Tender For Sic Of E&M Equipment At Sector A-10 Pocket 7 Narea Tube Wellin Ac-01, Delhi-Delhi

Tender For Sic Of E&M Equipment At Sector A-10 Pocket 7 Narea Tube Wellin Ac-01-Supply Of 7.5 Hp Submersible Pump Set Fitted With Dynamically Balanced Impeller Mounted On Stainless Steel Shaft With Protection Sleeve Having Stage Bowls Of Closed Grained Bronze Impeller Complete In C.I Body. The Pump Will Be Directly Coupled To Required Wet Type Induction Motor Of Speed 2900 Rpm Suitable For Operation On 3-?, 415V, 50Hz, Ac Supply, Discharge: 300 Lpm, Head: 70 Mtr, Stage - 10.Delivery Size:50 Mm.Make Of Pump: Bs / Ksb / Su / As Approved By Djb. 2 Making And Supply Of Cubical Panel For Incomer Power Supply Suitable For Wall Mounting Of Size 400 X 350 X 200 Mm ( Minimum ) Made Out Of 16 Swg Crca Sheet, Indoor Type, Duly Painted With Powder Coating, Complete With Following Switchgears And Instruments Duly Installed With Their Complete Connections And Inter Connections With Copper Cables Etc. As Per Requirement And With Cable Connectors For Making Required Power Supply Connections By Fixing The 40 Amp 4P Elcb / Rccb – 1 No., 32 Amp Mcb 4Pole-1 No. , 3 No’S Indicating Led Fittings With 6 Amp Sp Mcbs, 40 Amp Panel Mounting Change Over Switch Make Of Insertions - L&T / Bch / Schneider / Standard / Hpl 3 Lt Cubical Type Electrical Panel Board Floor / Wall Mounted Of Welded Construction Of Size 1370Mm X 760Mm X 460Mm Fabricated With 16 Swg M.S. Sheet With Horizontal And Vertical Intermediate Chamber Of Suitable Size On Suitable Size Insulating Board To Make The Panel Robust, Having Double Door With 14 Swg S.S Hinges Along With Double Locking Arrangement With Arrangement For Mounting Of Switch Gear And Electrical Energy Meter I / C Powder Coating , Vermin Proof Having Following Items 1. Mccb 63 Amp, 4 Pole-1No.2. Rccb / Elcb 63 Amp, 4 Pole With Earth Fault Indicator And Positive Contact Indication Protecting A Circuit Automatically 1No 3. Fully Automatic Star Delta Starter Of 10Hp, 3 Phase Oil Immersed Type 1No 4. Digital Ampere Meter 96Mmx96mm Square Shape Of 0-30 Amp Range 1 No 5. Digital Voltmeter Of 96Mm X 96 Mm Square Shape Of 0-500 Volt Range With Selector Switch 1No 6. Led Indicating Lamps With Fitting ( A Set Of 3Lamps ) 1Set 7. Shunt Capacitor Of 5 Kvar With Three Phaseisolator 1No 8. Motor Protection Assembly Having Earth Leakage Protection, Phase Sequence Corrector, Single Phasing Protection, Over Load Protection, High Voltage-Low Voltage Protection. 1No 9. Programmable Time Switch ( I.E. Ryb Phase & Facility To Change Over From Automatic To Manual & Vice Versa ) Up To 10 H.P.1No10. Complete Wiring Of Panel Board & Installation Of Electrical Accessories In The Panel With Required Copper Conductor Wire & Thimbling Etcas Required. The Panel Board Shall Be Mounted On The Base Frame Of 600Mm Height Made Of 50X50x6mm Angle Iron Frame.Make:-All The Insert Used In Panel Must Be Of Djb Approved Makes And Should Be Isi Marked Where Make Of That Equipment Is Not Approved 4 Supply Of Four Core Pvc Insulated And Fr Pvc Round Sheathed, Copper Conductor ( Flexible ) Industrial Cable, 1100 Volt, Conforming To Is 694 Of 10 Sq Mm. Make: Havells / Fort Gloster / Grandley / Icl / Cci / Icc / Universal 5 Supply Of Three Core Flat Cable With Bare Bunched Copper Conductor Insulated & Sheathed With Pvc For Submersible Pump Motor With Voltage Grade Upto 1100V Of 4.0 Sq Mm.Make: Havells / Fort Gloster / Grandley / Icl / Cci / Icc / Universal 6 Supply-Of G.I. Pipe 50 Mm Dia, Medium-Class, Each Of 3 Meters Long, Duly Threaded On Both-Ends, Welded & Fitted With G.I. / M.S. Flange Ofboth Ends With A Slot For Submersible-Cable. Welding Of M.S Strips At Both Ends On Flange.Make Of Pipe: Jindal / Tata. 7 Supply-Of Tail-Piece Of Medium-Class G.I.-Pipe 500 Mm Long With One-End Threaded, As Per Out-Let Of Pump And Another-End Flanged, As Per Size Of G.I. Pipe 50 Mm Dia. Make Of Pipe:Jindal / Tata. 8 Supply-Of Orifice-Assembly 50 Mm Dia, 0.6 Meter Long, Double-Flange. One Side M .S. Flange And Other Side G.I Flange.Make Of Pipe:Jindal / Tata 9 Supply Of Ci Df Non Rising Spindle Sluice Valve Pn 1.0 / Is:14846 Ci Body / Wedge / Bronze Ring / Ss / L410 Shaft Construction Of Size: - 50 Mm. Djb Sor E&M 2022 Item Code 4.7.2 Make: Kirloslar / Ivc / Djb Approved 10 Supply-Of C.I. D / F Swing-Type Non-Return Valve, As Per 1S:5312 ( Part 1 & 2 ) Pn 1.0, 1S:14846, C.I. Body Door.Bronze To Rubber Ringof Size: 50 Mm Dia.Djb Sor E&M 2022 Item Code 4.9.2 Make: Kirloskar / Ivc / Djb Approved 11 Supply-Of Rubber-Packing 50% Neoprene Sheet ( 1.5Mm To 25Mm ) As Suitablefor 50Mm Dia Flange.Djb Sor E&M Item Code 22.6.1 12 Supply-Of M.S. Clamp Of 600 Mm Length, Duly Fabricated Out-Of 12 Mm Thick, 50 Mm Wide M.S.Plate For Holding The Pipe Of 50 Mm Dia. 13 Supply-Of G.I. Bend 90° X 50 Mm Dia, Having Flange At Both-Ends One Side M .S. Flange And Other Side G.I Flange. 14 S / O 6 Mm Pvc Coated Size Steel Wire Rope For Holding The Pump.Make:Usha / Isi 15 Supply-Of Suitable Size Nut-Bolts Of Different Size I.E. 1.5” & 2.5” Long, Threaded Of Good Quality. 16 Supply-Of Bore-Cover Plate Of Size: Suitable For 300 Mm Casing Made Out From 4 Mm Thick M.S.-Sheet In 2-Halves And A Circular-Hole Of Holding 50 Mm Dia Pipe In Center With Locking Arrangement By Nuts & Bolts. 17 Installation Of All E&M Equipments, Lowering Pump Set In To The Bore All Piping Work Fixing Of Valves And Accessories Executing Minor Civil Works, Making Electrical Connections With Cable As Required Size I / C Watch And Ward Cartage, Taking All Safety Measures All Tools And Tackles, Double Long Boom Crane ( If Required ) Testing And Commissioning Of All E&M Equipments At No Load And Full Load Conditions As Per Standard From Full Satisfaction Of Engineer-In-Charge.

INR 500 /-

INR 7000.0 /-

Refer document

Name of Work: -SIC of E&M equipment at Sector A-10 Pocket 7 Narea tube wellin AC-01

Sl. No.	Item Description
1	Supply of 7.5 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3-?, 415V, 50Hz, AC supply, Discharge: 300 LPM, Head: 70 mtr, Stage - 10.Delivery size:50 mm.Make of Pump: BS/KSB/SU/As approved by DJB.
2	Making and Supply of Cubical Panel for Incomer Power supply suitable for wall mounting of size 400 X 350 X 200 mm (minimum) made out of 16 SWG CRCA sheet, Indoor type, duly painted with powder coating, complete with following switchgears and instruments duly installed with their complete connections and inter connections with copper cables etc. as per requirement and with cable connectors for making required power supply connections by fixing the 40 amp 4P ELCB/RCCB – 1 No., 32 Amp MCB 4pole-1 No. , 3 No’s indicating LED fittings with 6 amp SP MCBs, 40 amp panel mounting change over switch Make of insertions - L&T/BCH/ Schneider/standard/HPL
3	LT Cubical type electrical Panel board Floor/Wall Mounted of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating ,Vermin proof having following items 1. MCCB 63 Amp, 4 Pole-1No. 2. RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No 3. Fully automatic star delta starter of 10HP,3 Phase oil immersed type 1No 4. Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1 No 5. Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No 6. LED Indicating lamps with fitting (a set of 3 lamps) 1Set 7. Shunt capacitor of 5 KVAR with three phase isolator 1No 8. Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No 9. Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No 10. Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved
4	Supply of four core PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 of 10 sq mm. Make: Havells / Fort Gloster/ Grandley / ICL / CCI/ICC/Universal
5	Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 4.0 sq mm.Make: Havells / Fort Gloster/ Grandley / ICL / CCI/ICC/Universal
6	Supply-Of G.I. Pipe 50 mm dia, Medium-class, each of 3"" Meters Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange ofboth ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange.Make of Pipe: Jindal / TATA.
7	Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 50 mm dia. Make of Pipe:Jindal / TATA.
8	Supply-Of Orifice-Assembly 50 mm dia, 0.6 Meter Long, Double-Flange. One side M .S. Flange and other side G.I flange.Make of Pipe:Jindal / TATA
9	Supply of CI DF Non Rising spindle sluice valve PN 1.0 / IS:14846 CI body / wedge /bronze ring/SS/l410 Shaft construction of size: - 50 mm. DJB SOR E&M 2022 item Code 4.7.2 Make: Kirloslar/IVC/DJB Approved
10	Supply-Of C.I. D/F swing-type Non-Return Valve, as per 1S:5312 (Part 1 & 2) PN 1.0, 1S:14846, C.I. Body door.bronze to rubber ringof size: 50 mm dia.DJB SOR E&M 2022 item Code 4.9.2 Make: Kirloskar /IVC/DJB Approved
11	Supply-Of Rubber-packing 50% Neoprene sheet(1.5mm to 25mm) as suitablefor 50mm dia Flange.DJB SOR E&M Item Code 22.6.1
12	Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12 mm thick, 50 mm wide M.S.Plate for holding the Pipe of 50 mm dia.
13	Supply-Of G.I. Bend 90° x 50 mm dia, having Flange at both-ends One side M .S. Flange and other side G.I flange.
14	S/o 6 mm PVC coated size steel wire rope for holding the pump.Make:Usha/ISI
15	Supply-Of suitable size Nut-Bolts of different size i.e. 1.5” & 2.5” Long, threaded of good quality.
16	Supply-Of Bore-Cover Plate of Size: suitable for 300 mm Casing made out from 4 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of holding 50 mm dia pipe in center with Locking arrangement by Nuts & Bolts.
17	Installation of all E&M Equipments, lowering pump set in to the bore all piping work fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size I/C watch and ward cartage, taking all safety measures all tools and tackles, double long boom crane (if required) testing and commissioning of all E&M equipments at no load and full load conditions as per standard from full satisfaction of Engineer-in-Charge.