Municipal Corporation Shimla has published Annual Repair And Maintenance Of Of Lwss Shimla To Gumma Sh Providing Laying 200Mm Dia M S Pipe From Kanda Nallah To Gumma And Sluice Valve At Gumma Pumping Station. Submission Date for this Tender is 16-11-2023. Sluice Valve Tenders in shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Excavation in foundations, trenches etc. in earth work lift up |1.5 meters stacking the excavated soil not more than 3 [meteres clear from the edge of excavation and than returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth with in 20 meters. (50% Pick+50% Jumper work). |
2 | Providing and Laying M.S Pipe 200mm Dia 4.80mm thick |
3 | Providing, welding and fixing of 200mm dia M.S. flanges at suitable reaches, conforming to Table -5 as per IS:6392-1971 (Latest with upto date amendments) and welding of MS Flanges with M.S. Pipes/ MSERW pipes in two layers on both faces to make the joint leak proof (The cost of providing and laying of G.I.Pipes/MSERW Pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrode as per IS: 814-1991 and required number of nuts & bolts conforming to IS: 1364. The thickness of gasket not less than 3.00mm conforming to IS : 2712-1998. The work shall be done as per entire satisfaction of Engineer-in-Charge within all leads and lifts. |
4 | Providing circumferencial butt welded joints by electrical arc welding three layors to MS pipe as per API 5L (STD) X-60 having following wall thickness welded in effective throat thickness of wled conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Avari Oerlikon (Adore)CITOJET/ESAB make conforming to IS: 814-1001, at site of work complete in all respects including manualmechanical handing of pipes in all lead and liftsto the entire satisfaction of Engineer-in-Charge. |
5 | Providing and fixing KIRLOSKAR LeaderCI Sluice Valvea IS marked with flanged ends as per API standard complete with nuts and bolts of size of 200mm NB (Nominal pressure ) 150kg/cm2 including entire carriage of materials upto all leads and lifts conforming to IS Code with latest amendments. |
6 | 200mm dia C I Sluice Valve PN 1.6 |
7 | Providing and Fixinf Matellic Gasket 200mm dia |
8 | Providing and Fixing Nuts and boilts |
9 | Hire Charges for Diesel Generator set for cutting of pipe with all leads and lifts complete in all respect. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail