Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stoneaggregate 40 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundation footings, bases for coloumn |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for : Coloumn, Piers, abuttments, Pillers, Post and struts |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | Cement Plaster in fine sand 12 mm in 1:4 |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 13 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Red sand stone - exposed face fine dressed with rough backing 30 mm thick |
| 14 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size) |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stoneaggregate 20 mm nominal size) |
| 17 | Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 19 | Providing and laying Wooden log Signage with designer background of stone logs with hollow tubeStainless steel letters |
| 20 | Providing and fixing Tensile shed for sitting 4 m x 4 m with PVC membrane MS structure |
| 21 | CIVIL WORKS FOR TOILET |
| 22 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. |
| 23 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead u to 50 m and lift u to 1.5 m. |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up -to linth level : 1:3:6 (1 Cement : 3 coarse sand (zone-111): 6 graded stone aggregate 40 mm nominal size). |
| 25 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-111): 3 graded stone aggregate 20 mm nominal size). |
| 26 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) : 3 graded stone aggregate 20 mm nominal size). |
| 27 | Centering and shuttering including strutting, propping etc, and removal of form for all hei hts: Foundations, footings, bases of columns, etc. for mass concrete |
| 28 | Centering and shuttering including strutting, propping etc, and removal of form for all hei hts:Foundations, footings, bases of columns, etc. for mass concrete |
| 29 | Centering and shuttering including strutting, propping etc, and removal of form for all hei hts: Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 30 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanicallyrreated bars of grade Fe5001) or more |
| 31 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and linth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 32 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all sha es and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 33 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 34 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolliñg Shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover |
| 35 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 36 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 37 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 CementCoarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white Cement and matChing pigment etc., complete. |
| 38 | 12 mm cement laster of mix :1:6 1 cement: 6 coarse sand |
| 39 | 20 mm cement laster of mix :1:6 1 cement: 6 coarse sand |
| 40 | 6 mm cement laster of mix :1:3 1 cement : 3 fine sand |
| 41 | Finishing walls with Acrylic Smooth exterior aint of re uired shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat o exterior primer applied @ 2.20 kg/ 10 sqm) |
| 42 | Distempering with oil bound washable distemper of approved brand and manufacture to ive an even shade :New work (two or more coats) over and including water thinnable priming coat with cement rimer |
| 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth com lete. |
| 44 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers com lete. |
| 45 | Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections , of size 65 mm x 55 mm with wall thickness 2.0 mm0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer\"s specification and direction of Engineer-in-charge. |
| 46 | Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm 0.2 .mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm 0.2 mm).Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and w |
| 47 | Providing and fixing factory made upVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.l fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (i required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete. as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes andFixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. Area u to 0.75 s m. |
| 48 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic itemWith float glass panes of 4.0 mm thickness wei ht not less than 10k s m |
| 49 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm |
| 50 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessar screws etc. com lete200x10 mm |
| 51 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS • 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm |
| 52 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. com lete. |
| 53 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etc. com lete:100x75x4 mm |
| 54 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etc. com lete:75x63x4 mm |
| 55 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 56 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. |
| 57 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS • 3564, embossed on the body, door weight upto36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 58 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beadin |
| 59 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ O.Žgg kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately, |
| 60 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineerincharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 61 | Granite of an colour and shadeStone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement com lete.8mm thick |
| 62 | SANITARY WORKS FOR TOILET |
| 63 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with inte ral e foot rests |
| 64 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. rackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 65 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushin cistern |
| 66 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste o standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever re uire:White Vitreous China Wash basin size 630x450 mm with a air of 15 mm C.P. brass illarta s |
| 67 | Providin and fixin collar .100 mmSand cast ironas er IS - 1729 |
| 68 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making ood the walls and floors :100 mm inlet and 100 mm outletSand cast iron S&S as er IS: 3989 |
| 69 | Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 ms |
| 70 | Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 71 | Providing and fixing PTMT towel rail complete with brackets fixed tc wooden cleats with CP brass screws with concealed fittings arrangement of approved uali and colour.450 mm long towel rail with total length of 495 mm, 78mm wide and effective height of 88 mm, weighing not less than 170 ms |
| 72 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box I()()mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class desi nation 7.5 |
| 73 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fatting arrangements, weighing not less than 106 ms. |
| 74 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design1.50 mm diameter S.W. i e |
| 75 | Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia |
| 76 | S.C.I. till or nahani ratin 100 mm dia |
| 77 | SEWER LINE WORKS FOR TOILET |
| 78 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soilPipes, cables etc. cxcccding go mm dia. but not exceedin 300 mm dia |
| 79 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-inchar e :bituminous road |
| 80 | Providing and laying in position cement concrete of specified grade excluding the cost o centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-111) : 4 raded stone a re ate 20 mm nominal size |
| 81 | Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia |
| 82 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard desi n :150 mm diameter S.W. i e |
| 83 | Constructing brick masonry circular manhole1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to IS. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) .With Sewer bricks conformin IS : 4885 |
| 84 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 455x610 mm and 45 cm deep for sin le i e line :With common burnt clay F.P.S. (non modular) bricks of class desi ation 7.5 |
| 85 | PLUMBING WORKS FOR TOILET |
| 86 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts com lete.100 mm diaSand cast iron S&Sas er IS- 1729 |
| 87 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. (internal works).A. 15 mm dia nominal bore |
| 88 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. (internal works).B. 20mm dia nominal bore |
| 89 | Providing and fixing G.l. pipes complete with G.I. fittings including trenching and refillin etc. external work .A, 25 mm dia nominal bore |
| 90 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end25 mm nominal bore |
| 91 | Providingand fixing brass ferruleC.I. mouth cover including boring and ta in the main : 15 mm nominal bore |
| 92 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 93 | Providing and fixing C.P. brass bib cock of approved quality conforming toIS:893115 mm nominal bore |
| 94 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of a roved make conformin to IS:8931.15 mm nominal bore |
| 95 | Providing and fixing square-mouth S.W. gully trap class SP-I complete with C.I. grating brick masonry chamber with water tight C.I. cover With fiaifle Of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size PteWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 96 | ELECTRICAL WORKS TOILETS |
| 97 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Grou A |
| 98 | Wiring for circuit/ submain wiring alongwith earth wire with the fcllowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq, mm + 1 X 1.5 sq.mm earth wire |
| 99 | Wiring for circuit/ submain wiring alongwith earth wire with the fcllowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq.mm earth wire |
| 100 | Wiring for circuit/ submain wiring alongwith earth wire with the fcllowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mrn + 1 X 4 sq. mm earth wire |
| 101 | Supplying and fixing of following sizes of medium class PVC ccnduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 102 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required,200 mm X 250 mm X 60 mm dee |
| 103 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc.as re uired.5 6 A switch |
| 104 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc.as re uired.6 in 15 16 A socket outlet |
| 105 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plateswitch box including connections but excluding modular plate etc. as re uired. |
| 106 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6A modular socket outlet and 5/6 A modular switch, connections etc. as required. (For Sept. light plugs). |
| 107 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.(for power point) |
| 108 | Supply and fixing 3 pin, 5 amp. ceilling rose on the existing junction box/ wooden block includingconnection etc. as re uired |
| 109 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 110 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as re uired.U to 450 mm swee |
| 111 | Extra for fixing the louvers/ shutters complete with frame fora exhaust fan of all sizes. |
| 112 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator)12 wa , Double door |
| 113 | Supplying and fixing 5 A to 32A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required,Sin le ole |
| 114 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as re uired.63 A |
| 115 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A |
| 116 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 117 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I.thimble excavation and refillin as re uired. |
| 118 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid o1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing |
| 119 | Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBS for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.2 output per phase and suitable for single phase |
| 120 | Supplying & laying of 2x10 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring &LSZH outer sheath complete as required. |
| 121 | S/F of Ix 28 Watt T-5 type EBT light fitting approved at PWD Uttarakhand |
| 122 | S/F of mirrior Light with CFL 11 watt Bajaj/Eqv. Make |
| 123 | Supply of 12\" heavy dutyExhaust fan, |
| 124 | S/F of 1 HP electric water pump of standard make(sharp,cromption) including supply of all materials,labour and T & P etc. required for the completion of the workCrom ton |
| 125 | Supply and fixingof ceiling fanOrient Khetan |
| 126 | Supply and fixing of automatic sensor quick hand dryer including all material,labour,T and P etc. required for the completion of the work-Jaquar |
| 127 | Supply and fixing of vending machine including all material,labour,T and P etc. required for the completionof the work |
| 128 | Supply and fixing of incinerator machine including all material,labour,T and P etc. required for the completion of the work |
| 129 | ELECTRICAL WORKS |
| 130 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 2.5 sq. mm |
| 131 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm pvc |
| 132 | Supply installation testing Commissioning Connection box Main incommer protection four pole MCB, with separate single pole MCB\"s as pr decided loads, 4 pole contactor,s and timer as required Junction box /Feeder pillar made of MS material comprises of MCB\"s, Connection terminals, enclosures for timer, timer, contactors, grouting in Ground.etc |
| 133 | Supply and laying of aluminium Ar cable of size 4corex16sqmm UG 1100V ISI make which included excavation of mud laying of cable 0.75m below ground level and refilling of trenches as required |
| 134 | Supply & installation of decorative bollard light as per attached drawing. The totalheight of the decorative bollard light shall be 750 mm nominal. The Decorative bollardlight stand shall be made out of Mild steel tube Ø114 mm. The decorative bollard topshall be made out of cast aluminium and bottom base plate shall be in cast iron. Thebollard light shall be in Retrofit LED. Translucent Polycarbonate Diffusers shall be fitted in the bollard light .The Impact resistance of Decorative bollard light shall beMinimum IK08 .The shape and sizes of the bollard light shall be as per attacheddrawing. The decorative bollard light shall be machined and polished properly to giveit a smooth surface. The decorative bollard light shall be duly pretreated by sandingprocess and shall be painted/ Powder coated in Polyurethane/Polyester Coating as per Colour shade required by engineer in charge. The coating on the bollard light shall be \baked in the oven at required temperature. The coating on the bollard light shall pass a minimum of 300 salt spray hours |
| 135 | Mislaneous and other repairing work at site |
| 136 | HORTICULTURE WORKS |
| 137 | Cleaning of Jungle including uprooting of rank vegetation , grass , brush wood trees and sapling of gorth upto 30 cm measured at height of 01 m above ground level and removal of rubbish upto a distance of 50 m out side the periphery of area cleared |
| 138 | Uprooting Rank vegetation and weeds by digging the area to the depth 60 cm, removing all weeds and other growth with roots by forking repetedly breaking clods, rough dressing, flooding with water , uprooting fresh growth after 10 to 15 days and then fine dressing for planting new grass , including disposal of all rubbish with all leads and lifts |
| 139 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, by the officer in-charge |
| 140 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 141 | Providing & Mixing Vermi compost of Good quality as per direction of officer incharge at 3 kg / Sqmin Grassing area and 5 kg / Sqm in Beds |
| 142 | Supplying and spreading of Jamuna sand/ River sand in Lawn area, including watering, mixing and dressing complete |
| 143 | Supply and stacking of Good earth at site including Royalty and carriage upto 5 Km lead complete ( Earth measured in stacks will be reduced by 20% for Payment ) |
| 144 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge |
| 145 | Providing and Displaying Cycus revolutaspecimen plant, having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumfrance of base stem well developed in 40 cm challi, as per direction of the officer-in- charge. |
| 146 | Providing and Displaying of Ophiopogon jaburan( variegated ) plant,full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per directionof the officer-in-charge. |
| 147 | Providing & fixing of White River (Stone) Pables size of 2\" to 2.50\" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. |
| 148 | Providing and Displaying Topiary of Casuarina plant fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 149 | Providing and Displaying of Iresine herbstii plant, of height 20-30 cm. full of branches well developed in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 150 | Providing and Displaying Furcaria Variegated plant hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-in- charge. |
| 151 | Providing and Displaying Golden Bottle brush / Copper bottle BrushTopiary plant welldeveloped with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cmCement Pot as per direction of the officer-in- charge. |
| 152 | Ruellia well developedfull of fresh and healthy folliage 30 cm to 45 cm ht in 15 cm poly bag as per direction of officer incharge |
| 153 | Providing and Displaying Ficus black vivion pillertopiary plant (sylinder type) well developed with fresh & healthy 180 to 210 cm ht in 40 cm Cement Pot as per direction of the officer-in- charge. |
| 154 | Day lillieswell developedfull of fresh and healthy folliage 20 cm to 30 cm ht in 15 cm poly bag as per direction of officer incharge |
| 155 | Providing and displaying of Raphis palm plant, having ht. 45 cm to 60 cm with 5 to 7 suckers, well developed, full of fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as |
| 156 | Providing and Displaying of of Chlorophytum-variegated plant, full of leafy suckers in 15 cm size of Earthen Pot / Plastic Pot & as per direction ofthe officer-in-charge. |
| 157 | Providing and Displaying of Tradiscantia plant, full of leaves in Earthen Pot/ Plastic Pot of size20 cm. as per direction of the officer-in-charge. |
| 158 | Providing and displaying of Dracaena mahatmaplant, having ht. 30 cm to 45 cm, well developed, fresh and healthy foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 159 | Providing and Displaying Phoenix roebeleniipalm plant well developed having 20 to 25 fresh& healthy leaves 90 to 105 cm ht. in 30 cm Cement Pot as per direction of the officer-in- charge. |
| 160 | Providing and displaying of Schefflera high colour plant, having ht. 23 cm to 30 cm, well developed with fresh & healthy foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 161 | Providing and Displaying Cycus cirsnallis plant well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 162 | Cleviawell developedfull of fresh and healthy folliage 20 cm to 30 cm ht in 10 cm Earthern pot as per direction of officer incharge |
| 163 | Pittosporum Tobira Varigatedwell developed full of fresh and healthy folliage having a big crown 75 cm to 90 cm ht in 45 cm poly bag as per direction of officer incharge |
| 164 | Loropetrum Redwell developedfull of fresh and healthy folliage 20 cm to 30 cm ht in 15 cm poly bag as per direction of officer incharge |
| 165 | Leucophyllum Fruitesencewell developedfullof fresh and healthy folliage 30 cm to 45 cm ht in 15 cm poly bag as per direction of officer incharge |
| 166 | Gardenia Dwarfwell developedfull of fresh and healthy folliage 15 cm to 20 cm ht in 15 cm poly bag as per direction of officer incharge |
| 167 | Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. |
| 168 | Providing and displaying of cephortia Palm plant, having ht. 1.20 m. to 1.50 m. with 8-10 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction ofthe officer-in-charge. |
| 169 | Providing and Displaying Cyprus Golden plant Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge. |
| 170 | Pentas lanceolatawell developedfull of fresh and healthy folliage 15 cm to 20 cm ht in 15 cm poly bag as per direction of officer incharge |
| 171 | Amaryllis Belladonnawell developedfull of fresh and healthy folliage 20 cm to 30 cm ht in15 cm poly bag as per direction of officer incharge |
| 172 | Providing and displaying of Areca Palm plant, having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots & as per direction of theofficer-in-charge. |
| 173 | Providing and Displaying Bird of paradise plant well developed with fresh & healthy 90 to 120 cm ht in 30 cm Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. |
| 174 | Providing and Displaying Ficus Nuda topiary plant well developed with fresh & healthy 5 to 6 big ball specific size and shape 180to 210cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 175 | Providing and Displaying of of Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in- charge. |
| 176 | Providing and Displaying Bismarkia Palm plant115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in- charge |
| 177 | Providing and Displaying of Ophiopogon plant,Green/Black full of leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge. |
| 178 | Juniprus Chinensiswell developedfull of fresh and healthy folliage 120 cm to 135 cm ht in 40 cm poly bag as per direction of officer incharge |
| 179 | Canna varigated Dwarfwell developedfull of fresh and healthy folliage 20 cm to 30 cm ht in15 cm poly bag as per direction of officer incharge |
| 180 | Pennisetum Grasswell developedfull of fresh and healthy folliage 30 cm to 45 cm ht in 15 cm poly bag as per direction of officer incharge |
| 181 | Pencil pinewell developedfull of fresh and healthy folliage 180 cm to 210 cm ht in 45cm poly bag as per direction of officer incharge |
| 182 | Plumaria alba dwarf ( Obtusa)well developedfull of fresh and healthy folliage 60 cm to 75 cm ht in 40 cm poly bag as per direction of officer incharge |
| 183 | Providing and Displaying of Dianella variegated plant, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 184 | Providing and Displaying of Buxus plant having ht. 25 cm to 32 cm multi branched in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 185 | Supply and stacking of plant Plumbego capensis well developed with fresh and healthy 30 to 45 cm ht., with bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge |
| 186 | Supply and stacking of plant Tabernaemontana coronaria (Chandni single) of height 45-60 cm. in earthen pots of size 20 cm as per direction ofthe officer-in-charge. |
| 187 | Supply and stacking of plant Tabernaemontana coronaria (chandni variegated) of height 45-60 cm. with3-4 branches earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 188 | Supply and stacking of plant Tecoma stans of height 45-60 cm. branched in earthen pots of size 20 cm as per direction of the officer-in- charge. |
| 189 | Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department and other T & P material/articles shall be provided by the contractor) and as per direction of officer in charge.700 no. x 12 Months = 8400.00 |
| 190 | Complete maintenance of shrubs (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application offertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. 2500 no. x 12 Months = 30000 |
| 191 | Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. 326.87 Sqm x 12 Months = 3922.44 Sqm |
| 192 | Maintenance of Lawns or Turfing Slopes including watering etc @ 271.40 /- per year/ Sqm , Rates per Month 22.61 /- 3500 Sqm x 12 Months = 30000 Sqm |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
