Tender For Proposed Non Ssr Items For Palghar District Sports Complex Project At Dist - Palghar, palghar-Maharashtra

Proposed Non Ssr Items For Palghar District Sports Complex Project At Dist - Palghar , Item , Providing And Laying Cast In Situ / Ready Mix Cement Concrete M-40 Post Tensioning In Pt Slabs & Pt Beams For The Loading As Mentioned In Relevant Drawing As Per The Technical Specifications Including Decoiling The Strands, Cutting To The Required Lenghts, Supplying & Laying Of Ht Strands ( Tata Make ) , Sheating ( Gi Ducts ) , Jointing With Couplers & Inserting The Strands, Profiling, Fixing Live End Anchorages Including The Supply Of Stressing Anchorages, Grout Vents, Making Dead End Anchorages Including Flowering The Strands, Fixing Tendon Support Bars, Supervising The Fixing Of Anti-Bursting Reinforcement, Stressing The Cable End Trimming, Grouting The Cables With Cement Slurry Mixed With Approved Admixtures With Required Tools , Plants, Machineries & Consumables Etc. Including Demarcationon Soffit Of The Slab With 100 Wide Red Paint Indicating Cable Profiles, Including Obtaing Approval From Client / Consultant For The Work Doneof Trap / Granite / Quartzite / Gneiss Metal For R.C.C. Slabs And Landingsas Per Detailed Designs And Drawings Includingcentering , Formwork, Cover Blocks, Laying / Pumping, Compactionfinishing The Formed Surfaces With Cement Mortar 1:3 Of Sufficient Minimum Thickness To Give A Smooth And Even Surface Or Roughening If Special Finish Is To Be Provided And Curing Etc. Complete, ( Excluding Reinforcement And Structural Steel ) With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer / Concrete Batch Mixplant ( Pan Mixer ) Etc. Complete, With Fine Aggregate ( Crushed Sand V.S.I. Grade ) . Including , Providing, Supplying & Fixing On Site Glass Fibre Reinforced Polymer ( Gfrp ) Rebars In Lieu Of Tmt 500 Of Various Specified Diameters And Of Approved Make Conforming To Irc:137:2022 As Per Detailed Designs, Drawings & Schedules And Mounted On Plastic Clips / Knotting Wire Including All Material, Labour, Necessary Tools & Plants, Transportation, Stocking / Stacking, All Leads & Lifts, Taxes Except Gst, Loading & Unloading, Cleaning, Etc. Complete ( Item To Be Used Only In Concrete Roads, Storm Water Drains, Gutters, In Buildings For Plinth Level Pcc With Nominal Reinforcement Only ) - 4Mm , 6Mm , 7Mm , 8Mm , 10Mm , 12Mm , 14Mm , 16Mm , 18Mm , 20Mm , 22Mm , 25Mm , 32Mm , Providing & Fixing Door Frame Made Out Of 12Mm & 18Mm Bwp With Approved Mica Laminates Etc.Complete Item , Providing And Laying In Trenches 65 Mm Dai. Upvc Pipe Including Necessary Excavation, Fittings. Refilling Trenches Etc. Complete. Including Removing Existing Pipe Line If Necessary And Conveying And Stacking The Same Complete. , Providing And Laying In Trenches 80 Mm Dai. Upvc Pipe Including Necessary Excavation, Fittings. Refilling Trenches Etc. Complete. Including Removing Existing Pipe Line If Necessary And Conveying And Stacking The Same Complete. , Providing And Laying In Trenches 100 Mm Dai. Upvc Pipe Including Necessary Excavation, Fittings. Refilling Trenches Etc. Complete. Including Removing Existing Pipe Line If Necessary And Conveying And Stacking The Same Complete. , Providing And Laying In Trenches 150 Mm Dai. Upvc Pipe Including Necessary Excavation, Fittings. Refilling Trenches Etc. Complete. Including Removing Existing Pipe Line If Necessary And Conveying And Stacking The Same Complete. , Nssr Item For Plumbing Foot Ball Ground 1.22 Providing And Laying In Trenches 100 Mm Width Power Drain Belt Including Necessary Excavation, Fiittings. The Same Complete. , Providing And Laying In Trenches 80Mm Perforated Corrougated Pipe With Geo Fabric Including Necessary Excavation, Fiittings The Same Complete. , Nssr Item For Plumbing Boi-Disetor Phyatoride System Planed Bed Unit: The Planed Bed Works On The Principle Of Sequential Aerobic And Anoxic Treatment. This Unit Uses Novel Filling Media. The Planed Bed Is Sown With Semi-Aquatic, Aquatic, Ornamental, Flowering Species Of Plant, Where The Wastewater Flows In A Sinusoidal Manner To Achieve The Better Efficiency Of Treatment. This Unique Baffle And Wall Arrangement Increases The Contact Time With The Microbes And The Plant Roots And Provides Alternate Aerobic And Anoxic Phases In The Same Reactor Leading To Sbr, Mbbr Type Operations. In This Unit The Bed Is Filled With Different Size Filling Media And Wetland Plants Such As Colocasiaesculenta, Canna Indica, Yperusalternifolius, Etc. - 13 Kld Commercial Complex , 25Kld Admin Building , 90Kld Spectactor -01 , 90Kld Spectactor -02 , Nssr Item For Irrigation P / F 16Mm Main Lateral 4 Lph As Drip Line With Dripper As Per Specificatio Icluding Excaation, Laying & Other Necessary Work Complete , Providing And Fixing Adjustable Speed Of Rotating 0 To 65 Second. It Is Gear Driven, Sloted Grease Lubricated Gear Drive Poup Up Height 13 Cm Area Covered 32.5 To 46.3M Radius ( St-1600-Hs-B ) , Mp Rotator Sprinkler:- Multi-Stream, Multi-Trajectory Rotating Stream Sprinkler With Double Popup. In Full Or Part Circle Model Covering 2.5 Mtr To 9.4 Mtrradius At 2.5 Bar Pressure With An Equivalent Full Circlethe Adjustment Ring Shall Be Effective Only While The Sprinkler Is Popped Up And Shall Be Ineffective While The Sprinkler Is Popped Down. The Sprinkler Shall Be Fitted With A Detachable Filter. Installed On Popup Bodies Having A 4” Popup Male Threaded Stem With ½ Fipt Threaded Adapter. With Check Valve Sprinkler With 10 To 10.6 Mtr Radius. , 4 Pop Up Plastic Rotor : Heavy Duty Commercial Grade For Parks & Garden , 1 Female Inlet, Exposed Dia- 2, Discharge Rate - 1.59 To 6.4 Cumh. Radius Of Coverage 16 To 21 Mtrs. Recommended Pressure 3 Kg. / Sq.Cm To 6.9 Kg. / Sq.Cm., Nozzle Trajectory - 25 Deg. Small Exposed Heavy Duty Rubber Cover, Four Elbow Swing Joints & Check Valve. , 2 Or 4 Inch Pop Up Adjustable Rotor - Plastic : Heavy Duty Commercial Grade, 3 / 4 Female Inlet, Discharge Rate - 0.2 To 3.36 Cumh. Radius Of Coverage 8 M To 14.3 Mtrs. Recommended Pressure 2.1 Kg. / Sq.Cm To 4.8 Kg. / Sq.Cm., Nozzle Trajectory - 25 Deg. Integral Rubber Cover & With Four Elbow Swing Joint & Check Valve , Impact Pop Up 1 / 2 Female Inlet, Heavy Duty Plastic Adjustable Sprinkler 3.2 Mm. Nozzle & Plastic Heavy Duty Housing, Operating Pressure 2 Kgf To 4 Kgf. Flow= 570 To 810 Lph. With 4 Elbow Swing Joint. , Sst Manifold And Isolation Valve With Flexible Stainless Inlet Hose , Providing And Erecting Disc Filter : Is 12785 :- 30 M3 / Hr. Flow Capacity Plastic Ribbed Body Construction Manufactured From Plastic Alloy Material Withstanding Maximum Pressure Of 10 Kg. / Cm2. Bspt. 2 Male Threaded Standard End Connection. To Be Provided With Disc Filtration Element Of 100 Micron Size , Pvc Ball Valve 50Mm: Isi Marked Withstanding At Least 10 Kg. / Cm2 Pressure. , Air / Vacuum Release Valve 1”:- Plastic Rigid Pvc. Body Continuous Acting Air Release Valve During Start Up& Operation Of The System. Acts As Vacuum Breaker While Drain Off. 1” Bsp Male Threded End Connection. To Be Provided With Required Riser Assembly. Withstanding Maximum Line Pressure Of 10 Kg. / Cm2. With All Fittings , Providing Erecting 2.5 Glycerinefillled Pressure Gauge Etc . , Providing Erecting 50 Mm Dia6kg , 6 Rigid - Pvc Pipeisi Etc. Complete. , Providing Erecting 63 Mm X 6.0 Kg X 6 Mter Rigid -Pvc Pipe Isietc. Complete. , Providing Erecting Drip 63Mm Pvc Ball Valve Plane Type Etc. , Providing Erecting Flush Valve- 2 Mm Etc. , Valve Box And Accessories : Supplying And Erection Of Valve Box And There Accessories, Circular / Rectangular Model With Rugged Reinforced Plastic Constructionand Robust Top Cover With Non Slippery Grips And Provisions Of Snap Fit Type Locking Arrangement Including All Material Labour, Hydraulic Testing And Commissioning All Complete As Per The Direction Of Engineers In Charge. A ) 10 Round Valve Box - , B ) 6 Round Valve Box - , Providing And Fixing Service Saddle , Swing Joint :-½” X 30 Cm ( 12” ) Standard Swing Joint, 4 Swing Elbows , Pressure Release Valve 2.3 Kg / Cm2 To 8 Kg / Cm2 , Supply & Placing Of Geotextile Seperation Barrier To Cover The Entire Field Including The Edges. Geo Textile Barrier 220-225 Gsm , Garware Make Or Equivalent Make Nylon Mesh - [ 50Mm X 50Mm ] , 2.5Mm Thick , Part B-Sports Related Items Fixed Volleyball Post- Providing And Fixing Of Standard Volleyball Fixed Pole Pair Regular Model With Heavy Duty Ms Pipe, Height Adjustable For Juniors, Men Or Women Made Of 3X4 Pipe Epoxy Painted Comprises A Special Internal Ratchet System Comprises A Special Internal Ratchet System With Garware Tournament Quality Net ...Etc Comple And As Directed By Engineer In Charge , Supply And Installation Ofhaving Thickness Of 6Mm Comprising Of 4Mm Prefabricated Sbr Mat Followed By 2Mm Pu Coatings. Seamless, Non-Porous And Smooth Surface For Very Good Resiliency For Comfort, Injury Prevention, Sustainability Through High Content Of Recycled And Renewable Raw Materials In Combination With Lasting Performance Through Very Good Mechanical Strength, Wear Resistance And Easy Maintenance, Repair & Resurface Procedures. System Consist Ofsbr Matt Being Laid Using Two Component Pu Adhesive Followed By Sealer To Fill In All The Pores Of Sbr Mat, 2 Coats Of Pu Resin Layer Followed By Top Pu Coat And Game Line Marking...Etc Comple And As Directed By Engineer In Charge , Wrestling Matt-Supplying & Fixing Surface That Is Approved By World Taekwondo Federation ( Wtf ) . Material: Xpe, Leather With Pattern Technology Improvement: Low Ratio Xpe And Dedicated Leather With Pattern, Absorbing Energy, Great Performance Of Buffering, Excellent Breathability, Soft Surface; Compounded By Fire, Connected By Toothed Edge, More Stable.Etc Comple And As Directed By Engineer In Charge ( Tile Size Of 1M X 1M X 50Mm, Colour Options-Red, Blue, Yellow, Green ) , Judo Matt- Supplying & Fixing Surface That Is Approved By World Taekwondo Federation ( Wtf ) . Material: Xpe, Leather With Pattern Technology Improvement: Low Ratio Xpe And Dedicated Leather With Pattern Compounding To This New Model Mat. 8M Octagonal Competition Area Is Blue, Safety Area Is Red. Absorbing Energy, Great Performance Of Buffering, Excellent Breathability, Soft Surface; Compounded By Fire, Connected By Toothed Edge, More Stable. ( Tile Size Of 1M X 1M X 50Mm, Colour Options-Red, Blue, Yellow, Green ) , Supply And Installation Of European Origin Heterogeneous Sports Vinyl Flooring 6.7Mm Thickness With Sheet Width Not Less Than 2.0 Metre Width Jointed With Seamless Thermo Welding Laid With Suitable Premium Adhesive@ 0.25Kg / M2 Over Suitable Subbase, Conforming To Manufacturers Specifications Including Line Marking For The Specific Sports Area ( Basketball Court, Badminton Court, Tennis Court & Gymnasium Etc., ) With 2C Polyurethane / Epoxy Marker Paint Of Approved Quality And As Directed By The Engineer-In-Charge. The Sports Flooring Shall Be ( I ) Bacterial Resistant, ( Ii ) Thermo Welding Of Joints Of Flooring Shall Be By Heat Process To Make Seamless Floor Finish, ( Iii ) The Joints In The Flooring Shall Be Sealed By Using A Pvc Welding Bar Of Matching Colour Using Hot Air Gun. The Product Shall Be Floor Score, Fiba, Bwf & Ihf Certified, Its Bwf Certification Shall Be Of Grade-1 ( Bwf International Elite ) . Product Should Have Been Installed In Top Institute Of India I.E. Iit, Nit Or Equivalent. Technical Standards Of Product Are As Per Following; Surface Finish : Xpur Scuff-Resistant Surface, Backing: Combined Closed Cell Foam, Weight: 3.6 Kg / M2 As Per En-Iso-23997 Standards, Roll Size: 2 Meter Width X 15 Meter Length ± 1%, Product Specification Should Fall Under En 14904 ( Category P1 ) , Impact Sound Insulation: 22 Db As Per En Iso717-2 Standards Thermal Resistance: 0.07 M2-K / W, Reaction To Fire: C-Fls1, Formaldehyde Emission: No Formaldehyde , Pentachlorophenol: No Pentachlorophenol, Friction: 80-110 As Per En 13036-4 Standards, Shock Absorption: >25% En-14808 , Vertical Deformation: 1.08Mm En 14809, Ball Rebound: 97% As Per En 12235, Specular Gloss: < 30 As Per En 2813, Dimensional Stability: ± 0.2% En Iso 23999, Indentation Resistance: <0.5Mm En 1516, Resistance To Rolling Load: 1500 N As Per En 1569, Colour Fastness: 6 Iso 105 B02, Chemical Resistance: No Change Eniso 26987, Abrasion Resistance: < 250 Mg / 1000Cycles As Per En Iso 5470-1 Standards And Product Is Solvent And Heavy Metal Free.....Etc Complete , Supply And Installation Of European Origin Heterogeneous Sports Vinyl Flooring 6.7Mm Thickness With Sheet Width Not Less Than 2.0 Metre Width Jointed With Seamless Thermo Welding Laid With Suitable Premium Adhesive@ 0.25Kg / M2 Over Suitable Subbase, Conforming To Manufacturers Specifications Including Line Marking For The Specific Sports Area ( Basketball Court, Badminton Court, Tennis Court & Gymnasium Etc., ) With 2C Polyurethane / Epoxy Marker Paint Of Approved Quality And As Directed By The Engineer-In-Charge. The Sports Flooring Shall Be ( I ) Bacterial Resistant, ( Ii ) Thermo Welding Of Joints Of Flooring Shall Be By Heat Process To Make Seamless Floor Finish, ( Iii ) The Joints In The Flooring Shall Be Sealed By Using A Pvc Welding Bar Of Matching Colour Using Hot Air Gun. The Product Shall Be Floor Score, Fiba, Bwf & Ihf Certified, Its Bwf Certification Shall Be Of Grade-1 ( Bwf International Elite ) . Product Should Have Been Installed In Top Institute Of India I.E. Iit, Nit Or Equivalent. Technical Standards Of Product Are As Per Following; Surface Finish : Xpur Scuff-Resistant Surface, Backing: Combined Closed Cell Foam, Weight: 3.6 Kg / M2 As Per En-Iso-23997 Standards, Roll Size: 2 Meter Width X 15 Meter Length ± 1%, Product Specification Should Fall Under En 14904 ( Category P1 ) , Impact Sound Insulation: 22 Db As Per En Iso717-2 Standards Thermal Resistance: 0.07 M2-K / W, Reaction To Fire: C-Fls1, Formaldehyde Emission: No Formaldehyde , Pentachlorophenol: No Pentachlorophenol, Friction: 80-110 As Per En 13036-4 Standards, Shock Absorption: >25% En-14808 , Vertical Deformation: 1.08Mm En 14809, Ball Rebound: 97% As Per En 12235, Specular Gloss: < 30 As Per En 2813, Dimensional Stability: ± 0.2% En Iso 23999, Indentation Resistance: <0.5Mm En 1516, Resistance To Rolling Load: 1500 N As Per En 1569, Colour Fastness: 6 Iso 105 B02, Chemical Resistance: No Change Eniso 26987, Abrasion Resistance: < 250 Mg / 1000Cycles As Per En Iso 5470-1 Standards And Product Is Solvent And Heavy Metal Free. , Supply And Installation Of European Origin, Fiba, Bwf & Ihf Certified, Point Elastic Polyurethane Flooring Pulastic Classic 110 Having Thickness Of 11Mm Comprising Of 9Mm Prefabricated Sbr Mat Followed By 2Mm Pu Coatings. Seamless, Non-Porous And Smooth Surface For Very Good Resiliency For Comfort, Injury Prevention, Sustainability Through High Content Of Recycled And Renewable Raw Materials In Combination With Lasting Performance Through Very Good Mechanical Strength, Wear Resistance And Easy Maintenance, Repair & Resurface Procedures. System Consist Ofsbr Matt Being Laid Using Two Component Pu Adhesive Followed By Sealer To Fill In All The Pores Of Sbr Mat, 2 Coats Of Pu Resin Layer Followed By Top Pu Coat And Game Line Marking. Product Should Meet European Standards En-14904 - P1 Category, Shock Absorption: 28% As Per En 14808, Vertical Deformation: 1.4Mm As Per En 14809, Friction Value According To En 13036-4 Should Be On Or Above 107, Ball Bounce: 98% According To En 12235, Gloss: 5% As Per En 2813, Resistance To Rolling Load: = 1500 N As Per En 1569, Resistance To Impact: = 800 Gr @ 10°C & = 1200 Gr @ 23°C As Per En 1517, Resistance To Indentation: 0, 35 Mm @ 5 Min & 0, 15 Mm @ 24 Hrs As Per En 1516, Resistance To Wear: < 340 Mg As Per En Iso 5470, Flammability: Bfl-S2 As Per En 13501-1, Improvement Impact Sound Insulation ( ?Lw ) : 21Db According To Iso 717-2, V.O.C. Content – Adhesive / Resins Solvent Free, Resin Composition Free Of Solvents And Heavy Metals, Elongation At Break: Structure 150 % As Per Din 53455, Tensile Strength: Structure 8 N / Mm² According To Din 53455, Tear Strength: Structure 25 N / Mm According To Din 53515. Consumption Of Materials Has Be As Per Standards Which Is 0.90Kg / Sqm Adhesive For Sbr Matt, 0.5Kg / Sqm Sealer, 2.8Kg / Sqm Pu Wear Coating Followed By 0.14Kgsqm Top Pu Color Coat. Product Should Be Manufactured Under Iso 9001 For Quality Management , Iso 14001 For Environmental Care And Iso 26000 For Corporate Sustainability. , Moveable Football Goal Post-Competition ( Professional ) -*Made With Branded High Quality Ms Steelnpipe In 4 Dia *Junior Football Goal Post *Branded Epoxy Paint *Rust & Corrosion Free *Zero Vibration *Size Options: 24X8 With 1.5 Back Support. *The Poles Comprise Wheels Which Make It Easy To Move , Providing And Laying Geotextiles Sheet Permeable Nonwoven 250 Gsm Four Metre Roll Width & 100 Metre Length. , Providing And Laying Iaaf Approved Synthetic Athletics Track ( Maroon Colour ) Full Pur System Minimum 15Mm Thick Iaaf Certified System Including Line Marking And Attaining Class I Certificatin From World Athletic Federation.The World Athletic Federation Certificate Must Mention The Thickness Of The Product Which Should Be Minimum 15Mm As Per The Certificate, The Product Must Be Free Of Volatile Organic Compound ( Report Should Be Attached With The Specs ) .Full Pur System Duly World Athletic Federation Certified, Spread With Sbr ( Recycled Rubber ) In First 2 Layers And Coloured Epdm Granules In Final Layer Must Be Water Impermiable Layer Consist Of Bound Sub Base ( Closed Asphalt ) , For Rubber Granules 1-4 Mm Fixed With A Cast Coating 5 Mm Per Layer & Structured Cast Coating 3-5 Mm Spread With Epdm 1-4 Mm.System Should Fullfill The Following Properties - Water Impermiable, PoreFilled, Self Leveling, Jointless, Granulated Surface For Anti Slip Properties Can Handle Constant Stresses By Spikes, Dynamic Elasticity, Excellent Appearance & Colours, Including Markings On The Surface All Complete As Per Requirements / Specifications Laid Down By World Athletic Federation & Class 1 Certification As Per Iaaf. ( I ) Normal Stress Areas With A Minimum Thickness Of 15 Mm Of Finished Tracksurface. , ( Ii ) High Stress Areas With A Minimum Thickness Of 20 Mm Of Finished Tracksurface. , ( Iii ) High Stress Areas With A Minimum Thickness Of 25 Mm Of Finished Track Surface , Discus Throwing Circle -Aluminium ( Aluminium Discus Circle Made Of Heavy Duty Aluminium. This Can Be Folded In 2 Parts For Easy Transportation. Iaaf Certified ) , Discus Throwing Cage ( Pole Vault Inlay & Cover ( Made Of Heavy Duty 92 Mm Square Steel Tube, Hot Galvanized For Long Life. Poles Can Be Detached From Centre For Easy Transportation And Hinged For Easy Lifting During Installation. All Poles Are Bound Together With The Help Of Tie Bars For Sturdiness Of The Cage. Machine Knitted 5 Mm Thick Net With Square Mesh Of Size 40 Mm. Net Is Uv Stabilized For Long Life. Steel Tube Is Used On The Top Of The Net To Avoid Sagging.Cage With Netting, Iaaf Certified ) , Hammer Throwing Circle - Aluminium ( Made Of Thick Aluminium Alloy In Angle Type Construction. Constructed In Two Halves. Best Quality Nickel Plated Hardware Used For Assembling The Unit. Easy To Assemble And Can Be Folded Very Easily For Convenient Transportation & Storage.Iaaf Certified ) , Discus And Hammer Throwing Cage ( Made Of Heavy Duty 100 Mm Square Steel Tube, Hot Galvanized For Long Life. Poles Can Be Detached From Centre For Easy Transportation And Hinged For Easy Lifting During Installation. Easy To Bind The Poles Together With The Help Of Tie Bars For Sturdiness Of The Cage. Gates Are Attached To The Poles Using Four Hinges And Both Gates Include Wheels For Easy Movement. Net Is5 Mm Thick ( Machine Knitted ) With 40 Mmsquare Mesh. Net Is Uv Stabilized For Long Life. Steel Tube Is Used On The Top Of The Net To Avoid Sagging. Iaaf Certified Cage With Netting ) , Shot Put Throwing Circle - Aluminium ( Made Of Thick Aluminium Alloy In Angle Type Construction. Constructed In Two Halves. Best Quality Nickel Plated Hardware Used For Assembling The Unit. Easy To Assemble And Can Be Folded Very Easily For Convenient Transportation & Storage.Iaaf Certified ) , Take-Off Board System ( Latest Design Take-Off Board System, Made Of Solid Wood. Welded Aluminium Tray Protects Take-Off Area And Facilitates Easy Replacements Of Take-Off Board And Plasticine Board. Comes With Heavy Construction Aluminium Blanking Lid For Durability.Iaaf Certified ) , Triple Jump Take-Off Board System ( Stop Board Made Of Fibre Designed For Depressed Pad.Iaaf Certified ) , Fibre Stop Board - Competition ( Stop Board Made Of Fibre Designed For Depressed Pad.Iaaf Certified ) , Water Barriers ( Heavy Duty Foldable Beam Made Square Pipe Inside & Covered With Thick Water Proof Solid Plywood. Base Legs & Base Made Of Steel Square Pipe With Spring Loaded Snap Lock System For Easy Adjustment Of Three Different Required Heights. 762M.M. , 838M.M. , 914 M.M. Legs Are Fitted Into Sockets Grouted In To The Ground. Painted With Premium Quality Poly Urethane Paint For Longer Life & Durability. Easy To Install & Foldable To Transport.Iaaf Certified ) , Pole Vault Box - Competition ( Welded Stainless Steel Construction. Comes With Blanking Board Made Of Aluminium. Sockets At Bottom For Drainage Of Water.Iaaf Certified ) , Track Kerbing ( Heavy Gauge Aluminium Features A Box Profile Top. Held In Place By 10 Mm Tall Ribbed Feet. Raised 10 Mm Off The Track Surface For Rapid Drainage. Each Section Of Kerbing Is Milled To Allow Easy Drop In Or Removal Of Corresponding Sections. Available In Raw Or Anodized Finish. Iaaf Certified ) , Construction Of Various Play Courts ( I, E, Volley Ball, Kho Kho, Kabbadi, Etc ) As Per Detailed Drawing And Direction Of Engineer-In-Charge Consisiting Of Various Layers I.E. 150Mm Thick Compacted Rubble Soling, 50Mm Thick Hard Murum Layer, 100Mm Thk 1 Layer Of Brick On Edge Including Filling Gaps In Sinders Of Brick Bats, 30Mm Thk , Loose 20Mm Thk Compacted Mother Soil ( Including 30% Black Soil, 40% Sand, 30% Garden Soil, Including Screening In 6Mm Jali & Laying In Layer By Layer With Rolling By Light Roller ) Including Compacting And Curing And Even And Well Levelled Surface To Be Given With Wet Lime Marking And All Other Relevant Details As Per Above Said Norms Etc. Complete. , Construction Of Sand Filling In Jumping Pits, Including Cost And Conveyance Of All Materials And Labour Charges To The Site To Fill The Sand In Pits And Complete Finished Item As Per Drawing And As Directed By Engineer-InCharge. , Construction Of Steeplecase Pit Insided Portion As Per Iaaf Drawingand As Directed By Engineer-In-Charge , Supplying & Laying Of Artificial Turf For Football:-Proviiding, Supplying & Installing On Site Extreme Wear Resistant Football Turf With Expected Life Of 10-12 Years. Product Should Pass 60, 000 Cycles Of Lisport Xl Test ( Highest For Any Sports Turf In India Currently ) Of Hero Make Or Equivalent. Berlin Hero 18, 000 Dtex, Pile Height 50Mm, 18, 000 Dtex, Double Pp + Pu Backing + Mesh, 14 / 10Cm Stitches, Density 8820, Roll Size 4M X 30M Or As Specified, Diamond Shape Grass. Fifa Licensee Supplier Product. Roll Size 4M X 30M Or As Specified, Warrantee Upto 8 Years, Product Passes 60, 000 Cycles In Lisport Xl Test.

Refer document

Refer document

Refer document

Name of Work: Proposed Non SSR Items for Palghar District Sports Complex Project at Dist - Palghar

Sl. No.	Item Description
1	Item
2	Providing and laying Cast in situ/ Ready Mix cement concrete M-40 post tensioning in PT slabs & PT Beams for the loading as mentioned in relevant drawing as per the technical specifications including decoiling the strands,cutting to the required lenghts, supplying & laying of HT strands(Tata Make),sheating (GI ducts), jointing with couplers & inserting the strands,profiling, fixing live end anchorages including the supply of stressing anchorages, grout vents,making dead end anchorages including flowering the strands,fixing tendon support bars,supervising the fixing of anti-bursting reinforcement, stressing the cable end trimming, grouting the cables with cement slurry mixed with approved admixtures with required tools ,plants,machineries & consumables etc. including demarcationon soffit of the slab with 100 wide red paint indicating cable profiles,including obtaing approval from client/consultant for the work doneof trap/ granite/ quartzite/ gneiss metal for R.C.C. Slabs and Landingsas per detailed designs and drawings includingcentering , formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). Including
3	Providing, Supplying & fixing on site GLASS FIBRE REINFORCED POLYMER (GFRP) REBARS in lieu of TMT 500 of various specified diameters and of approved make conforming to IRC:137:2022 as per detailed designs, drawings & schedules and mounted on plastic clips / knotting wire including all material, labour, necessary tools & plants, transportation, stocking / stacking, all leads & lifts, taxes except GST, loading & unloading, cleaning, etc. complete (item to be used only in concrete roads, storm water drains, gutters, in buildings for plinth level pcc with nominal reinforcement only) - 4mm
4	6mm
5	7mm
6	8mm
7	10mm
8	12mm
9	14mm
10	16mm
11	18mm
12	20mm
13	22mm
14	25mm
15	32mm
16	Providing & Fixing Door Frame made out of 12mm & 18mm BWP with Approved Mica Laminates etc.complete item
17	Providing and laying in trenches 65 mm dai. Upvc pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same complete.
18	Providing and laying in trenches 80 mm dai. Upvc pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same complete.
19	Providing and laying in trenches 100 mm dai. Upvc pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same complete.
20	Providing and laying in trenches 150 mm dai. Upvc pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same complete.
21	NSSR ITEM FOR PLUMBING FOOT BALL GROUND 1.22 Providing and laying in trenches 100 mm width Power Drain Belt including necessary excavation, fiittings. the same complete.
22	Providing and laying in trenches 80mm Perforated Corrougated Pipe with Geo Fabric including necessary excavation, fiittings the same complete.
23	NSSR ITEM FOR PLUMBING BOI-DISETOR PHYATORIDE SYSTEM Planed bed Unit: The Planed bed works on the principle of sequential aerobic and anoxic treatment. This unit uses novel filling media. The Planed Bed is sown with semi-aquatic, aquatic, ornamental, flowering species of plant, where the wastewater flows in a sinusoidal manner to achieve the better efficiency of treatment. This unique baffle and wall arrangement increases the contact time with the microbes and the plant roots and provides alternate aerobic and anoxic phases in the same reactor leading to SBR,MBBR type operations. In this unit the bed is filled with different size filling media and wetland plants such as Colocasiaesculenta, Canna indica, yperusalternifolius, etc. - 13 kld commercial complex
24	25kld admin building
25	90kld spectactor -01
26	90kld spectactor -02
27	NSSR ITEM FOR IRRIGATION P/F 16mm main lateral 4 LPH as drip line with dripper as per specificatio icluding excaation, laying & other necessary work complete
28	Providing and fixing adjustable speed of rotating 0 to 65 second. It is gear driven, sloted grease lubricated gear drive Poup up height 13 cm area covered 32.5 to 46.3m radius(ST-1600-HS-B)
29	MP Rotator Sprinkler:- Multi-stream, multi-trajectory rotating stream sprinkler with double popup. In full or part circle model covering 2.5 mtr to 9.4 Mtrradius at 2.5 Bar pressure with an equivalent full circleThe adjustment ring shall be effective only while the sprinkler is popped up and shall be ineffective while the sprinkler is popped down. The sprinkler shall be fitted with a detachable filter. Installed on popup bodies having a 4” popup male threaded stem with ½ FIPT threaded adapter. With Check Valve Sprinkler with 10 TO 10.6 Mtr radius.
30	4" pop up Plastic Rotor : heavy duty commercial grade for parks & garden , 1" female inlet, exposed dia- 2", discharge rate - 1.59 to 6.4 cumh. radius of coverage 16 to 21 mtrs. recommended pressure 3 kg./sq.cm to 6.9 kg./sq.cm., nozzle trajectory - 25 deg. small exposed heavy duty rubber cover, four elbow swing joints & check valve.
31	2" OR 4 inch pop up Adjustable Rotor - plastic : heavy duty commercial grade, 3/4" female inlet, discharge rate - 0.2 to 3.36 cumh. radius of coverage 8 m to 14.3 mtrs. recommended pressure 2.1 kg./sq.cm to 4.8 kg./sq.cm., nozzle trajectory - 25 deg. integral rubber cover & with four elbow swing joint & check valve
32	Impact pop up 1/2" female inlet, heavy duty plastic adjustable sprinkler 3.2 mm. nozzle & plastic heavy duty housing, operating pressure 2 kgf to 4 kgf. flow= 570 to 810 lph. with 4 elbow swing joint.
33	Sst manifold and Isolation valve with flexible stainless inlet hose
34	Providing and erecting Disc Filter : IS 12785 :- 30 m3/hr. flow capacity plastic ribbed body construction manufactured from plastic alloy material withstanding maximum pressure of 10 kg./cm2. BSPT. 2" male threaded standard end connection. To be provided with disc filtration element of 100 micron size
35	PVC Ball Valve 50MM: ISI marked withstanding at least 10 kg./cm2 pressure.
36	Air/Vacuum Release valve 1”:- Plastic rigid PVC. Body continuous acting air release valve during start up& operation of the system. Acts as vacuum breaker while drain off. 1” BSP male threded end connection. To be provided with required riser assembly. Withstanding maximum line pressure of 10 kg./cm2. with all fittings
37	Providing erecting 2.5 " Glycerinefillled pressure Gauge etc .
38	Providing erecting 50 mm dia6kg , 6 Rigid - PVC pipeISI etc. complete.
39	Providing erecting 63 mm x 6.0 Kg x 6 Mter Rigid -PVC pipe ISIetc. complete.
40	Providing erecting Drip 63mm PVC Ball Valve plane type etc.
41	Providing erecting flush Valve- 2" mm etc.
42	Valve Box and accessories : Supplying and erection of Valve box and there accessories, circular/ rectangular model with rugged reinforced plastic constructionand robust top cover with non slippery grips and provisions of snap fit type locking arrangement including all material labour, hydraulic testing and commissioning all complete as per the direction of engineers in charge. A) 10" Round Valve Box -
43	B) 6" Round Valve Box -
44	Providing and Fixing Service saddle
45	Swing Joint :-½” X 30 CM (12”) STANDARD SWING JOINT, 4 SWING ELBOWS
46	Pressure release valve 2.3 Kg/ cm2 to 8 kg/ cm2
47	Supply & Placing of Geotextile Seperation Barrier to cover the entire field including the edges. Geo textile Barrier 220-225 GSM
48	Garware Make or Equivalent Make Nylon Mesh - [50mm x 50mm], 2.5mm thick
49	PART "B"-SPORTS RELATED ITEMS FIXED VOLLEYBALL POST- Providing and fixing of Standard Volleyball fixed pole pair regular model with heavy duty MS pipe,Height Adjustable for Juniors, Men or Women Made of 3"x4" Pipe Epoxy Painted Comprises a Special Internal Ratchet System Comprises a Special Internal Ratchet System With Garware Tournament Quality Net ...etc comple and as directed by engineer in charge
50	Supply and Installation ofhaving thickness of 6mm comprising of 4mm Prefabricated SBR Mat followed by 2mm PU Coatings. Seamless, non-porous and smooth surface for Very good resiliency for comfort, injury prevention, Sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. System consist ofSBR Matt being laid using two component PU Adhesive followed by Sealer to fill in all the pores of SBR mat,2 coats of PU Resin Layer followed by Top PU Coat and game line marking...etc comple and as directed by engineer in charge
51	Wrestling Matt-Supplying & Fixing Surface that is Approved by World Taekwondo Federation (WTF). Material: XPE, Leather with pattern Technology improvement: Low ratio XPE and dedicated leather with pattern, Absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable.etc comple and as directed by engineer in charge (Tile size of 1M X 1M X 50MM, colour options-Red, blue, yellow, green)
