Tender For External Electrical Works On First Floor And Second Floor In Bida Mart, Bhadohi
Tender Value
24.70 Lakhs
Estimated cost
Bid Submission
25 Nov 2023
0 days left
EMD
2.47 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhadohi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For External Electrical Works On First Floor And Second Floor In Bida Mart, Bhadohi
BOQ
| Sl. No. | Item Description |
| 1 | Supply ,Erection, Testing & Commissioning of factory fabricated & wired metal clad dust and vermin proof floor mounting, MS Channel Base with bottom and top cable entries Electrical control panel TPN MCCB\"s ( Four Pole 36 KA with thermal magnetic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital metering system for phase to phase voltage and single phase voltage, current and other parameters ( KVA, PF, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The board shall have suitable cpacity electrilytic aluminium busbar as per IS8623 insulated with heat shrink and mounted in non hygroscopic supports such as CMC/DMC support with diteachable side covers and shall be syitable foe extension on te sides. The MCCB\"s shall be suitable cable end boxes compression glands and indicating lamps on incoming etc. The board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm.(Switchgear L&T, ABB, Siemens, Schneider) |
| 2 | FLOOR PANEL -3 Incoming- 630A, 4P, MCCB = 01 No Bus Bar- 630A, 415V, 50 Hz TPN Aluminium BusbarOutgoing- (i) 400 A, TP, MCCB = 01 No(ii) making suitable provisions for 25 nos of outgoing connection for individual shop from outgoing busbar, complete in all respect |
| 3 | SUB FLOOR PANEL -3 Incoming-400A, 4P, MCCB = 01 No Bus Bar- 400A, 415V, 50 Hz TPN Aluminium BusbarOutgoing-making suitable provisions for 35 nos of outgoing connection for individual shop from outgoing busbar, complete in all respect |
| 4 | FLOOR PANEL -4 Incoming-400A, 4P, MCCB = 01 No Bus Bar- 400A, 415V, 50 Hz TPN Aluminium Busbar Outgoing- making suitable provisions for 10 nos of outgoing connection for individual shop from outgoing busbar, complete in all respect |
| 5 | Supply and wiring of submains with 4 nos. 6.00 sq mm & with 2 no earth wire of 4.0 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour andT & P etc. required for proper completion of the work as directed by Engineer in charge. ( cable make- Havells, Polycab, Finolex ) |
| 6 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 7 | 240 sq. mm 3-1/2 core |
| 8 | 300 sq. mm 3-1/2 core |
| 9 | 16 sq. mm 4 core |
| 10 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge. |
| 11 | 240 sq. mm 3-1/2 core |
| 12 | 300 sq. mm 3-1/2 core |
| 13 | 16 sq. mm 4 core |
| 14 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. |
| 15 | 240 sq mm |
| 16 | 300 sqmm |
| 17 | 16 sqmm |
| 18 | Supply and fixing ofrecessmounting round 15 to 18 Watt LED Down Lighter having Powder coateddie cast aluminium housing withheat sink, diffuser/ Reflector and driver set complete in all respect. ( CAT A) |
| 19 | Supplying and installing, 300mmx50mmx1.6mm size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required |
| 20 | Supply and burying earth electrode for lighting conductor of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. |
| 21 | Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects as approved by Engineer-in-charge. |
| 22 | Supply and fixing of vertical air termination final rod comprising of 300mm long x 25mm dia. G.I. rod with one pointed prong and 100mm dia x 3 mm thick base plate etc. complete in all respect. |
| 23 | Supply and fixing of vertical down conductor of 32mm x 6mm G.I. strip etc. on approved clamps on surface for lightning conductor complete in all respects (for three/four storeyed Buildings). |
| 24 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 25 | Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 26 | Supply and fixing of testing joint ofG.I. strip 32mm x 6mm and 150mm long with G.I. bolts and nut etc. complete in all respect. |
| 27 | Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion ofwork. |
| 28 | Supply and Fixing Plywood 25mm thick withmica on brick wall, complete in all respect as directed by Engineer Incharge |
| 29 | Wiring for MCB controlled light point (FIRST POINT) with 1.5 sqmm FRLS pvc insulated copper conductor single core cable in existing surface/recessed medium class pvc conduit and earthing with 1.5sqmm FRLS pvc insulated copper conductor single core cable complete with all accessories as required. (cost of MCB is not included) |
| 30 | Wiring for light point (LOOP POINT) with 1.5 sqmm FRLS pvc insulated copper conductor single core cable in existing surface/recessed medium class pvc conduit and earthing with 1.5sqmm FRLS pvc insulated copper conductor single core cable complete with all accessories as required. |
| 31 | GST 18% |
AI Tender Summary
Tender Timeline
Nov 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 25, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender