National Institute Of Technology-NIT has published Tender For Renovation Of Old Library Building For Space Allocation To Med And Csed Including Aluminium Partition, Internal Painting, Flooring And Construction Of An Additional Steel Staircase Etc.. Submission Date for this Tender is 01-12-2023. RCC Work Tenders in calicut Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | MASONRY WORK |
| 2 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 3 | Cement mortar 1:3 (1 cement :3 coarse sand) |
| 4 | Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size for superstructure above plinth level up to floor two level including all cost of materials, labour charges etc.. |
| 5 | Cement Mortar 1:6 (1 cement : 6 coarse sand). |
| 6 | WOOD AND P. V. C. WORK |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 8 | Second class teak wood |
| 9 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) |
| 10 | Second class teak wood |
| 11 | 35 mm thick shutters |
| 12 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 13 | Fixed to steel windows by welding |
| 14 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 15 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 16 | 125x64x1.90 mm |
| 17 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 18 | 200x10 mm |
| 19 | 150x10 mm |
| 20 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : |
| 21 | 300x16x5 mm |
| 22 | Providing and fixing bright finished brass handles with screws etc. complete: |
| 23 | 125 mm |
| 24 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 25 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 26 | 200x10 mm |
| 27 | 150x10 mm |
| 28 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 29 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 30 | Single rubber stopper |
| 31 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. |
| 32 | STEEL WORK |
| 33 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 34 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 35 | GI Tubular TATA or equvalent |
| 36 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 37 | Chequered MS Sheet |
| 38 | Supplying and fixing 6 mm chequered MS sheets cutting into the required sixe and fixing over duct with a coat of iron primer including cost and conveyance of all amaterials and labour charges etc. complete as per the instruction of the department officers. |
| 39 | FLOORING |
| 40 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 41 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. |
| 42 | Size of Tile 600x600 mm |
| 43 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 44 | Size of Tile 600x600 mm |
| 45 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 46 | Size of Tile 600x600 mm |
| 47 | ROOFING |
| 48 | Providing and fixing false ceiling with 7.5 mm thick specified PVC panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) |
| 49 | PVC plain panel 7.5 mm or nearest thick |
| 50 | FINISHING |
| 51 | 12 mm cement plaster of mix : |
| 52 | 1:4 (1 cement: 4 fine sand) |
| 53 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 54 | On steel work |
| 55 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 56 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 57 | One coat |
| 58 | Two coats |
| 59 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 60 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 61 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 62 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 63 | One or more coats on old work |
| 64 | French spirit polishing : |
| 65 | One or more coats on old work |
| 66 | Finishing Floors with premium floor guard (Apex floor guard or equvalent) with Silicone additives of required shade: |
| 67 | Old work (one or more coats applied @ 0.83 ltr/10 sqm). |
| 68 | Finishing surfaces with MRF or equlant polish glossy or matt finish with PU sealer coat two or more coats by using sprayer with cost and conveyance of all materials and labour charges etc. complete. |
| 69 | Dismantling and Demolishing |
| 70 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 71 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 72 | In cement mortar |
| 73 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 74 | Of area 3 sq. metres and below |
| 75 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : |
| 76 | Of sectional area 40 square centimetres and above |
| 77 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: |
| 78 | Channels, angles, tees and flats |
| 79 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 80 | For thickness of tiles 10 mm to 25 mm |
| 81 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 82 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 83 | SANITARY INSTALLATIONS |
| 84 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required : |
| 85 | W.C. pan with ISI marked white solid plastic seat and lid |
| 86 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete. |
| 87 | 10 litre capacity - White |
| 88 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete. |
| 89 | WATER SUPPLY |
| 90 | Providing and fixing Stainless Steel grating of approved quality and colour. |
| 91 | Rectangular type with openable rectangular lid |
| 92 | 100 mm nominal size square |
| 93 | Providing and fixing C.P. brass Health Fauset of approved quality conforming to IS:8931 : |
| 94 | C P Brass Health Fauset |
| 95 | ALUMINIUM WORK |
| 96 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : |
| 97 | For fixed portion |
| 98 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 99 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 100 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 101 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 102 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 103 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). |
| 104 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge |
| 105 | Powder coated minimum thickness 50 micron aluminium |
| 106 | Providing and fixing 4mm thick Aluminium Partition Panels, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 107 | 4 mm thick aluminium partion panels |
| 108 | Providing and fixing sun control film on glass including cost and conveyance of all materials and labour charges etc. complete. |
| 109 | White Sun Control film with 5% wastage |
| 110 | NEW TECHNOLOGIES AND MATERIALS |
| 111 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. including cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry and including providing, mixing and applying bonding coat of epoxy bonding adhesive (Nitobond EP or Equivalent) having coverage 2.20 sqm/kg of approved make on chipped portion of RCC as per specifications complete in all respect. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
