earth/ murum watering, ramming etc. complete (lift upto 1.50 m ) By Mechanical Means ... (INo21-20, PgNo 155) |
| 4 | ITEM NO 4 :Providing dry/trap/granite/quartizite/gneiss rubble stone soling 15 cm. to 20 cm. thick including hand packing and compacting etc complete (INo21-38, Page No 157) |
| 5 | ITEM NO 5 : Providing and laying Castin situ/Ready mixcement concret in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering , formwork, laying/pumping compacting , roughening them if special finish is to be provided , finishing if required and curing complete. with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer ) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed ) ( (INo24-01 NS, PgNo 175) |
| 6 | ITEM NO 6 :Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C .work in foundations like raft strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork laying/pumpingcover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc complete with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate ( Crushed sand VSI Grade finely washed ) (INo25-11 NS, PgNo 178) |
| 7 | ITEM NO 7 : Providing and laying Cast in situ/Ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C .columns as per detailed designs and drawing or as directed including steel centering, formwork ,cover blocks laying /pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc. complete. .With fine aggregate (Crushed sand VSI Grade finely washed ) (INo25-31 NS, PgNo 179) |
| 8 | ITEM NO 8 : Providing and laying Castin situ/Ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C beams and lintels as per detailed designs and drawing or as directed including steel centering, formwork ,cover blocks , laying/pumping , compactionand roughening the surfaces if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade finely washed )(INo25-50 NS, PgNo 181) |
| 9 | ITEM NO 9 : Providing and laying Castin situ/Ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. Waist slab and steps of staircasesas per detailed designs and drawings or as directedincluding steel centering, formwork, steel props, laying/pumping compaction finishing uneven and honeycombed surface with C.M. 1:3 of sufficent minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, ( Excluding einforcement including cover block ) ( Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.)with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade finely washed )(INo26-25 NS, PgNo 185) |
| 10 | ITEM NO 10 : Providing and laying Castin situ/Ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawingincluding steel centering, formwork, cover blocks laying/pumping compaction finishing the formed surfaces with cement mortar 1:3 of sufficent minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, ( Excluding reinforcement and structural steel ) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed ) ..(INo25-70 NS, PgNo 182) |
| 11 | ITEM NO 11 : Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C chajja as per detailed design and drawings including Steel centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed ) (INo26-05 NS, PgNo 184) |
| 12 | ITEM NO 12 : Providing second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6in foundation and plinth of inner walls/in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete...((INo 27-01, PgNo 197) |
| 13 | ITEM NO 13 :Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking, out joints, watering and scaffolding etc. Complete…(INo27-05, PgNo 197) |
| 14 | ITEM NO14 : Filling in plinth and floors with contractors material /brought from outside and approved by Engineer incharge in layers of 15 cm. to 20 cm. including watering and compaction etc compelte(INo21-37, Pg No 157) |
| 15 | ITEM NO 15 :Providing and fixing frame with/without ventilator of size as specified with Country non teak wood for doors and window including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete… (INo39-02, PaNo 245) |
| 16 | ITEM NO 16 :Providing and fixing green marble of 18 to 20 mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary , curing, etc. complete…(INo33-48, PgNo 218) |
| 17 | ITEM NO 17: Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and paintiing with one coat of anticorrosive paint and two coats of oil painting complete…..(INo40-02, PgNo 264) |
| 18 | ITEM NO 18 :Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete....(INo39-09, PaNo 246) |
| 19 | ITEM NO 19 :Providing and fixing in position TMT- FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footing ,foundations ,slabs, beams columns, canopies, staircase , newels, chajjas, lintels pardis ,copings, fins, arches etc. as per detailed designs ,drawings and schedules. including cutting , bending , hooking the bars, binding with wires or tack welding and supporting as required complete...(INo26-33 , PgNo 188) |
| 20 | ITEM NO 20 : Providingandfixingboarddisplayinginformation,suchas \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18gauge (1.25mm)thick mild steelsheetpaintedwithonecoatofZincchromatestoving primer andtwocoats ofenamelpaintonfrontside andgrey stoveenamelonbacksideandborder/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles ofsize 35mmx35mmx3mmdulypaintedincludingTwo M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m longpaintedwithalternateblackandwhitebandsof25cm widthincludingallfixturesetc.andfixingtheboardsin1:4:8 concreteblockofsize60cmx60cmx75cmincluding, excavation,refilling,transportation,andlabouretccomplete. Spec. No. As directed by Engineer in Charge ( INo6-36 , PgNo. 60) |
| 21 | ITEM NO 21 :Royalty charges for HARD MURUM. Rate = Royalty + surcharge (2%) ( 211.95 + 4.23=216.18, Per Cum) … (INo1-A, PgNo 1) |
| 22 | ITEM NO 22 : Royalty charges for RUBBLE. Rate = Royalty + surcharge (2%) ( 211.95 + 4.23=216.18, Per Cum) … (INo1-J, PgNo 1) |
| 23 | ITEM NO 23 :CONCRETE Compressive Strength OF C.C. Cube (Set of 3cubes )…(INo19-VQC, PgNo 584) |
| 24 | ITEM NO 24 :BRICKS water absorption ( Set of 5 Bricks) Compressive stregth ( Set of 5 Bricks) Efflorescence ( Set of 5 Bricks)(INo13 VQC, Pg No 584) |
| 25 | ITEM NO 25 :MORTAR Compressive Strength(Set of 3cubes )…(INo27-VQC, PgNo 585) |
| 26 | ITEM NO 26 :STEEL BAR TESTING Upto 16mm (set of 3 Bars)… (INo72-VQC , PgNo 586) |
AI Tender Summary
Tender Timeline
Nov 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender