Tender For Repairs And Maintenance To The Pavadi Elementary School In Division No. 41, salem-Tamil Nadu

Tender For Repairs And Maintenance To The Pavadi Elementary School In Division No. 41; 1 Dismantaling The Damaged Brick Work In Cement Mortor Including All Cost Etc Complete. 2 Chipping The Damaged Ceiling Plastering Including All Cost Etc Complete. 3 Dismantaling The Damaged Pressed Tiles & Weathering Course Over Roof Including All Cost And Conveyance Etc ( S.I. No.38B ) 4 Earth Work Excavation For Foundation In Ordinary Soil, Light Black Cotton Sandy Loam And Dry Silt Including Shoring, Strutting, Baling Or Pumping Out Water Wherever Necessary And Refilling The Sides Of Foundation With Excavated Earth In Layers Of 15Cm Thick And Depositing The Surplus Earth At Places As Directed By The Departmental Officers With Initial Lead And Lift 5 Narrow Foundation 6 Open Foundation 7 Plain Cement Concrete 1:4:8 Mix ( One Cement Four M-Sand And Eight Aggregate ) Using 40Mm Size Iss Gauge Hbbg Metal Including Mixing, Laying, Consolidating, Curing, Cost And Conveyance Of All Materials To Site And All Labour Charges Etc., Complete As Per Standard Specification 8 Supplying And Errecting Centering To Sides And Soffits Including Supports And Struttingfor Drainage Sides Andculvert Body Wall Sidesusing M.S Sheets Of Size90cm X 60Cm And B.G 10Stifenedwith Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3Mm For Boardinglaid Over ( Silver Oak Joists ) Of Size 10Cm X 6.50Cm Spread At About 90Cm Including All Labour Charges And Cost And Conveyance Of All Materials To Site Etc. Complete Complying With Standard Specification 9 Forcolumn 10 Grade Beam 11 Reinforced Cement Concrete 1:1½:3 Mix ( One Cement One And Half M-Sand Three Aggregate ) Using 20Mm Iss Gauge Hbbg Metal From The Approved Quarry Including Mixing, Laying, Consolidating, Curing Cost And Conveyance Of All Materials To Site And All Labourcharges Etc., Complete As Per Standard Specification 12 Up Tobasement 13 Above Basement 14 Brick Work In Cement Mortar 1:5 Mix Using Fly Ash Bricks Of 230X110x70mm ( 8 3 / 4 X 41 / 4 X 23 / 4 ) From Approved Quarry Including Cost And Conveyance Of All Materials To Site. Loading And Unloading Charges And Labour Charges For Mixing, Laying And Curing Etc. Complete. Complying With Std. Specifications 15 Supply And Fabrication And Placing In Position Of Tmt Steel Roads To Required Size And Length As Directed By The Departmental Officers Including Cost Of Binding Wire, Cutting, Bending And Tying With Proper Position Etc., Including Cost And Conveyance Of All Materials To Site And All Labour Chargesetc., Complete Complying With Standard Specification 16 Plastering With Cement Mortar 1:5 Mix, 12Mm Thick Including Cost And Conveyance Of All Materials To Site, Loading And Unloading Charges And Labour Charges For Mixing, Laying And Curing Etc. Complete . Complying With Std. Specifications 17 Strucco Plastering 12Mm Thick Using Hbbg Chips Of Size 10Mm And Below Over A Base Plastering With Cement Mortar 1:5 Mix, 12Mm Thick Including Cost And Conveyance Of All Materials To Site, Loading And Unloading Charges And Labour Charges For Mixing, Laying And Curing Etc. Complete . Complying With Std. Specifications 18 Fabricating Supply And Fixing And Position Of Ms Doors With Single Leave. The Door Outer Frame Will Be 40X40x6mm Ms Angle, The Shutter Frame Will Be 35X35x6 Mm, Ms Angle Intermediate Stiffner Will Be 35X35x6 Mm With Cross Stiffner 25X 25X5 Mm Flats Covered With 18 Gauge M.S. Sheet With Necessary Hinges, Tower Bolts, Aldrop Length 30Mm And Hold Fast Etc., Complete With One Coat Red Oxideprimer. 19 Fabricating Supply And Fixing And Position Of Ms Doors With Double Leave Made Out Of 18 Gauge M.S. Sheet, Outer Frame 35X35x5mm Angle, Inner Frame 25X25x5mm Angle, Cross Stiffner With Ms Flat 25X5mm, Altrop Tower Bolts 2 Nos. Two Handles And Six Holdfasts Completed Welded And Rivetted And One Coat Of Red Oxide Painting Including Cost Of All Materials And Labour Etc., Complete 20 Manufacturing, Supplying & Fixing In Position Steel Windows Of Ms Sheet 20 Gauge Thick With Openable Shutter Frame And Shutter Frame Made Out Of Steel Section Confirming To Is 7452 / 1990.The Outer Frames Of Windows Made Ofz Section ( F7d ) Of Size 25 X 20 X 3 Mm Confirming To Is7452 / 1992 Mullions Are Made Of ( F4b ) Of Section Size 46X25x3mm Confirming To Is7452 / 1990.The Shutters Are Individual And Each Of Them Can Be Operated Separately. Sash Bars Are Made Of TSection ( T2 ) Of Size 25X22x3m, 2Nos Of Sturdy Hinges And One Numbers Of Handle Cum Slatch Of Special Type Are Fixedfor With Openable Shutter. Suitable Opening Is Left For Its Any Operation. One Number Of Adjustable Stay With Locking Bracketof Sufficient Length Shall Be Provided For Each Shutter 4 Nos. Of 40X40x3mm Anngle Hold Fast 230Mm Length Are Welded To The Outer Frame At Appropriate Point.M.S Square Bars Of 12Mm Size Is Welded To The Inner Face Of The Window At Equal Intervals Not Excluding 10Cm Spacings , 20Gauge Ms Sheet Is Used For Covering The Shutter. Grill Members Are Painted With One Coat Of Primer. 21 Collection, Supply And Filling Ofwell Gravel From Approved Quarry To Work Site And Stocking To The Departmental Gauge For Premeasurement As Directed By The Departmental Engineer, To Required Depth Not More Than 15Cm Depth Including Cost Andconveyance Ofgravel To Site And All Labour Charges For Filling Etc., Complete Complying With Standard Specification 22 Weathering Course With Concrete Broken Brick Jelly 20Mm Size In Pure Slaked Lime ( No Sand To Be Used ) Over Rcc Roof Slab The Proportion Of Broken Brick Jelly To Lime Being 32:12.5 Well Beaten With Wooden Beaters Giving Required Slopes And Thicknessetc., Complete 23 Finishing The Top With Solar Reflectiv Ceramic Tiles Of Size 300 Mm X 300Mm X 7Mm Size Laid In Cm 1:3 Mix Mixed With Water Proofing Compound As Per Indian Standard 2% By Weight Of Cement Used And Pointed With The Same Mortar Etc., Complete 24 Special Ceiling Plastering For Rc Slabs And Beams With Cement Mortar 1:3 Mix 10Mm Thick Including Cost And Conveyance Of All Materials To Site, Loading And Unloading Charges And Labour Charges For Mixing, Laying And Curing Etc. Complete . Complying With Std. Specifications 25 Plastering With Cement Mortar 1:3 Mix, 20Mm Thick Including Cost And Conveyance Of All Materials To Site, Loading And Unloading Charges And Labour Charges For Mixing, Laying And Curing Etc. Complete . Complying With Std. Specifications 26 Flooring With First Quality Plain Ceramic Tiles Of Approved Colour And Quality Of Size 305Mm X 305Mm X 6Mm Laid In Cement Mortar 1:3 Mix, 20Mm Thick And Pointing With The Same Mortar Etc., Completely And Finish Very Neatly 27 Dadooing Walls With Ceramic Tiles Of Size 20Cm X 20Cm X 6Mm First Quality Design Tiles Of All Colours Laid In Cement Mortar 1:2 Mix, 10Mm Thick And Pointing With White Cement Using 0.40 Kg / 1M2 Including Finishing The Joint And Pointing Flush With Tile Surface Etc., Complete 28 Paving The Floor With Best Approved Quality Fine Polished Tandon Shagbad Green Stone Slab Of Size Below 2 X 220Mm Thick Laid Over A Cement Mortar 1:3 Mix, Fixing The Slab In True Tight Angles With Minimum Possible Width Of Joints And Polishing The Joints With Cement Mortar 1:3 Mix And Polishing With Floor Polisher To A High Degree To Finish And Curing Etc. Complete As Directed By Depat. Officers. 29 Supplying And Fixing Of Cudappa Slab Of 20 / 30 / 40 / 50Mm Thick For Cup Board Including Cost Of Materials And Labour Etc Complete 30 Painting Two Coats With Approved Cement Paint Over Cement Plastered Surface Ceiling And Other New Surface Includingcleaningprepering Thesurfaceandcuringetc., Complete 31 Painting Two Coats With Ready Mixed Plastic Emulsion Paint Of 1St Class Quality And Of Approved Color Over A Priming Coat Including Through Scraping Clean Removal Of Dirt Etc., Complete And Including Necessary Plaster Of Paris Putty Wherever Required 32 Painting Two Coats With Best Synthetic Enamel Paint Of Approved Colour For New Iron Works The Rate Is Inclusive Of All Materials, Brushes And Scaffolding Charges Etc., Complete Complying With Standard Specification ( Paint Should Be Got Approved By The Departmental Engineer Befor Use On Work. 33 Painting Two Coats With Best Synthetic Enamel Paint Of Approved Colour For Old Iron Works The Rate Is Inclusive Of All Materials, Brushes And Scaffolding Charges Etc., Complete Complying With Standard Specification ( Paint Should Be Got Approved By The Departmental Engineer Befor Use On Work. 34 Supplying, Fabrication And Fixing Of Ornamental Grill For Garidar Andincluding Cost Of Convayance Of All Materials And All Labour Charge For Cutting, Fabricating, Walding Etc, Complete ( Including One Coat Of Primer ) And Fixing In Proper Position With Concrete Packing By The Direction Of Departmental Engineers Instruction Etc, Complete And As Per Standard Specification. 35 Supplying And Laying Rubberised Interlocking Paver Blockm40 Grade Providing And Laying Of63mmthick High Strength Type Conforming Is 15658-2006 Of Rubberized Interlocking Paver Lock In Size Of Minimum Compressive Strength Of 40N / Mm2 In Uniform Shape Of Approved Make To Be Laid In Flurring Bone Pattern With Stone Dust Cushion Below The Uniform Shap Of Approvednon Skitting Surface In The Top And The Rate Including Levelling The Base Preparation Ofpavers As Sub Base, Stone Dust Cushion 150Mm Thick Layingout Of Pavement Cut The Pieces To Fix The Edge Vibring The Pavers, Sweeping Tranporting Loading Unloading Of Laying Paver Block As Per Standard Specification, . 36 Wiring With 2 X 1.5 Sq.Mm ( 22 / 0.3 ) Pvc Insulated Sc.Unsheathed Cu.Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Celiling With Pvc Accessories And With Tw Switch Box And5 A.Ft Switch Withinflush With Wall, Covered With Hylum Sheet Of 3Mm With Painting Of Suitable Colourfor Open Pvc Light Point. ( Sd.No.21 ) 37 Wiring With 2 X 1.5 Sq.Mm ( 22 / 0.3 ) Pvc Insulated Sc.Unsheathed Cu.Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Celiling With Pvc Accessories And With Tw Switch Box And 5 A.Ft Switch Withinflush With Wall, Covered With Hylum Sheet Of 3Mm With Painting Of Suitable Colour For Open Pvc Fan Point. ( Sd.No.21 ) 38 Supply And Fixing Of 5A 3-Pin And 2 Pin Combined Flush Type Wall Socket With 5A Flush Type Switch On Suitable T.W. Box Sd ( 10 ) 39 Wiring With 2 X 1.5Sq.Mm ( 22 / 0.3 ) Pvc Insulated Unsheathed Sc.Cu.Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With 150Mm X 100Mm X 113Mm Tw Switch Box With 3Mm Thick Hylem Sheet For 15A 3 Pin Non Inter Locking Cs Plug With Painting Ofsuitable Colour With Continous Earth Wire Connection Of 14 Swg Tc Wire For Open Pvcpower Plug Pointetc, Complete. ( Sd.No.39 ) 40 Supply And Fixing Of 1200Mm 48’ Ac Ceiling Fan Complete With Regulator With 300Mm Draw Down Rod On The Existing Clamp Etc., ( Sd.No.106 ) 41 Supply And Fixing Of 4 18W Crystal Glass Led Tube Light Fitting Complete With T.W. Round Blocks On Wall Or Ceiling With Flu Tube With Pvc Unsheathed Leads From Terminal To The Fitting. 42 Supply And Fixing Ofwater Closetnew Glassed Earthen Ware T If 23” Oriya Type Of Approved Quality With ”P” Or “S” Trap With Sand Cushion Flooring And All-Round The Closet Using 40Mm Broken Brick Jelly In Cement Concrete 1:2:5 Of 4” Thick And Plastering Withcm1:3 20Mm Thick Using River Sand Including Fixing The Water Closet In Position And Giving Necessaryconnection To Ci Stakes Etc., Complete 43 Iwc 44 Ewc ( 12.5 Lit Capacity ) 45 Supply And Fixing Ofthe Following Pipes And Specials Etc., Complete. 46 110Mm Dia Pvc Pipe 47 110Mm Dia Pvc Bend 48 110Mm Dia Pvc Clamp

Refer document

INR 25000.0 /-

INR 25 Lakhs /-

Name of Work:REPAIRS AND MAINTENANCETO THE PAVADI ELEMENTARY SCHOOL IN DIVISION NO. 41

Sl. No.	Item Description
1	Dismantaling the Damaged Brick work in Cement Mortor including all cost etc complete.
2	Chipping the Damaged Ceiling Plastering including all cost etc complete.
3	Dismantaling the Damaged Pressed tiles & Weathering Course over Roof including all cost and conveyance etc (S.I. No.38B)
4	Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift
5	Narrow Foundation
6	Open Foundation
7	Plain cement concrete 1:4:8 mix (One cement four m-sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing,laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
8	Supplying and errecting centering to sides and soffits including supports and struttingfor drainage sides andculvert body wall sidesusing M.S Sheets of size90cm x 60cm and B.G 10stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete Complying with Standard Specification
9	forColumn
10	Grade Beam
11	Reinforced cement concrete 1:1½:3 mix (One cement one and half m-sand three aggregate) using 20mm ISS gauge HBBG metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labourcharges etc., complete as per standard specification
12	Up toBasement
13	Above Basement
14	Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications
15	Supply and fabrication and placing in position of TMT steel roads to required size and length as directed by the departmental officers including cost of binding wire, cutting, bending and tying with proper position etc., including cost and conveyance of all materials to site and all labour chargesetc., complete Complying with Standard Specification
16	Plastering with cement mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications
17	Strucco plastering 12mm thick using HBBG chips of size 10mm and below over a base plastering with cement mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications
18	Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer.
19	Fabricating Supply and fixing and position of MS doors with double leave made out of 18 gauge M.S. sheet, outer frame 35x35x5mm angle, inner frame 25x25x5mm angle, cross stiffner with MS flat 25x5mm, altrop tower bolts 2 Nos. two handles and six holdfasts completed welded and rivetted and one coat of red oxide painting including cost of all materials and labour etc., complete
20	Manufacturing,supplying & fixing in position Steel windows of MS sheet 20 gauge thick with openable shutter frame and shutter frame made out of steel section confirming to IS 7452/ 1990.The outer frames of windows made ofZ section (F7D) of size 25 x 20 x 3 mm confirming to IS7452/1992 mullions are made of (F4B) of section size 46x25x3mm confirming to IS7452/1990.The shutters are individual and each of them can be operated separately. Sash bars are made of "T"section (T2) of size 25x22x3m, 2nos of sturdy hinges and one numbers of handle cum slatch of special type are fixedfor with openable shutter. Suitable opening is left for its any operation. One number of adjustable stay with locking bracketof sufficient length shall be provided for each shutter 4 nos. of 40x40x3mm anngle hold fast 230mm length are welded to the outer frame at appropriate point.M.S square bars of 12mm size is welded to the inner face of the window at equal intervals not excluding 10cm spacings ,20gauge MS sheet is used for covering the shutter. Grill members are painted with one coat of primer.
21	Collection,supply and filling ofWell gravel from approved quarry to work site and stocking to the Departmental gauge for premeasurement as directed by the Departmental Engineer, to required depth not more than 15cm depth including cost andConveyance ofgravel to site and all labour charges for filling etc., Complete complying with Standard Specification
22	Weathering course with concrete broken brick jelly 20mm size in pure slaked lime (no sand to be used) over RCC roof slab the proportion of broken brick jelly to lime being 32:12.5 well beaten with wooden beaters giving required slopes and thicknessetc., complete
23	Finishing the top with Solar Reflectiv Ceramic Tiles of size 300 mm x 300mm x 7mm size laid in cm 1:3 mix mixed with water proofing compound as per Indian standard 2% by weight of cement used and pointed with the same mortar etc., complete
24	Special Ceiling Plastering for RC slabs and beams with cement mortar 1:3 mix 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications
25	Plastering with cement mortar 1:3 mix, 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications
26	Flooring with first quality plain ceramic tiles of approved Colour and quality of size 305mm x 305mm x 6mm laid in cement mortar 1:3 mix, 20mm thick and pointing with the same mortar etc., completely and finish very neatly
27	Dadooing walls with Ceramic tiles of size 20cm x 20cm x 6mm first quality design tiles of all colours laid in cement mortar 1:2 mix, 10mm thick and pointing with white cement using 0.40 kg/1m2 including finishing the joint and pointing flush with tile surface etc., complete
28	Paving the floor with best approved quality fine polished Tandon Shagbad green stone slab of size below 2" x 2"20mm thick laid over a cement mortar 1:3 mix, fixing the slab in true tight angles with minimum possible width of joints and polishing the joints with cement mortar 1:3 mix and polishing with floor polisher to a high degree to finish and curing etc. complete as directed by depat. officers.
29	Supplying and fixing of Cudappa slab of 20/30/40/50mm thick for Cup board including cost of materials and labour etc complete
30	Painting two coats with approved cement paint over cement plastered surface ceiling and other new surface includingcleaningprepering thesurfaceandcuringetc.,complete
31	Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required
32	Painting two coats with best synthetic enamel paint of approved Colour for new iron works the rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification(paint should be got approved by the Departmental Engineer befor use on work.
33	Painting two coats with best synthetic enamel paint of approved Colour for Old iron works the rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification(paint should be got approved by the Departmental Engineer befor use on work.
34	Supplying, fabrication and fixing of Ornamental grill for Garidar andIncluding cost of convayance of all materials and all labour charge for cutting, fabricating, walding etc, complete (including one coat of primer) and fixing in proper position with concrete packing by the direction of departmental engineers instruction etc, complete and as per standard specification.
35	Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of63mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.
36	Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC.unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and celiling with PVC accessories and with TW switch box and5 A.FT switch withinflush with wall, covered with hylum sheet of 3mm with painting of suitable colourfor open PVC light point. (SD.No.21)
37	Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC.unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and celiling with PVC accessories and with TW switch box and 5 A.FT switch withinflush with wall, covered with hylum sheet of 3mm with painting of suitable colour for open PVC fan point. (SD.No.21)
38	Supply and fixing of 5A 3-Pin and 2 Pin combined flush type wall Socket with 5A flush type Switch on Suitable T.W. box SD (10)
39	Wiring with 2 x 1.5sq.mm(22/0.3) PVC insulated unsheathed Sc.Cu.conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking CS plug with painting ofsuitable colour with continous earth wire connection of 14 SWG TC wire for open PVCPower plug pointetc, complete. (SD.NO.39)
40	Supply and fixing of 1200mm 48’ AC ceiling fan complete with regulator with 300mm draw down rod on the existing clamp etc., (SD.No.106)
41	Supply and fixing of 4" 18W Crystal Glass LED Tube Light fitting complete with T.W. round blocks on wall or ceiling with flu tube with PVC unsheathed leads from terminal to the fitting.
42	Supply and fixing ofwater closetnew glassed earthen ware t if 23” oriya type of approved quality with ”p” or “s” trap with sand cushion flooring and all-round the closet using 40mm broken brick jelly in cement concrete 1:2:5 of 4” thick and plastering withcm1:3 20mm thick using river sand including fixing the water closet in position and giving necessaryconnection to CI stakes etc., complete
43	IWC
44	EWC(12.5 lit Capacity)
45	Supply and Fixing ofthe Following Pipes and Specials etc., Complete.
46	110mm Dia PVC Pipe
47	110mm Dia PVC Bend
48	110mm Dia PVC Clamp