52	Judo Matt- Supplying & Fixing Surface that is Approved by World Taekwondo Federation (WTF). Material: XPE, Leather with pattern Technology improvement: Low ratio XPE and dedicated leather with pattern compounding to this new Model mat. 8m octagonal competition area is blue, safety area is red. Absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable. (Tile size of 1M X 1M X 50MM, colour options-Red, blue, yellow, green)
53	Supply and Installation of European Origin Heterogeneous Sports Vinyl Flooring 6.7mm Thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with Suitable Premium adhesive@ 0.25kg/m2 over suitable subbase, conforming to manufacturer"s specifications including line marking for the specific sports area (Basketball Court, Badminton Court, Tennis Court & Gymnasium etc.,) with 2C polyurethane/ epoxy marker paint of approved quality and as directed by the Engineer-in-charge. The sports flooring shall be (i) Bacterial resistant, (ii) Thermo welding of joints of flooring shall be by heat process to make seamless floor finish, (iii) The joints in the flooring shall be sealed by using a PVC welding bar of matching colour using hot air gun. The Product shall be Floor Score, FIBA, BWF & IHF Certified, its BWF Certification shall be of Grade-1 (BWF International Elite). Product should have been installed in Top institute of India i.e. IIT, NIT or equivalent. Technical Standards of Product are as per following; Surface Finish : XPUR scuff-resistant surface, Backing: Combined closed cell foam, Weight: 3.6 kg/m2 as per EN-ISO-23997 Standards, Roll Size: 2 Meter Width x 15 Meter Length ± 1%, Product Specification should fall under EN 14904(category P1), Impact sound insulation: 22 dB as per EN ISO717-2 Standards Thermal resistance: 0.07 m2-K/W, Reaction to fire: C-fls1, Formaldehyde emission: No formaldehyde , Pentachlorophenol: No pentachlorophenol, Friction: 80-110 as per EN 13036-4 Standards, Shock absorption: >25% EN-14808 , Vertical deformation: 1.08mm EN 14809, Ball rebound: 97% as per EN 12235, Specular gloss: < 30 as per EN 2813, Dimensional stability: ± 0.2% EN ISO 23999, Indentation resistance: <0.5mm EN 1516, Resistance to rolling load: 1500 N as per EN 1569, Colour fastness: 6 ISO 105 B02, Chemical resistance: no change ENISO 26987, Abrasion resistance: < 250 mg/1000cycles as per EN ISO 5470-1 Standards and product is Solvent and heavy metal free.....etc complete
54	Supply and Installation of European Origin Heterogeneous Sports Vinyl Flooring 6.7mm Thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with Suitable Premium adhesive@ 0.25kg/m2 over suitable subbase, conforming to manufacturer"s specifications including line marking for the specific sports area (Basketball Court, Badminton Court, Tennis Court & Gymnasium etc.,) with 2C polyurethane/ epoxy marker paint of approved quality and as directed by the Engineer-in-charge. The sports flooring shall be (i) Bacterial resistant, (ii) Thermo welding of joints of flooring shall be by heat process to make seamless floor finish, (iii) The joints in the flooring shall be sealed by using a PVC welding bar of matching colour using hot air gun. The Product shall be Floor Score, FIBA, BWF & IHF Certified, its BWF Certification shall be of Grade-1 (BWF International Elite). Product should have been installed in Top institute of India i.e. IIT, NIT or equivalent. Technical Standards of Product are as per following; Surface Finish : XPUR scuff-resistant surface, Backing: Combined closed cell foam, Weight: 3.6 kg/m2 as per EN-ISO-23997 Standards, Roll Size: 2 Meter Width x 15 Meter Length ± 1%, Product Specification should fall under EN 14904(category P1), Impact sound insulation: 22 dB as per EN ISO717-2 Standards Thermal resistance: 0.07 m2-K/W, Reaction to fire: C-fls1, Formaldehyde emission: No formaldehyde , Pentachlorophenol: No pentachlorophenol, Friction: 80-110 as per EN 13036-4 Standards, Shock absorption: >25% EN-14808 , Vertical deformation: 1.08mm EN 14809, Ball rebound: 97% as per EN 12235, Specular gloss: < 30 as per EN 2813, Dimensional stability: ± 0.2% EN ISO 23999, Indentation resistance: <0.5mm EN 1516, Resistance to rolling load: 1500 N as per EN 1569, Colour fastness: 6 ISO 105 B02, Chemical resistance: no change ENISO 26987, Abrasion resistance: < 250 mg/1000cycles as per EN ISO 5470-1 Standards and product is Solvent and heavy metal free.
55	Supply and Installation of European Origin, FIBA, BWF & IHF Certified, Point Elastic polyurethane Flooring "Pulastic Classic 110" having thickness of 11mm comprising of 9mm Prefabricated SBR Mat followed by 2mm PU Coatings. Seamless, non-porous and smooth surface for Very good resiliency for comfort, injury prevention, Sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. System consist ofSBR Matt being laid using two component PU Adhesive followed by Sealer to fill in all the pores of SBR mat,2 coats of PU Resin Layer followed by Top PU Coat and game line marking. Product should meet European standards EN-14904 - P1 category, Shock Absorption: 28% as per EN 14808, Vertical Deformation: 1.4mm as per EN 14809, Friction value according to EN 13036-4 should be on or above 107, Ball Bounce: 98% according to EN 12235, Gloss: 5% as per EN 2813, Resistance to Rolling Load: = 1500 N as per EN 1569, Resistance to impact: = 800 gr @ 10°C & = 1200 gr @ 23°C as per EN 1517, Resistance to indentation: 0,35 mm @ 5 min & 0,15 mm @ 24 hrs as per EN 1516, Resistance to wear: < 340 mg as per EN ISO 5470, Flammability: Bfl-S2 as per EN 13501-1, Improvement impact sound insulation (?Lw): 21dB according to ISO 717-2, V.O.C. content – adhesive/resins Solvent free, Resin composition Free of solvents and heavy metals, Elongation at break: structure 150 % as per DIN 53455, Tensile strength: structure 8 N/mm² according to DIN 53455, Tear strength: structure 25 N/mm according to DIN 53515. Consumption of materials has be as per standards which is 0.90Kg/sqm Adhesive for SBR Matt, 0.5Kg/sqm Sealer, 2.8Kg/sqm PU Wear Coating followed by 0.14Kgsqm Top PU Color Coat. Product should be manufactured under ISO 9001 for quality management , ISO 14001 for environmental care and ISO 26000 for corporate sustainability.
56	Moveable Football Goal Post-Competition (Professional)-*Made with branded high quality MS steelnpipe in 4" dia *Junior Football Goal Post *Branded Epoxy Paint *Rust & Corrosion Free *Zero Vibration *Size options: 24"x8" with 1.5" back support. *The Poles Comprise wheels which make it easy to move
57	Providing and laying Geotextiles sheet permeable nonwoven 250 GSM four metre roll width & 100 metre length.
58	Providing and laying IAAF Approved Synthetic Athletics Track (Maroon COLOUR) FULL PUR system minimum 15mm thick IAAF certified system including line marking and attaining class I certificatin from World Athletic Federation.The World Athletic Federation certificate must mention the thickness of the product which should be minimum 15mm as per the certificate, the product must be free of Volatile Organic compound (report should be attached with the specs).FULL PUR System duly World Athletic Federation certified, spread with SBR (recycled rubber) in first 2 layers and coloured EPDM Granules in final layer must be water impermiable layer consist of bound sub base (closed asphalt), for rubber granules 1-4 mm fixed with a cast coating 5 mm per layer & structured cast coating 3-5 mm SPREAD WITH EPDM 1-4 MM.System should fullfill the following properties - Water impermiable, Porefilled, self leveling, jointless, granulated surface for anti slip properties can handle constant stresses by spikes, dynamic elasticity, excellent appearance & colours, including markings on the surface all complete as per requirements/ specifications laid down by World Athletic Federation & Class 1 certification as per IAAF. (i) Normal Stress Areas with a minimum thickness of 15 mm of finished TrackSurface.
59	(ii) High Stress Areas with a minimum thickness of 20 mm of finished TrackSurface.
60	(iii) High Stress Areas with a minimum thickness of 25 mm of finished Track Surface
61	DISCUS THROWING CIRCLE -ALUMINIUM (Aluminium Discus Circle made of heavy duty aluminium. This can be folded in 2 parts for easy transportation. IAAF Certified)
62	DISCUS THROWING CAGE (Pole vault inlay & cover (Made of heavy duty 92 mm Square Steel Tube, HOT GALVANIZED for long life. Poles can be detached from centre for easy transportation and hinged for easy lifting during installation. All poles are bound together with the help of tie bars for sturdiness of the cage. Machine knitted 5 mm thick net with square mesh of size 40 mm. Net is UV stabilized for long life. Steel tube is used on the top of the net to avoid sagging.Cage with Netting,IAAF Certified)
63	HAMMER THROWING CIRCLE - ALUMINIUM (Made of thick Aluminium alloy in angle type construction. Constructed in two halves. Best quality nickel plated hardware used for assembling the unit. Easy to assemble and can be folded very easily for convenient transportation & storage.IAAF Certified )
64	DISCUS AND HAMMER THROWING CAGE (Made of heavy duty 100 mm Square Steel Tube, HOT GALVANIZED for long life. Poles can be detached from centre for easy transportation and hinged for easy lifting during installation. easy to bind the poles together with the help of tie bars for sturdiness of the cage. Gates are attached to the poles using four hinges and both gates include wheels for easy movement. NET is5 mm thick( Machine Knitted )with 40 mmsquare mesh. Net is UV stabilized for long life. Steel tube is used on the top of the net to avoid sagging. IAAF Certified Cage with Netting)
65	SHOT PUT THROWING CIRCLE - ALUMINIUM (Made of thick Aluminium alloy in angle type construction. Constructed in two halves. Best quality nickel plated hardware used for assembling the unit. Easy to assemble and can be folded very easily for convenient transportation & storage.IAAF Certified)
66	Take-off Board System (Latest design take-off board system, made of solid wood. Welded aluminium tray protects take-off area and facilitates easy replacements of take-off board and plasticine board. Comes with heavy construction aluminium blanking lid for durability.IAAF Certified )
67	Triple Jump Take-off Board System (Stop board made of fibre designed for depressed pad.IAAF Certified)
68	Fibre Stop Board - Competition (Stop board made of fibre designed for depressed pad.IAAF Certified)
69	Water Barriers (Heavy duty foldable beam made square Pipe inside & covered with thick Water proof solid plywood. Base legs & base made of steel square pipe with spring loaded snap lock system for easy adjustment of three different required heights. 762m.m. , 838m.m. , 914 m.m. Legs are fitted into sockets grouted in to the ground. Painted with premium quality Poly urethane paint for longer life & durability. Easy to install & foldable to transport.IAAF Certified)
70	Pole Vault Box - Competition (Welded stainless steel construction. Comes with blanking board made of aluminium. Sockets at bottom for drainage of water.IAAF Certified)
71	TRACK KERBING (Heavy gauge aluminium features a box profile top. Held in place by 10 mm tall ribbed feet. Raised 10 mm off the track surface for rapid drainage. Each section of kerbing is milled to allow easy drop in or removal of corresponding sections. Available in Raw or anodized finish. IAAF Certified)
72	Construction of various play courts (I,e, Volley ball, kho kho, Kabbadi, etc) as per detailed drawing and direction of Engineer-in-charge consisiting of various layers I.e. 150mm thick compacted rubble soling, 50mm thick Hard Murum layer, 100mm thk 1 layer of Brick on edge including filling gaps in sinders of Brick bats, 30mm thk , loose 20mm thk compacted mother soil (including 30% black soil, 40% sand, 30% garden soil, including screening in 6mm jali & laying in layer by layer with rolling by light roller) including compacting and curing and even and well levelled surface to be given with wet lime marking and all other relevant details as per above said norms etc. complete.
73	Construction of Sand filling in jumping pits, including cost and conveyance of all materials and labour charges to the site to fill the sand in pits and complete finished item as per drawing and as directed by Engineer-inCharge.
74	Construction of Steeplecase pit insideD portion as per IAAF drawingand as directed by Engineer-in-Charge
75	SUPPLYING & LAYING OF ARTIFICIAL TURF FOR FOOTBALL:-Proviiding, Supplying & Installing on site Extreme Wear Resistant Football Turf with expected life of 10-12 years. Product should pass 60,000 cycles of Lisport XL Test (Highest for any sports turf in india currently) of HERO make or equivalent. Berlin Hero 18,000 dtex, Pile Height 50mm, 18,000 dtex, Double Pp + PU Backing + Mesh, 14/10cm stitches, Density 8820, Roll size 4m x 30m or as specified, Diamond shape Grass. FIFA Licensee Supplier product. Roll Size 4m x 30m or as specified, Warrantee upto 8 years, Product passes 60,000 cycles in LISPORT XL Test.