Aligarh Development Authrority-ADA has published Fixing 03 High Mast Light (Bachcha Park, Mandir Parisar, Quarter Guard). Submission Date for this Tender is 25-11-2023. Street Lighting Tenders in aligarh Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 20-Nov-2023 | Corrigendum date | Date | 25-11-2023 |
2 | 22-Nov-2023 | Corrigendum | Other | 25-11-2023 |
Sl. No. | Item Description |
1 | S/F of 20 mtr High Mast shaft of approved make with rising system hot dip glavanized inside & out side dip, having pole sheet thickness 4mm. Top dia minimum 150mm, Bottom dia 410 mm base plate 32mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5HP power tool motor, 3 point suspension system with steel wire rope 8mm dia, double drum winch, including making suitable foundation as per manufacture drawing/site reuiment along with foundation bolts, nuts, washers, anchor plates etc complete in all respect. [SOR No. 653/2018] |
2 | S/F of Factory wired integral LED Flood Light luminaires (Philips/Halonix/Havells make) with die cast aluminium housing built with driver set suitable for 170 to 200 watt. Cofirming to IP-66 protection complete in all respect. [CAT-AAA SOR No. 1455/2018] |
3 | S/L of Aluminium Conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 m below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on both sides and on top. On surface the cable run shall be fixed on M.S clamps at of suitable size or as directed by the Engineer-In-Charge complete in all respect.The armouring of the Cable shall be properly connected with the earth conductor by clamps etc. complete all respect as per direction of E/I. 25 SqmmX3.5 Core [PWD SOR No. 501 (i)/2018] |
4 | Supply and burying earth for lighting conductor of 900mm x 900mm x 3mm copper plate vertically with itstop at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I.frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alroundetc. as per directions of Engineer-in-charge complete inall respect.(SOR NO 709/2018) |
5 | S/F of 100Amp 415V metal clad TPN HRC Type switch fuse unit complete with HRC fuse on angel iron bracket complete in all respect CAT-B [SOR No. 328/2018] |
6 | Supply and Wiringof Submain with two nos of2.5 Sqmm FRLSH PVC insulated 1100V Grade single core multistrand Copper Conductor Cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as direction by Engineer-In-Charge.(SOR No.-289/2018) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail