Power Boards / Undertakings / PSU Closing in 0 days TDR #40645651

Tender For Providing Additional Air Diffusers And Return Air Grills In Air - Conditioning Main Air Duct And Fabrication And Erection Of New Duct Connectedwithexisting Mainairductforfsssdcsroominunit-Ii And Generator Relay Panel In Unit-Ii & Unit-Iii , Rem

Issued by Boards / Undertakings / PSU · mettur, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Nov 2023
0 days left
EMD
2700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
mettur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Providing Additional Air Diffusers And Return Air Grills In Air - Conditioning Main Air Duct And Fabrication And Erection Of New Duct Connectedwithexisting Mainairductforfsssdcsroominunit-Ii And Generator Relay Panel In Unit-Ii & Unit-Iii , Removing The Damaged Portion Of Woolmatters And Hessian Cloth Roofinsulation Andmountingproperly In The Servicebuilding Ahu Room.

BOQ

Name ofWork:MTPS-I - Mill Plant - A.C Plant – Providing additional air diffusers and return air grills in air - conditioning main air duct and fabrication and erection of new duct connectedwithexisting mainairductforFSSSDCSroominUnit-II and Generator relay panel in Unit-II & Unit-III , removing the damaged portion of woolmatters and hessian cloth roofinsulation andmountingproperly in the servicebuilding AHU room.
Sl. No. Item Description
1Charges for fabrication of air duct using 1mm GI Sheet of size0.9mx0.8mfor providing new air diffusers and return air grills in air-conditioning main air duct for FSSS DCSroom in Unit-II and Generator relay panel in Unit-II & Unit-III (1 mm thick GI Sheet will be contractor scope). This work involves Sheet cutting, bending, folding’s, drilling holes in the flanges.
2Charges for fabrication of spool piece for fixing Supply air diffuser size dia. 580mm in newly providing ducts.
3Charges for dismantling the perforated particle board ceiling carefullyfor reuse the same location,removing the main duct insulation including lead lift etc., complete.
4Charges foropening the bottom portion of themain duct for connect the down comer spool piece with aluminumbeading for fixing the diffuser between the main duct and the perforatedparticle board false ceiling.
5Charges for erection the newly fabricated duct with necessary fastening arrangement to connect with already existing main duct for FSSS DCSroom in Unit-II and Generator relay panel in Unit-II & Unit-III in appropriate manner.
6Charges for fixing Supply air diffuser size dia. 580mm directly in the down comer spool piece with aluminumbeading for fixing the diffuser between the main duct and the perforatedparticle board false ceiling for conditioning air circulation to desired space in the appropriate manner.
7Charges for removing diffusers and providing dummy in the existing main air duct and supporting the ‘with angle size 35 x 35 x 5 mm of length two metre on the existing structure to support with MS rod 8mm & anchor bolt 10 mm as required in the newly providing ducts.( M.S Angle, rod will be contractor scope).
8Charges for insulation of supply air duct with 50mmthermo coleslabafter applying coal tar paint or bituminous compound over entire area of new fabricated duct and then surrounded with aluminum foilsheet . (thermocoleslab ,bituminous compound/ coal tar paint aluminum foilsheetwill be contractor scope
9Re-fixingthe existing perforated particle boardas fall ceiling with anodized aluminumgrid dismantled from Unit control Board room –II & III lead lift etc., complete
10Charges for removing the damaged wool matters,and hessian cloth insulation in theceiling roof of the service building AHU room and arresting good condition roof insulation with fasteners byproviding scaffolding arrangements
111 mm GI Sheet
12Air diffuser
13MS Angle 35 x 35 x 5 mm(31 Kg) & MS Civil rod 8 mm(10 Kg)
1450mm Thick thermo cole
15Aluminum foil sheet (0.2mm thick)
163/8” x 1” coach screw for connecting flanges
173mm Asbestos rope
18Coal tar paint
19Charges for consumables and T & Ps

AI Tender Summary

OUR REF NO 40645651
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 28-11-2023
Authority
Authority Name Tamil Nadu Generation And Distribution Corporation Limited
Work Description Providing Additional Air Diffusers And Return Air Grills In Air - Conditioning Main Air Duct And Fabrication And Erection Of New Duct Connectedwithexisting Mainairductforfsssdcsroominunit-Ii And Generator Relay Panel In Unit-Ii & Unit-Iii , Removing The Damaged Portion Of Woolmatters And Hessian Cloth Roofinsulation Andmountingproperly In The Servicebuilding Ahu Room.
Basic Detail
Tender No CE / MTPS-I / SE/ M-I /MP/OT.334/2023-24.
Bidding Type Tender
Location
City mettur
State Tamil Nadu
Key Dates
Publish Date 14 Nov 2023
Submission Date 28 Nov 2023
Open Date 29 Nov 2023
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 2700
Exemption Not Available
Document List
c518fc50-9c41-47a9-9ebc-42d5cb94ae8c.html
BOQ_463258.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 29, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

c518fc50-9c41-47a9-9ebc-42d5cb94ae8c.html

xls

BOQ_463258.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender