|
| 1 | Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNSS23 & 24, V, VI (S2), VII, 9,10 |
| 2 | Cement Concrete of mix 1 : 4 : 8 (One Cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. |
| 3 | Plain Cement Concrete of mix 1 : 3 : 6 (One Cement three sand six aggregates) using 20mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. |
| 4 | Supplying anderrectingsteel centering including necessary supportsfor plain surfaces for Reinforced Cement Concrete works such as Coloumn footing,Coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10Bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floorsComplying with standard Specification( TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VII (Plain Surface) |
| 5 | Supplying anderectingsteel centering including necessary supportsfor plain surfaces for Reinforced Cement Concrete works such as Column footing, Column pedestals, plinth beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10Bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm center to center or at suitable intervals etc complete in all floorsComplying with standard Specification( TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VII |
| 6 | Rein forced Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 7 | Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. TNDSS NO: 97 V,VI (S6) VII (S6) VII-3 |
| 8 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best Second Class Bricks of size9 ” x 4 3/8 “x 2 3/4 ”from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 9 | SpecialPlasteringinC.M. 1 : 3 ( One cement, three sand) to10 mmthickincludingallcostandconveyance ofallmaterialstositeincludingcostofcementwhichwillbepurcharedlocallybythe contractor andconveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother. |
| 10 | PlasteringinC.M. 1 : 5 (1cement 4sand)to12 mmthickincludingallcostandconveyanceofallmaterials tositeincludingcostofcementwhichwillbepurcharedlocallybythecontractor and conveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother. |
| 11 | Floor Finishing First Quality Design Ceramic tiles of All colours of sizes 305mm x 305mm x 6mm. laid in cm 1:3 mix 10mm thick and pointing with white cement using 0.4kg/sqm including finishing the joint and pointing flush with tiles surface etc complete |
| 12 | Dadooing sides of walls with Glazed design tiles of size 305 x 200 x 6mm set in Cement Mortar 1:3 ( One cement, three sand) 20mm thick and pointed with the same colour cement including cost and conveyance of all materials, labour charges complete as per standard specification. |
| 13 | Supply and Fixing of PVC SolidDoors with Necessay Accessories and Locking Arrangements including cost and conveyance of all materials and labour charges etc., complete as per standard specification |
| 14 | Supplying and Painting thewalls with TwoCoatsWeather sealedExterior emulsion Paint as instructed by the departmrntal officers includingPreparation of surface curing, etc complete in all floorscomplying with standard specification. ( The Colour and shade of the paint shall be got approved by the departmental officers.) |
| 15 | Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light Point for electronic regulator. (Assume 5 Points Per Coil) (SD-25) |
| 16 | Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylem sheet cover for 5 A 3 pin non interlocking FT wall socket and 5A FT switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. (SD-38) |
| 17 | Supply andfixing of 16 Amps DP switch with metal glad of 500V with fuse and nuetral ( side handle) on suitable TW box PWD earthing(SD. NO 141) |
| 18 | Supply and Fixing of TNEB meter Board suitable for 32A Single Phase Service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper Flat) on TW Plank of Size 375mm x 300mm x 19mm with Supporting TW Reepers of 1\" thick an either side with Painting with Suitable bolt and nuts for fixing the TW Plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB Meter to Fuse Unit (SD No :125) |
| 19 | SupplyingandFixingin position best approvedof BIS quality 110mm P.V.C RainWaterdownfallpipe having a pressure of 4Kg / Sq.cm including cost of necessary PVC shoe,PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc, and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc, complete. The rate shall be inclusive of cast of removable cast iron grating. The PVc pipe shall be fixed in wall with special type of \"U\"clamp at the centre of the pipe line in addition to those for more than 3.00mt pipe length etc,CompleteComplyingwithStandardSpecifications. |
| 20 | Supplying and fixing in position first quality and approved variety of 32mm Gun Metal Gate Valve (Heavy type) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements. |
| 21 | Supplying and fixing of 1000 Liters capacity HDPE tank with IS specification IS 10701/96 the tank is meant for outdoor (or)indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessary man hole with cover and including all PVC specials pugs, screws nails to fix the tank etc., complete and the tank should fixedfirming as directed by the departmental officers.The rate shall be inclusive of all materials, labour conveyance hoisting and fixing charges etc. (The water tank should be got approved by the EEbefore use on work. |
