| 2 | OD167707/2023-2024:Supply, installation Testing and commissioning of 13Passenger (Gearless ,machine roomless), Lift with the following specification : 1) Type of Lift – passenger (13Passenger),2) Load / Persons -884Kg. / 13 persons, )Rated speed -1.00 M/Sec.4)Travel - 3 Mtr ( Approx ), 5)No. of floor and entrance served- Ground +1 Floor, 6)No. of floor served - 2 floors (2 stop and 2 openings, all opening on the same side.) 7)Method of control - With/without attendant with Microprocessor controller., 8)Position of machine room - MRL 9)Size of lift well – 1950mm x 3000mm, 10)Size of car platform - As per IS, 11)Drive - Variable voltage variable frequency (V3F), 12)Operation – Simplex full selective collective control with load weighing device, 13)Construction of design and furnishing of car body work - Scratch proof/ moon rock Stainless steel finish cabinet, scratch proof/ moon rock stainless steel door, stainless steel mirror finish ceiling, Stainless steel 6mm anti skid flooring, fan with timer cut off , push to talk, LED dot matrix display, LED lighting, Brailey symbol button in cabin and all landing, and floor announcement system.14)Car entrance – Automatic side/Centre opening scratch proof stainless steel sliding door as per IS with provision for mechanical opening key for emergency with full length infra red light curtains and stainless steel framed ½ glass door,15) Call indication and position indicators - Up/down direction and position Dot Matrix LED indication shall be provided at all landings , 16)Electric supply - Light 230/50C/s single phase 2 wire system. Power 415V 50C/s 3 phase 4 wire system.,17)Regulation-350/450 V (SMPS Based), 18 Automatic Rescue Device - Provide automatic rescue device with an electronic controller powered by suitable size dry type maintenance free batteries. The rescue operation within 20 seconds if power failure, 19)Indication, Digital push button and other requirements in the car - a) Car position (Inside the car at all landings) ,b) Call indicator, c) Push button for Door close/open (inside the car). d) Emergency stop button, e) Flush mounted switch for fan and light, f) Non stop button g) Emergency lamp with UPS/Inverter Back Up., h) Alarm bell with UPS/Inverter Back up I) Push and Talk, J) Fireman switch at main lobby, k) Auto attendant control,21) Winding handle - Manual winding handle provision for car for use in emergencies,22) Safeties - a) Over speed governor, operated safety gear, b) Buffers, c) Motor over load protection, d) Phase reversal protection, e)Single phase preventer, f) Final limit switch, g)Door pressure Limit switch, Other safeties as per ISS.23) Levelling - Automatic levelling at all landings as per IS,24)Control panel –control panel shall be accommodated in dust proof sheet metal enclosure. 25)Tests.- At site test as per IS-14665/2000 to be carried out before handing over.26) Scope of work, 1. Supply of LIFT materials & Installation. 2) Minor civil works such as construction of buffer block in the pit, machine foundation in the machine , foundation necessary for mounting the control panel, core cutting, cutting pockets and grouting brackets for guide rails, cutting pockets and grouting boxes for control units in the front side. This does not include correction of wall opening on the front side of the wall. 3) Scaffolding. 4) Free servicing for 36 months after commissioning. 5) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. 6) Supply of booklet with complete details of maintenance schedule and control diagram. 7). Giving training to department Staff for attending trouble shooting. 8) obtaining Scheme approval as well as energization certificate from the electrical inspectorate including preparation of necessary drawing for the same. Necessary fee shall be remitted to the inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per lift rule. 9) door frames.27) Guarantee- Company shall carry out free maintenance during 36 months of warranty period which shall also include, 1) Cleaning Lift Equipment, 2) Lubricating all required machineries/Equipment's, 3) Replacing of Lubricating oil when required, 4) replacing fusible items, alarm etc. 5)Recharging/ replacing batteries in case of such requirements. 6) replacing/Rewiring motor if required. 7) Replacing/renewing all defective part of the lift including V3F Drive unit if necessary |
