Military Engineer Services-MES has published Tender For Repairs And Maintenance Of Dg Set, Control Panels And Connected Works And Certain Repair Of Chloronome Plants And Ro Plants And Water Level Indicators In The Area Of Age W S No I Under Ge U Water Supply Delhi Cantt 10. Submission Date for this Tender is 02-12-2023. Diesel Generators Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M&L for carrying out "B" check for the following Diesel Engine Driven Generator sets of Makes: Cummins/Kirlosker/Ruston/Greaves cotton /Ashok leyland as per manufacturer recommendation through an approved OEM agencies ofDG Set (Agency shall be approved by GE) and as per particular specifications including replacement of required necessary spares and replacement of Filters such as Fuel filter ,SLO By Pass Filter and lub oil filter complete sets along with rectification of minor defects, and cleaning of air filters/ breather,coolant tank with Blower and labour for filling/topping up and replacement of Engine oil/castrol coolant oil andtuning of engine for DG setas listed below complete all as specified and directed Note :- (i) Rate Quoted includes the cost of distilled water for batteries, Fuel Filter, Oil Filter,Air Filter and minor acessories such as nuts and bolts O rings and other minor parts valve note more than Rs. 500/- each. (ii) Engine Oil and Coolent oil shall be measured and paid seperately under respective items. (iii) An Inventory of replaced minor and major parts of DG Set will prepared by JE (E/M) as per site conditions and it got verified and signed by EIC. Inventory shall also be signed by authorised rep of OEM approval agency dully stamped. |
| 2 | DG Set of 400 KVA capacity |
| 3 | DG Set of 160 KVA to 200 KVA capacity |
| 4 | DG Set of 100 KVA to 125 KVA capacity |
| 5 | DG Set of 62.5 KVA to 82.5 KVA capacity |
| 6 | DG Set of 30KVA to 50KVA capacity |
| 7 | Supply olny castrol make Coolant oil for filling in DG Set of approved make in sealed containers complete all as specified and directed. |
| 8 | Supply aonly of castrol Activa syenthetic Engine oil(SAE 20 W 40) for filling in DG Set in sealed containers complete all as specified and directed |
| 9 | Dismantling and removing fuel injection pump from DG sets for repairs including of re-calliberation and replacement of necessary spares parts such as delivery valves, plunger, O ring , springs etc and refixing, testing& commissioning complete all as specified and directed for the follwing capacity of DG set:- |
| 10 | DG Set of 400 KVA capacity |
| 11 | DG Set of 160 KVA to 200 KVA capacity |
| 12 | DG Set of 100 KVA to 125 KVA capacity |
| 13 | DG Set of 62.5 KVA to 82.5 KVA capacity |
| 14 | DG Set of 30KVA to 50KVA capacity |
| 15 | Dismantling and removing of water pump from DG sets for repairs including replacment of necessary spares parts such as water seal. impeller key, impeller etc and refixing, testing & commissioning complete all as specified for capacity 30 KVA to 400 KVA DG Sets. |
| 16 | Dismantling and taking down radiator assembly from engine of any capacity for repairs including descaling, bracing as necessitated to plug leakages and M&L for transporting of the radiator of capacity upto 100 KVA and repair/maintenance to the rediator fins with the help of cleaning coil solution and cleaning to the radiator complete and repair to the leakage places by means of gas welding and including initial filling up coolant and re fixing after repairs including replacement of worn out nut bolts washers etc and testing& commissioning complete all as specified and directed |
| 17 | S&F in replacement of maintenance free Tabular Battery 12 V , 180 AH with 42 months warranty complete all as specified and directed |
| 18 | S&F in replacement of maintenance free Tabular Battery 12 V , 150 AH with 42 months warranty complete all as specified and as directed |
| 19 | S&F in replacement of maintenance free Tabular Battery 12 V , 120 AH with 42 months warranty complete all as specified and as directed |
| 20 | S&F in replacement of maintenance free Tabular Battery 12 V , 90 AH with 42 months warranty complete all as specified and as directed |
| 21 | M&L for repair self starter with replacement of carbon bushes, pinon, rewinding of starter and rotor winding with approved quality of winding wire as per existing andreplacement of defective pants etc to make the starter fully serviceable functioning & comminissioning and testing for DG Set any make any size as per site and complete all as directed by EIC. |
