Tender For Construction Of Crematorium In Survey No 15 1 At Sonal In V P Sanvordem Sattari Goa Under Special Project Atmanirbhar Bharat Swayampurna Goa
Tender Value
24.93 Lakhs
Estimated cost
Bid Submission
20 Nov 2023
0 days left
EMD
49865
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sanvordem → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Crematorium In Survey No 15 1 At Sonal In V P Sanvordem Sattari Goa Under Special Project Atmanirbhar Bharat Swayampurna Goa
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5m in widthor 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50m. |
| 2 | All type of soil |
| 3 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 4 | Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggregate. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 5 | All works upto plinth level |
| 6 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 mm. nominal size) excluding cost of centering,shuttering and finishing in: |
| 7 | All works upto plinth level |
| 8 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1cement :4 coarse sand)in foundation and basement. |
| 9 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1cement :4 coarse sand)in foundation and basement.+ Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. |
| 10 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 11 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 12 | Neat Cement punning |
| 13 | a) Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins,afters, trusses, flashings etc.complete as per the directions of the Engineer in charge. |
| 14 | c) Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the irections of the Engineer in charge. |
| 15 | Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. |
| 16 | In flats of all sizes |
| 17 | Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. |
| 18 | In tees, angles, flats and channels |
| 19 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc.,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped ashers etc. complete. |
| 20 | Providing & laying cement concrete 1: 1.5: 3(1 cement: 1.5 coarse sand: 3 graded granitic or basaltic stone aggregate. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 21 | All works upto plinth level |
| 22 | Providing and laying in position (1:11/2:3) Reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement (1 cement: 1½ coarse sand:3 graded stone aggregate 20mm nominal size) |
| 23 | All works upto plinth level |
| 24 | In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 25 | in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level |
| 26 | Centering & shuttering including Strutting, Propping & removal of forms for : |
| 27 | Foundations, Footings, Bases for columns |
| 28 | Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan) |
| 29 | Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 30 | Providing TMT steel reinforcement (Confirming to IS 1786 of 1986)for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floorsalongwith the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 31 | Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slabincluding rubbing & polishing complete |
| 32 | 25 mm thick. |
| 33 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. |
| 34 | Plain grill |
| 35 | Painting (two or more coats) with black anticorrosive bitumastic paint of approved brand and manufacture on new work to give an even shade. |
| 36 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 37 | Finishing wall with superior quality waterproofing cement paint ( super snow hem or equivalent) ofrequiredshade on new work (three or more coats) to give an even shade. |
| 38 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 39 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001:2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. |
| 40 | 60 mm thick in all colours except grey (M35grade) |
| 41 | 60 mm thick in Grey colour (M35 grade) |
| 42 | Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum ontent of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. |
| 43 | Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity. |
| 44 | Size 900 x 400 x 100 mm with steel reinforcement not less than 5.0 kgs per unit -12 T capacity |
| 45 | Providing and fixing coloured ceramic tiles (Bell or equivalent) of 8\" x 12\" size and 6 mm thick in skirtingand dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete. |
| 46 | Providing and fixing vitrified antiskid tiles(320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed ofcement mortar 1:3 and jointed with cement slurry complete. |
| 47 | Providing and fixing louvers 50 mm wide in grooves in clerestory windowframes excluding the cost of frames. |
| 48 | b) Glass sheets 3 mm thick |
| 49 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. |
| 50 | Plain grill |
| 51 | Providing and fixing of aluminium window with 3 tracks and 2 shutters sliding window with tobular frame ployster powder if thicness 75-80 microns with pproved standard accessaries such as ball beaing rollers, concealed lock, 6mm thick plain clear glass with EPDM beading etc. |
| 52 | Providing and fixing prefabricated compoundgate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basalticaggregate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 53 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. |
| 54 | Second class Indian teak wood |
| 55 | Providing and fixing 35mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including black enameled iron butt hinges with necessary screws: |
| 56 | Second class Indian teak wood |
| 57 | Providing FRP door shutters 35mm thick with frame size in clear opening of 0.75x2.10m hinges and screws complete., |
| 58 | Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete |
| 59 | 250 x 10 mm |
| 60 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete |
| 61 | 125 x70 x 4 mm (ordinary type) |
| 62 | Providing and fixing bright finished brass door latch with necessary screws etc complete |
| 63 | 300x 16 x 5 mm |
| 64 | Providing and fixing bright finished brass handles with necessary screws etc complete |
| 65 | 125 mm |
| 66 | Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C..Flushing cistern (of approved make) with fittings, rack bolts 32 mm diameter P.V.C.Telescopic flush pipe with fit tings and clamps 25mm P.V.C... over flow pipe withspecials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls and floors where required. |
| 67 | W.C. pan with white plastic seat and lid. |
| 68 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. |
| 69 | Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps. |
| 70 | Providing and fixing brass bib cock (heavy) of approved quality : |
| 71 | 20 mm nominal bore |
| 72 | Providing and placing on terrace roof of floor two (1st floor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming toI S 12701; 1996. |
| 73 | c) 1000 lit. capacity |
| 74 | Providing and fixingU.P.V.C. pipeclips (approved make ) for S.W.R. pipes: |
| 75 | 110 mm dia |
| 76 | 75 mm dia |
| 77 | Providing and fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching ad refilling etc (external work) (high density): |
| 78 | 25 mm nominal bore. |
AI Tender Summary
Tender Timeline
Nov 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender