Military Engineer Services-MES has published Tender For Special Repair Of Main Pump House Em Installation Provn Of One Toilet And Bathroom At Bldg No P179 Gunner Officers Mess Provn Of Green Sheet With Frame Near Single Living Along Main Road At 23 I R D Flt Provn Of Chain Link Fence Work For B. Submission Date for this Tender is 12-12-2023. LED Light Tenders in Dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Nov-2023 | AmendBOQ | BOQ | 23-11-2023 |
| 2 | 14-Nov-2023 | Date Extnd | Date | 30-11-2023 |
| 3 | 22-Nov-2023 | AmendBOQ1 | BOQ | 30-11-2023 |
| 4 | 30-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-12-2023 |
| 5 | 07-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-12-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed. |
| 2 | Demolition of cement concrete (Un-reinforced) in any position n.exc 15cm thick (above or below GL) complete all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil |
| 4 | M&L RCC Design mix M-25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concreteas complete all as reqd & directed. |
| 5 | S & F Mild steel TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm diaor securing with clips |
| 6 | S & F Mild steel TMT bars5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 7 | M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 8 | M&L Brickwork with sub class B bricks straight or curved on plan to any radius in half brick thick wall in CM 1:4 complete all as specified and directed. |
| 9 | M & L for Walling of random rubble, uncoursed well bonded built in Cement mortar 1:6 for water retaining structure including suitable arrangements to divert the flow of water for construction of retaining wall complete all as specified and as directed. |
| 10 | M & L for Walling of random rubble, uncoursed well bonded built in Cement mortar 1:6 except stonefor water retaining structure including suitable arrangements to divert the flow of water for construction of retaining wall except stone complete all as specified and as directed. |
| 11 | Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 12 | M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L 15mm thick rendering cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 14 | M&L 5mm thick rendering in ceiling of cement mortar (1:3) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed |
| 15 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 16 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6)in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 17 | M&L glazed ceramic coloured tiles 450x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 19 | S&F Plate girder or single stanchions , built up of one beam or channel section with flange plates, caps, bases, splices etc built up from two or more beams or channel section or angles with plates including all lattice bars stiffeners, gusset plates etc |
| 20 | S&F in repair steel wire fabric exc 4 Kg Per Sqm welded to existing MS frame work |
| 21 | S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 |
| 22 | S&F MS Flat iron straps 40x5 mm as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc; and similar work conforming to Fe-410-0 or Fe 310-0. |
| 23 | S&F mild steel screw bolts (machine made) 11 to 15mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut nexc 10cm long . |
| 24 | Supply only chain link fencing of mesh of size 50x50/75x75/100x100 mm of any dia of wire complete all as specified. |
| 25 | Fixing only chain link fencing of mesh size (50x50)mm and dia of wire 3.8mm complete all as reqd & directed. |
| 26 | S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm diaat 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 27 | Dismantling Asbestos cement/ galvanium aluminium (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 28 | S & F Rolled sections of Fe-290(Gde E-165) as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. |
| 29 | S & F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and as directed. |
| 30 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed. |
| 31 | S & F forGI tubing 20mm bore, medium grade with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete. complete all as specified and directed. |
| 32 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed. |
| 33 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.50 but nexc 4.00 Sqm and removing from site complete all as specified and directed. |
| 34 | Taking down door shutters of size exc 1 Sqm and n exc 2 sqm removing from site complete all as specified and directed. |
| 35 | M & L Solid (100 mm X 63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg / Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engr-in- Charge. The door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed. Make Rajshree Plastiwood, Kumar Arch TechPvt Ltd, Archid Ply, Floresta Make : Rajshree Plastiwood |