| 22 | M&L for cleaning oil fuel tank of DG sets of any make and capacity including replacement of fuel level indicating tube and markings complete all as specified and directed. |
| 23 | M&L for prepartion of old painted surface of Diesel Tank of DG Set outer surfaceold painted or rusted surface by scrapingandpainting withspray painting of greycolour synthetic enamel painttwo coats over a coat of red oxide primer complete all as specified and directed. |
| 24 | M&L for battery terminal of brass suitable 12V, 180AH Battery complete all as specified and directed. |
| 25 | S&F Battery charger with variable voltage for 12V,180AH battry complete all as specified and directed |
| 26 | M&L for battery lead copper conductor 50 Sqmm multi stranded PVC insulated with suitable terminals at both ends of required length for each battery complete all as specified and directed. |
| 27 | Supply and replacement of fuel flexible pipe, heavy duty with check nuts for DG set of any make/capacity complete all as specified and directed. |
| 28 | M&L for to carry out repairs to 12/24Volt dynamo by replacement of carbon brush, electronic regulator / rectifier, bearings reassembling the same and testing complete all as specified and directed. |
| 29 | S&F of Star Delta Timer 0-30 Second duration complete all as specified and as directed. |
| 30 | M&L for fabrication(welding work ) of DG set at various pump house for arresting leakges on oil tank complete all as specified and directed |
| 31 | Taking out old unservicable contactor and Supply and fixing power contactor 3 pole,25 Amp 415/440 volts 50HZ ML-1.5 complete all as specified and as directed |
| 32 | Taking out old unservicable contactor and Supply and fixing power contactor 3 pole, 32 Amp 415/440 volts 50HZ ML-2 complete all as per specified and directed |
| 33 | Taking out old unservicable contactor and Supply and fixing power contactor 3 pole,45 Amp, 415/440 Volts 50 HZ, ML-3 complete all as per specified and as directed. |
| 34 | Taking out old unservicable contactor and Supply and fixing power contactor 3 pole, 100 Amp, 415/440Voits,50 HZ, ML-4 complete all as per specified and as directed |
| 35 | Taking out old unservicable contactor and Supply and fixing power contactor 3 pole, 125Amp, 415/440Volts, 50HZ, ML-6 complete all as specifiedand directed . |
| 36 | Supply and fixing in replacement of Bimetal over load relay for ML 2/ ML3 starter type MNX range 9-14 Amp complete all as specifiedand directed . |
| 37 | Supply and fixing in replacement of Bimetal over load relay for ML 2/ ML3 starter type MNX range 13-21 Amp complete all as specifiedand directed . |
| 38 | Supply and fixing in replacement of Bimetal over load relay for ML 2/ ML3 starter type MNX range 20-32 Amp complete all as specifiedand directed . |
| 39 | Supply and fixing in replacement of Bimetal over load relay for ML 2/ ML3 starter type MNX range 45-75 Amp complete all as specifiedand directed . |
| 40 | S & F in replacement MCCB thermal relay range 320- 400 Amps, 4 pole 415Vof breaking capacity 50 KA andand connecting to bus bars and cable endtermination with suitable lugs complete all as specified anddirected |
| 41 | S & F in replacement MCCB thermal relay range 200- 250 Amps, 4 pole 415Vof breaking capacity 36 KA andand connecting to bus bars and cable endtermination with suitable lugs complete all as specified anddirected |
| 42 | S & F in replacement MCCB thermal relay range MCCB 160-200 Amps, 4 pole, 415 V, breaking capacity 36 KA complete all as specified anddirected |
| 43 | S & F in replacement MCCB thermal relay range 3 pole MCCB100-125Amps,415V, breaking capacity 30 KA complete all as specified anddirected |
| 44 | S & F in replacement MCCB thermal relay range 3 pole MCCB 63-80Amps,415 V, breaking capacity 18 KA complete all as specified anddirected |
| 45 | Fixing only change over switch 200 Amps 415 V, 4 Pole panel mounting type with all electrical connections including PCC and removing from existing unservicable change over switch complete all as specified anddirected |
| 46 | Fixing only change over switch 400 Amps 415 V, 4 Pole panel mounting type with all electrical connections including foundation and removing from existing unservicable change over switch complete all as specified anddirected |
| 47 | Preventivemaintenance of electric motor driven Chlorine dosing system any make including cleaning of electrode rode , HDPE/FRP tankof capacity up to 150 Ltr tank and checking functionality and performanceof level gauge , dosing pump,High pressure single head gear motor, pressure gauge, power pack incl oiling and greasing of all moving parts. Note : Spare parts required replacement while maintenance work will be measured & paid in relevent items. |
| 48 | Opening the motor of capacity 0.5HP, rewinding the motor with and including super enammeled copper wire of existing gauge,weight etc, reparing the same by replacing the unserviceable spare parts and re-assembling the motor in orignal position to make it functional complete all as specified and directed. |
| 49 | Supply only of gear motor 230 volt 50 Hz suitable for decrin dosing pump as per existing site complete all as specified and directed. |
| 50 | Supplyonly ofRotor assembly with bearing brackets and tolerance rings as per existing site compete all as specified and directed. |
| 51 | Supply only ofSingle head feed rate control with shaft as per existing site compete all as specified and directed. |
| 52 | Supply only ofPump head (Ferrules 1/4" including duckbill as per existing site compete all as specified and directed. |
| 53 | Supply only ofRoller assemblyas per existing site complete all as specified anddirected. |
| 54 | Supply only ofPump tube as per existing site complete all as specified anddirected. |
| 55 | Supply only ofInjection check valve 3/8"as per existing site complete all as specified and directed |
| 56 | Supply only ofWeighted suction line strainer 3/8" as per existing site complete all as specified and directed |
| 57 | Supply only ofWhite suction/discharge tube as per existing site compete all as specified and directed. |
| 58 | Supply and fixingin replacement of Diaphragm seal as per existing site completeall as specified and directed. |
| 59 | Supply and fixingin replacement of strainer only(Foot valve) as per existing site complete all as specified and directed. |
| 60 | Supply and fixingin replacement of Pipe(Discharge/suction) as per existing CPVC pipe as per existing site complete all as specified and directed. |
| 61 | Supply and fixingin replacement of Foot valve assembly (complete with ball,seal &spring of sized 15mm to 25mm ) as per existing site complete all as specified and directed. |
| 62 | Supply and fixingin replacement of pulser circuits & speed potentiometer as per existing site complete all as specified and directed. |
| 63 | Supply and fixing of power transformeras per existing site complete all as specified and directed. |
| 64 | Supply& fix of fuse assembly including fuse complete as per existing site complete all as specified and directed. |
| 65 | Supply& fixing of antisyphon valves (complete with ball, seal&Spring) as per existing site complete all as specified and directed. |
| 66 | Supply and fixing in replacement of FRP tank of capacity 100 Ltrs connection complete all as specified and directed. |
| 67 | Supply and fixing in replacement ofFRP tank of capacity 150 Ltrs as per existing sample connection complete all as specified and directed. |
| 68 | Supply & fixing in replacement ofFRP construction solution (chemical dosing system plunger type solution up to 25LPH ) comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP,1440 RPM assembly with agitator in one motor, agitator with ss sweep blade duly FRP coated, FRP tank 100 liters capacity, complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with chemical grade PVC NRV completeall as specified and directed. |
| 69 | Supply & fixing in replacement of FRP construction solution (chemical dosing system plunger type solution up to 50LPH ) comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP,1440 RPM assembly with agitator in one motor, agitator with ss sweep blade duly FRP coated , FRP tank 150 liters capacity, complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with chemical grade PVC NRV complete all as specified and directed |
| 70 | Supply and fix in replacement of Three Core Poly Tetra Fluoro Ethylene Teflon Silver Plated Copper Wire Shielded Temperature Range: -40°C to 240°C Size: 0.25sqmm (24/7/32) connection complete all as specified and directed |
| 71 | Supply and fix in replacement of 20.0 Sq mm ASTM Threaded Heavy Pressure Corrosion Resistant Pipe as per IS 4985/2000(Finolex/Prince) for Water Level Monitoring System connection complete all as specified and directed |
