Tender For Reinstallation Of Shml 247-Re Installation Of Shml With Led Lights At Sherpur Chowk In Ward No 247 Under Shahdara(North) Zone

Sharing tender

Reinstallation Of Shml 247-Re Installation Of Shml With Led Lights At Sherpur Chowk In Ward No 247 Under Shahdara ( North ) Zone; 1 Od12051 / 2023-2024:Dsr-22 ( 5.1 ) Earthing With G.I. Earth Pipe 4.5 Mtr Long, 40Mm Dia Including Accessories, And Providing Masonary Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. ( But Without Charcoal Or Coke And Salt ) As Required. 2 Od12052 / 2023-2024:Dsr-22 ( 5.12 ) Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 3 Od12053 / 2023-2024:Dsr-22 ( 7.6.1 ) Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1.Kv Grade Of Following Size In Existing Masonry Open Duct As Required Upto 35 Sq Mm 4 Od12054 / 2023-2024:Dsr-22 ( 12.37 ) Supplying And Fixing Of Light Class G.I. Pipe Of 50 Mm Dia. ( Nominal ) 3 Metres Length Along The Pole For Protection Of Under Ground Cable As Required. 5 122.1.3:Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*10 Sqmm 6 122.2.3:Supply And Fixing Ofhot Press Sheet Mouldedcompound ( Smc ) Fire Retardant ( Temp. Resistance Up To 200 C ) , Ip 55 Weather Proofpole Window Door Suitable For 12M Semi High Mast Pole Etc As Reqd. 7 122.2.25:Providing And Fixing Of Stainless Steel Name Plate Of Size 6×8 Sq Inch Made Of 20 Gauge Sheet Including Engraved Name Of Area Representative Duly Painted Along With Ss Clamp Nut Bolt Etc As Required 8 122.2.30.A:Sitc Of 150W Led Flood Light Luminaire Fitted With Lens, Made Of Pressure Die Cast Aluminium Housing & Toughened Glass Cover Complete With The Following Specification As Reqd With Ip 66 Protection ( A ) Total System Wattage =150 Watt + / - 5% ( B ) Luminaire Efficacy>=100 Lm / W ( C ) Power Factor>=0.95 ( D ) Protection Class- Ip-66 9 Od12055 / 2023-2024:Dismantling & Re Installation, Testing, Commissioning Of 12 Mts.High Mast System With Its Accessories , Mast Shaft Shall Be In One Section , Hot Dip Galvanized ( Single Dip ) Inside And Out Sides And Suitable For Wind Velocity As Per Is 875 Part3 .There Shall Be In Longitudinal Seam Weld Per Section And No Circumfrential Weld. It Should Also Included Accessories For High Mast Head Frame , 2 Point Suspension System With Steel Wire Rope 5Mm Dia. ( 7 / 19Construction ) Single Drum Winch , Galvanized Lantern Carriage Arrangement Suitable For 4 / 6 Nos. Flood Lightluminaries Symmitrically And Its Control Gears Boxes And Lighting Finial , The Mast Shall Have Integral Manual Type Mounted At The Base Compartment Of Its Raising And Lowering Operation With Foundation Bolts And Anchor Plate And Control Panel Housing Suitable Rcc ( 1:2:4 ) Shallow Foundation Of Size 1M ( L ) X1m Wide And 2 Mtr Deep I / C Excavation Of Earth , Providing Cutting, Bending And Placing In Position , Reinforcement Of Cold Twisted Bars Of 12 Mm Dia -2100 Mm Long ( Approx ) -16 Nos And Reinforcement Of Cold Twisted Bar Of 8Mm Dia -3700 Mm ( Approx ) -13 Nos ( With 150Mm Spacing ) As Reqd With Positioning Of Foundation Bolts And Providing Dwc Hdpe Pipe For Cable Entry Or Exit As Required For The High Mast Considering The Safe Soil Bearing Capaciy At Site As 10T / Sqm At 2 Mts .Depth With All Material I / C 4 Nos S.P Mcb , 63 A Dp Isolator Etc As Reqd Logo / Name Of Manufacturer Shall Be Embossed On The Pole. Galvanization As Per Relevant Is