| 22 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 23 | Supplying and fixing in position white glazed Indian water closet of size 580 X 440mm of Orissa type of approved quality with \"P\" or \"S\" trap with sand cushion and forming flooring alround the closet using 40mm broken brick jellylime concrete 1:2:5 ; 100mm thick and finishing the top torequired slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / RCC works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmentalofficers. (The water closet should be got approved by the Executive Engineer before use on works.) |
| 24 | Supply and fixing of mild steel grill works for windows, ventilators, etc including redoxide priming coat and cost of materials and all labour charges etc. complete. |
| 25 | Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc,in all floor withtwo coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc,complete complying with Standard Specification. ( The Make, Quality and colour of paint should be got approved bythe engineer in charge before use on works )( TNSS NO or NBC No 61 V VI (54) 3) |
| 26 | Plain Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 27 | Supplying and laying Cement concrete Rubber Moulded Hydraulic Pressed Paver Block M40 grade of80mm thick high strength type confirming IS 15658-2007 of required size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with stone dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibrating the pavers, sweeping, transporting loading and unloading of paver block as per the standard specification. |
| 28 | Supply and fixing of swing 2 seater with Rubber Seat:- A-Frame :1.5\" Galvanished B class pipe, Seats: Ruber, Chain: 8mm Stainless Steel Chain (grade-304) Painting with PU coating Product Area: 10ft x 9ft Play Area:15ft x 15ft. |
| 29 | Supply and fixing of Wave Slide 8ft FRP: (component) Ladder: Galvanished B class pipe sliding chute 9ft, BED LEG: Galvanished c class pipe, Height: 5ft, FRP thickness 4mm. (Reinforced polymers in 5 layers) 450CSM Matt, 600 Roving Mat, Isotolic gel coat with PU pigment. Painting with PU coating, Width:2ft (Required area) Product Area:2.5ft x 12ft. |
| 30 | Supply and fixing of See-Saw 4 Seater FRP:- Height: 1.5 ft Width:5ft, Frame:1.5\" Galvanished B class Pipe, See Saw Rail: 2\" Galvanished C class Pipe, Seat: FRP Seat with 450 CSM Mat 3 Layers bonding, Isotolic gel coat with UV pigment. Painting with PU coating seat size:15ft x 14ft product Area 5ft x 10ft play area:8ft x 12ft. |
| 31 | Supply and fixing of Merry Go Round - 6 Seater (FRP):- Height:3\" Gi Pipe, 2.5mm thick, B class Seat Size :15\" x 14\", Paint: Pu Coating. |
| 32 | Spiral Slide Senior FRP:- (Component) Ladder: Galvanished B Class pipe slide, FRP Spiral slide, BED LEG: Galvanished C class pipe(Measurement) Height: 6.5ft FRP thickness 6mm. (Reinforced Polymers in 7 Layers), 450 CSM matt, 600 Roving mat, Isotolic gel coat wth UV pigment. Paintingwith PU coating, Width: 10ft, (Required area) Product area:6ft x 10ft, Play area: 8ft x 15ft. |
| 33 | Supply and fixing of Elephant Slide FRP:- Material: 16 gauge Galvanished Sheet, MS angle, Ms flat & GI pipe, Slide: FRP slide (10ft length) Product area: 3ft x 21ft, Play area: 6ft x 25ft. |
| 34 | supply and Fixing of GI steel tubular pole for 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65m |
| 35 | Supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia. GI pipe (class B) with 1 No. 19mm GI bend complete on the existing post / on wall with PVC unsheathed copper leads with MS clamps with painting (SD-533) |
| 36 | Earthing as per PWD standard specification with on earth electrode of 2m class \"B\" pipe of dia not less than 32mm complete. Brass cable event for suitable armoured LTUG cable with earth connection suitable of 4 X 16sqmm etc complete (SD-234) |
| 37 | Supply and erection of 4 x 6 Sqmm UG Copper Cable, including cost and coveyance of all materials to site andlabour charges etc complete.. (SD-201) |
| 38 | Supply and erection of 2 x 10 Sqmm UG Copper Cable, including cost and coveyance of all materials to site andlabour charges etc complete. (SD-198) |
| 39 | Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosureDouble door(Metal) with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB\"s should be with the ISI mark (like standard make) SD 179 |
| 40 | Construction of Platform bench made of 100mm to 80mm thick single piece black granite slab 2.00m long and 0.45 to 0.40m wide chamfered machine polished on top and all sides and machine cut at bottom, supported on 2 Nos. of 100mm to 80mm thick black granite slabs of 0.50 x 0.45 to 0.40m size with semi circular cuts at sides and fully polished on all sides above platform level placed vertically with 0.15m buried in concrete 1:3:6 mix below platform surface, connecting the top slab and supports rigidly to correct line, level details as shown in the relevant sketch including demolition of cement concrete, earthwork wherever necessary , disposing all debris away from site with all leads and lifts etc. complete and as directed. (All labour, material, tools and plants including CEMENT by Contractor) |