| 36 | M & L (125mm X 63mm Double Rebate) Factory made 100% solid WPC Door frame made from 100% LEAD FREE (Single extruded process) material with density 780kg / Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engr-in-Charge. The door frame should be water proof, Termite proof, Fire retardant and having excellent screw holding capacity complete all as specified and directed. Rajshree Plastiwood Make Rajshree Plastiwood, |
| 37 | M & L 30 MM thick moulded plain WPC solid door shutter: Providing (30mm thick) MOLDED WPC Brown factory made 100% solid door (Conforming As per IS: 4020) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/ Cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity. complete all as specified and directed.Make;Rajshree Plastiwood |
| 38 | M&L 35mm thick IInd class hardwood glazed and skeleton factory made shutters with three panels, open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed. |
| 39 | S&F mild steelbutt hinges cold rolled 100mm long complete all as specified and directed. |
| 40 | S&F Aluminium anodised barrel tower bolt 150mm long of extruded section complete all as specified and directed. |
| 41 | S&F Aluminium alloy anodised sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 42 | S&F aluminium handle cast type 150mm long complete all as specified and directed. |
| 43 | M&L 50mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 44 | M&L 100mm thick PCC (1:2:4) type B-2 (Using 40mm graded stone aggregate) as in hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed. |
| 45 | M&L for cement concrete 1:3:6 type C2 ,75mm thickusing 40mm graded stone aggregate over rammed earth as in hard standing /plinth protection laid in panels and joints to be provided at regular distance and filled with bitumen/cement and finished the top surfaces even and fair without using extra cementcomplete all as specified and directed by Engineer-in-charge. |
| 46 | M&L Cement concrete PCC 1:4:8 type D2 using 40mm graded aggregatein foundations, filling and mass concrete complete all as specified and directed. |
| 47 | M&L for Chipping of unsound /weak concrete materials including cover plaster fromRCC structural member i.e. slabs , beams, columns ,lintel,chajja, fin , facia etc. 50 mm average thicknessincluding tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting including foreign materials , loose concrete/aggregate etcand disposal of all debris out side of MOD land and complete all as specifiedandas directedby Engr-in-Charge.(Anystorey/ height of building/ structure) |
| 48 | Material and labour placing in position free flow shrinkage cementitious micro concrete of compressive strength,flexural strength shall not be less than 50 MPa at 28 days , 5MPa at 28 days respectivelyfor strengthening of beams, columns & other structural elements of average thickness 50mmand including surface preparation & suitable type formwork etc. as per manufacturers instruction complete all as specifiedandas directed. |
| 49 | Taking down existing tar felt and plastering from the roof surface washing down and cleaning the surface with water and rubbish off the premises and M&L 15mm thick cement plaster (1:4) for finshing existing surface and over laying water proofing treatment on top surfaces of roof after cleaning of roof surfaces with water and filling cracks with sealing compound and dried top surface of roof. Apply a coat of cold bituminous primer @ 0.30 liter per Sqm and followed by a layer of APP polymer modified five layered water proofing membrane 3mm thick weight not less than 3.60 Kg/Sqm with non woven polyester reinforcement (weight not less than 150 gm/Sqm) of M/s STP Texsa Ltd or M/s IWL (I) Ltd or M/s STP Ltd. The APP membrane shall be laid with LPG connected torch method. A layer of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm and a layer of bituminous aluminum paint as final finish @ 0.20 Kg/Sqm shall be applied on top surfaces of APP membrane, Application including overlap, side lap shall be provided as per manufacturer instructions and as specified and directed The side lap and end laps should have overlap of 75mm to 100mm and should be thermo fused together so that it forms a single sheet through out complete all as specified and directed by Engr-in-Charge. |
| 50 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed |
| 51 | M & L 50 mm +/- 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) mixed withliquid water proofing compound (as per manufacture direction and paid separately) over and incl one coat of cement slurry admixed with acrylic bonding compound SBR Latex liquid polymer as to be used for bonding of new concrete / mortar to old surface as per manufacturer direction and finishing the surface even and fair(without using extra cement) as in roof padding to receive roof treatment complete all as specified and directed. |
| 52 | S&F in repairs PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site. complete all as specified and directed. |
| 53 | S&F in repair 15mm dia gun metal gate valve with iron wheel headed, screwed both ends to iron pipe complete all as specified and directed. |
| 54 | S&F in repair 20mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed. |
| 55 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed stainless steel wire staples/xpm |
| 56 | S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed stainless steel wire staples/xpm and fix by weld to steel windows |
| 57 | S & F 3 mm sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane |
| 58 | M&L for two coats of cement based paint over a coat of primer to newly plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 59 | M&L for preparation of old surfaces on walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface smooth by sand paper and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge. |
| 60 | M & L three coats of whitewashing to new plastered surfaces of walls after preparation of surfaces complete all as specified and directed by Engr-in-Charge. |
| 61 | M & L two coat of whitewashing to old decorated surface walls after preparation of surface complete all as specified and directed by Engr-in-Charge. |
| 62 | M & L three coats of whitewashing to newly plastered surfaces of ceilings after preparation of surfaces complete all as specified and directed by Engr-in-Charge. |
| 63 | M & L two coat of whitewashing to old plastered surfaces of ceilings after preparation of surfaces complete all as specified and directed by Engr-in-Charge. |
| 64 | M&L for preparation of old decorated surfaces of wood and wood based materials, wooden, plastered, concrete surfaces of any descriptions not otherwise described over 10Cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 65 | M&L for preparing new steel and Iron surfaces of any description over 10 cm Width /Girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces complete all as specified and directed. |
| 66 | M&L for preparing old painted steel and Iron surfaces of any description over 10 cm Width /Girth and applying one coats of synthetic enamel paint of any tint all as directed |
| 67 | Excavating in post holes (or similar holes) any type of soil each n exc0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as directed. |
| 68 | M&L PCC 1:3:6 type C-2 (Using 40 mm graded aggregate) in Foundation, filling and mass concrete in post holes complete all as specified and as directed. |
| 69 | S & F Framed work such as grills, gates,gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; framed angle for chain link fixing, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 as specified and directed. |
| 70 | Supply only galvanized iron chain link fencing of any size as or type complete all as specified and directed. |
| 71 | Fixing only chain link fencing including line wires, any mesh, size and type of standards,rails,straining bolts,etc including provision of binding wire all as directed. |
| 72 | M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips/welded to frames conforming to Gd .I,IS-432 (Part I) Part-I complete all as specified and directed. |
| 73 | S&F 2.0mm thick fibre glass reinforced plain translant sheet any colour as approved and fixed to framing complete all as specified and as directed. |
| 74 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm inany type of soil. complete all as specified and directed. |
| 75 | Removing excavated material n. exc 50m & depositing where directed at a level n.exc.1.5m above the starting point.complete all as specified and directed. |
| 76 | M & L PCC 1:2:4, type B-0, 40 mm thick in Damp Proof Course to horizontal or vertical surfaces including necessary formwork with using WPC @2% by weight of cement. (Note:- WPC shall be measured and paid separately under respective item as "Supply only". |
| 77 | Supply only integral waterproofing compound (Powder) complete all as specified and directed. |
| 78 | M & L broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 79 | M&L for two coats of oil bound distemper over a coat of 2mm thick wall putty to newly plastered surface including preparation of surfaces complete all as specified and directed |
| 80 | M & L for providing reinforced cement concrete (nominal mix) type B1 1:2:4 using 20 mm graded stone aggregate as in Beam,cantilevers,bressummers,lintelsall as specified and directed. |
| 81 | M & L TMT bars 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.. |
| 82 | M & L for use and waste of formwork to sides and soffits of floor,lintels band & beams including supports, overhangs, etc. with rough finished surfaceof concrete all as specified and directed. |
| 83 | M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in sub bases of floor as specified and directed. |
| 84 | M&L 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub bases of floor complete all as specified and directed. |
| 85 | S & F Rolled Mild Steel sections confirming to Fe 410 - W (grade E 250 Quality)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates. Complete all as specified and directed by Engineer in Charge . |
| 86 | S&F for anodised aluminium snap grid frame work for false ceiling (grid size 605 x 605mm) fixed to walls with rawl plugs and screws and hang to roof members with6mm hanger bar of dia GI wire (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long with and including 12mm thick perforated particle board of 60x60cm in size fixed or laid / inserted to Aluminium frame work complete all as specified and directed. |
| 87 | S&F Aluminum powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.80mm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design |
| 88 | S&FSolid PVC door frameof size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed. |
| 89 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded ivory colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of ivory colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and 5mm thick x 15mm wide PVC sheet beadings used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading and suppling & fixing in the frame at site as per specification & drawing. |
| 90 | S&F for 15mm bore dia ofmedium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floorall as specified |
| 91 | Cutting chases, pinning in brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 92 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes ( ISI Marked),single socketed in any length with rubber ringjoints laid in trenches or in floors.complete all as specified and directed. |
| 93 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes, ( ISI Marked), single socketed in any length with rubber ringjoints laid in trenches or in floors/walls.complete all as specified and directed. |
| 94 | S & F 75 mm bore PVC (SWR) Multi floor trap including jointing with solvent cement ( ISI Marked) . complete all as specified and directed. |
| 95 | S&F in repair PVC bend any radius 110mm bore with access door complete all as specified and directed. |
| 96 | S&F Vitreous China wash basin, white, flat back, size 550x450mmexcluding taps, waste, chain and plug and porcelain stopper but including waste coupling of PTMT (min weight 32mm-45gmscutting for pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 97 | Supply only 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button including 32mm dia PVC flush pipe icomplete all as specified and directed. |
| 98 | S&Fvitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete all as specified and directed. |
| 99 | S&F pillar taps,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed |
| 100 | S&F Viterous China urinal full stall type, white complete including providing and fixing plugs, bedding urinal against wall in Cm 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; includingfixing with waste coupling of PTMT suitable for urinals (min weight 32mm-45gms) and urinal spreader of PTMT anyfixing with 15mm dia pipe ,fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. complete all as specified and directed. |
| 101 | S&F CP Grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar complete all as specified and directed. |
| 102 | S&F in repair CP toilet paper holder with flat recessed type stainless steel fixed to wall with CP brass screw complete all as specified and directed. |
| 103 | S&F SS soap dish fixed to wall with screw complete all as specified and directed. |
| 104 | S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections fixed in position complete in all respect as specified and directed. |
| 105 | S&Fbrass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed. |
| 106 | S&FSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long incl aluminium alloy bracket and guard rail complete all as specified and directed. |
| 107 | S&F 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified |
| 108 | S&F 15mm bore dia fancy type, chromium plated angle valves, cast copper alloy,screwed down,high pressure, with crutch , screwed both ends for iron pipe or for unions and fixed |
| 109 | S & F r rotational moulded PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity1000 Ltr with and including PTMT float valve 20 mm dia & making connection for inlet and outletcomplete all as specified & directed. |
| 110 | S&F gun metalglobe gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe etc complete |
| 111 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out any type of soil complete all as specified and directed.. |
| 112 | M & L PCC 1:2:4, type B-0, 40 mm thick in Damp Proof Course to horizontal or vertical surfaces including necessary formwork with using WPC @2% by weight of cement. (Note:- WPC shall be measured and paid separately under respective item as "Supply only". |
| 113 | S&F Steel windows or ventilators, fixed type, with glazing bars including fixing of wiremesh complete all as specified and directed. |
| 114 | S&F stainless steel tower bolt 150mm long of extruded section complete all as specified and directed. |
| 115 | S&F SS butt hinges 100mmlongmedium weight cold rolled mild steel complete all as specified and directed. |
| 116 | S&F in repairs Vitreous china Squatting pan (Ist quality) , "Orissa pattern, size 580 x 440 mm white, with integral foot rest(excluding flushing cistern and flush pipe) including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor complete including provison of lime concrete bedding all as specified and directed |
| 117 | S & F in repair CP shower rose with or without swivel joints of 125 mm size with shower arm including fixing to steel pipe or union complete all as specified and directed |
| 118 | S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade "A", laid in trenches and jointed in CM 1:1, complete all as specified and directed |
| 119 | M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed |
| 120 | M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed |
| 121 | M&l for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in coping, filling and mass concrete complete all as specified and directed |
| 122 | M&L for precast cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in manhole covers set in CM 1:4 complete all as specified and as directed by Engr-in-Charge |
| 123 | M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation. |
| 124 | Supplying and layingcommon burnt bricks, clay building, sub class "B" desingation 75 in trenches for cable protection complete all as directed. |
| 125 | Material & labour for GI pipe 40 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed . |
| 126 | Supply and fixing SMC kiosks box suitable for three phase 415 volts AC supply with 04 Nos Aluminium bus bar rating 63 amps with one NoMCB 16 Amps, SP having size 350x270x200 mm complete including making fixing arrangement with 12 mtr long swaged pole wiht flat iron clamp all as specified and directed by Engr-in-charge. |
| 127 | M & L for supply, erection and commissioning ofsteel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screwes as specified type LT type 410 SP-55, (12m long)including placing at new location complete withexcavation, earth work, PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundation and coping of poles with PCC 1:3:6 type C1 (using 20mm graded stone aggregate) complete all as directed by Engineer-in-Charge. (Note :- Excavation, earth work and concrete work complete not included in unit item of the rate quoted by the Contractor and the same will be paid seperately). |
| 128 | Supply and lay LT UG CableXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 4 core complete all as directed by Engr-in-charge. |
| 129 | Supply and fixing LED flood light 200 Watts 230 Volts, AC,Out door type with thermal management in multiple optics and equiped with IP-66 protection, with impact and corrosion resistant complete with driver and lamp complete including taking down old UNSV light fitting from swaged/High mast light pole of maximum 12 metre height from the normal ground level all as specified and directed. |
| 130 | Material and labour for providing cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling for poles complete including dismantling old PCC of any description all as specified and directed by Engr in charge. |
| 131 | Material and labour for providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) for coping of poles including necessary form work and finished the surface complete all as specified and directed by Engr in charge. |
| 132 | Supplying and fixing 1100 Volts grade heavy dutycable PVC insulated copper conductorPVC round sheathed (flexible) industrial cablein hight mastlight pole connection from pole junction box at bottom to light fixed on 12 mtr long swaged pole by making two holes with welding machine for inserting cable of size 4.0 Sqmm 3 core multistranded including making all necessary connection all as specified. make of cable - Plaza/Gloster/havells |
| 133 | Boaring holes horizontally under Road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 100 mm dia for passing of UG cable all as specified and as directed.(GI Pipe laid shall be measured seperately) |
| 134 | M & L for Earthing complete with galvanised steel pipe electrode, 600 x 600 x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to galvanised earthing lead of 4 mm dia of iron or steel wire all as shown in electrical plate No. 5 all as specified and as directed.Note :- the cost of excavation and earth work PCC pit and CI cover funnel & watering pipe, wiremesh, charcoal dust and common salt shall be deemed included in the unit rate for earthing all as specified and as directed by EIC. |
| 135 | M & L for MS cross arm, angle, clamps, nuts, bolts and washers and supply and fixing new MS Cross arms, bracings, supports, clamp and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any type, shape or as indicated and directed inclusive of one coat of red oxide and one coat of aluminium paint complete all as specified and directed by Engr in charge. |
| 136 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams complete all as specified and directed by Engr in charge. |
| 137 | NOTES :- 1.For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