| 72 | Dismantling and opening of Root air blower ofcapacity 300 Cum/hrscomplete, pistons, liners etc for inspection and repair at site with replacement of u/s piston with ring, oil ring main bearing set, head gasket set and oil complete all as specifiedand directed . |
| 73 | Repairs, servicing and maintenance of RO Plant of capacity 200 LPH with replacement of Pressure sand filter, carbon filter, UV filter, Primary filter, including replacement ofwater pump and testing and commissioning complete all as specifiedand directed . (Note:- Testing, commissioning report of OEM authorised service lab agency will provide by contractor alongwith one year maintenance warranty & replacement of unserviceable parts during defect liability period of work). |
| 74 | Repairs, servicing and maintenance of RO Plant of capacity 100 LPH with replacement of Pressure sand filter, carbon filter, UV filter, Primary filter, including replacement of water pump and testing and commissioning complete all as specifiedand directed . (Note:- Testing, commissioning report of OEM authorised service lab agency will provide by contractor alongwith one year maintenance warranty & replacement of unserviceable parts during defect liability period of work). |
| 75 | Repairs, servicing and maintenance of RO Plant of capacity 10 LPH with replacement of Pressure sand filter, carbon filter, UV filter, Primary filter, including replacement of water pump and testing and commissioning complete all as specifiedand directed . (Note:- Testing, commissioning report of OEM authorised service lab agency will provide by contractor alongwith one year maintenance warranty & replacement of unserviceable parts during defect liability period of work). |
| 76 | Repairs, servicing and maintenance of RO Plant of capacity 3500 LPH with replacement of Pressure sand filter, carbon filter, RO membrane, Check valve, Sediment Pre-filter, Charcal & anti Scale system, UV filter, Primary filter,including repairs of dozing water pump and testing and commissioning complete all as specifiedand directed . (Note:- Testing, commissioning report of OEM authorised service lab agency will provide by contractor alongwith one year maintenance warranty & replacement of unserviceable parts during defect liability period of work). |
| 77 | Repairs, servicing and maintenance of RO Plant of capacity 10000 LPH with replacement of Pressure sand filter, carbon filter, RO membrane, Check valve, Sediment Pre-filter, Charcal & anti Scale system, UV filter, Primary filter,including repairs of dozing water pump and testing and commissioning complete all as specifiedand directed . (Note:- Testing, commissioning report of OEM authorised service lab agency will provide by contractor alongwith one year maintenance warranty & replacement of unserviceable parts during defect liability period of work). |
| 78 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth for taking out/laying of under ground cables/pipes etc n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out and in hard/dence soil complete all as specifiedand directed . |
| 79 | Returning, filling in, including spreading , levelling, watering, and well ramming in layers n-exc 25 cm complete all as specifiedand directed . |
| 80 | Removing excavated materials n-exc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specifiedand directed . |
| 81 | Supply and speading fine river sand in trenches for cushioning of under ground cable all as directed by Engr-in-charge at site complete all as specifiedand directed . (Note:- Only puned thickness of sand shall be measured & paid) |
| 82 | Supply and laying common burnt clay building bricks sub class "A" designation 75 old size bricks for cable protection complete all as specifiedand directed . |
| 83 | Supply,Laying and testing Cable LTXLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 50sq mm 3.5 Core including taking down of existing cable complete all as specifiedand directed . |
| 84 | Supply,Laying and testing Cable LTXLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 70sq mm 3.5 Core including taking down of existing cable complete all as specifiedand directed . |
| 85 | Supply,Laying and testing Cable LTXLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 95sq mm 3.5 Core including taking down of existing cable complete all as specifiedand directed . |
| 86 | Note:- Sch of credit amount of Rs.53900/- shall be deducted from total quoted BOQ Amount when work acceptance letter issued. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
