Military Engineer Services-MES has published Tender For Repair Replacement Of Fencing Gates Security Wall Path And Hard Standing At 2003 Stn And Repair Replacement Of Sewage Line Manhole Cleaning Strom Water Drainage Cleaning Of Septic Tank And Soakage Well Hard Standing And Drain Repair Etc At. Submission Date for this Tender is 06-12-2023. Drainage Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-12-2023 |
| Sl. No. | Item Description |
| 1 | M&L for Removing Complaint of Blockage (viz Blockage in Bath, Kitchen, WC & Drainage in Traps/Line from Trap to 1st Manhole, Blockage in Sewage Line from 1st Manhole to Septic Tank, Cleaning of Manhole) by deploying Trades Men as per Stipulated Time Frame from 9.00 AM to 5.00 PM and maintaining proper Records of COMPLETED and PENDING Complaints including updating status of Complaints through SMS/Manually forAFSSR, complete all as specified and as directed. |
| 2 | M&L for Clearning Choked Sewer Lines of 100mm to 250mm dia of any depth, Manually or thorough Mechanical Appliances and Making Sewer Line Functional complete including Working Under Foul Condition and depositing the sludge, rubbish, etc. off the Premises outside the MOD/AF Land or Sewage Treatment Plant, complete all as specified and as directed. |
| 3 | M&L for Removing Manhole Cover and Desludging/Desilting/Cleaning of existing Manholes of depth upto 1.50 Metre filled with Sludge by means of Manually or through Mechanical Appliances complete, Working Under Foul Condition and resetting the Manholes Cover in same Position and depositing and removal of Sludge, Rubbish, etc. off the Premises Outside Defence Land, complete all as specified and as directed. |
| 4 | M&L for Removing Manhole Cover and Desludging/Desilting/Cleaning of existing Manholes of depth exc 1.50 mtr but not exc 4.5Mtr filled with Sludge by means of Manually or through Mechanical Appliances complete, Working Under Foul Condition and resetting the Manholes Cover in same Position and depositing and removal of Sludge, Rubbish, etc. off the Premises Outside Defence Land, complete all as specified and as directed. |
| 5 | M&L for Dewatering Sludge from Soakage Wells by Pumping out as required to keep the Complete Sewage System in order and as to avoid any Over flowing of Sewage Water including removing of Soak Well water pumped out as such out side of Defence Land by means of Pumps and Tankers (Capacity of Water Tanker shall be 5000 Litres) as required including Operating and Supervisory Staff(s) so as to keep the whole Station area Pollution Free, complete all as specified and as directed. NOTE : i). Each Trip of Tanker to be taken Out side of MOD/AF Land in presence of JE in-Charge.This includes deployment of necessary T&P and nothing shall be Paid Extra.ii) Disilting/Cleaning of Soakagew well shall be done as & when decided by Engineer-In-ChargeNOTE FOR ITEM No. 1,2,3,4 & 5 (a)If the Complaint is not attended within a Day the Recovery shall be levied on the Contractor for non-complelion of the Complaint at the rate of recovery included in Tender document here-in-after. (b)It is mandatory on the Part of Contractor to deploy minimum 2 No. of Safaiwala/Mazdoor with requisite T&P throughout the Entire Contract Period. |
| 6 | However required manpower and T & P, if required more to meet the requirement as mentioned inItem No. 2is also to be arranged by the Contractor at his own Arrangements and Cost. Quoted Rates shall be deemed to include this factor and nothing Extra shall be admissible on this account other than Quoted Rates for Item No. 2, 3 & 4. In case of any dispute on this factor, the decision of Accepting Officer shall be final, conclusive and binding.NOTE : Contractro shall maintain a register of complaints duly obtained signature from the user and submit to the JE concerned/ Engineer-In-Charge for claiming payment against schedule A item no 01 to 05 is mandatory. PENALTY/RECOVERY ON THE CONTRACTOR FOR DEFAULT PENALTY/RECOVER RATE 1. Penalty/Recovery for non removal of complaint beyond 12 hours upto24 HoursRs. 100 per complaint Per day. 2. Penalty/Recovery for non removal of complaint beyond beyond 24 hours Rs. 100 per complaintper day 3. Penalty/Recovery for absent from duty for one safaiwala/mazdoorRs. 1000/- per day 4. Penalty/Recovery for giving false completion of removal of blockage Rs. 500 per complaint. |
| 7 | M&L for Desilting/Cleaning of Septic Tank and the like including Sludge Water and Solids Mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank and disposal of the same to Outside of MD/AF Land, complete all as specified and as directed. NOTE : Disilting/Cleaning of Septic Tanks shall be done as & when decided by Engr-in-charge. |
| 8 | Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed. |
| 9 | Taking down Cement Plaster including Raking out Joints, Hacking for Key, Scrubbing down with Water and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed. |
| 10 | Demolition & breaking up Drain Pipe 150mm dia (Salt Glazed Ware, AC or Reinforced Concrete) set in Cement Mortar, complete all as specified and as directed. |
| 11 | Demolition & breaking up Drain Pipe 200mm dia (Salt Glazed Ware, AC or Reinforced Concrete) set in Cement Mortar, complete all as specified and as directed. |
| 12 | Dismantling plain or corrugated steel/fibre sheeting of any gauge or thickness including nanital or similar pattern roof covering complete all as specified and as directed. |
| 13 | M&L for Reinforced Concrete Pipes 150mm (internal dia), Class NP-2, laid in Trenches on Concrete Bed, to required Slope, jointed complete with Collers and tested, complete all as specified and as directed. |
| 14 | M&L for Reinforced Concrete Pipes 200mm (internal dia), Class NP-2, laid in Trenches on Concrete Bed, to required Slope, jointed complete with Collers and tested, complete all as specified and as directed. |
| 15 | M&L Extra for Forming Fair finished Drain or Channel Inner Girth in Cement Concrete, using Extra Cement including Forms, Moulds, Stopped Ends, etc., complete all as specified and as directed. |
| 16 | Excavation in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out in Soft/Loose Soil, complete all as specified and as directed. |
| 17 | Excavation in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out in Hard/Dense Soil, complete all as specified and as directed. |
| 18 | Returning, filling in approved Soft/Loose Soil including spreading leveling, watering and well ramming in layers not exc. 25 Cm thick, complete all as specified and as directed. |
| 19 | Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point including spreading over ground, complete all as specified and as directed. |
| 20 | M&L for Cement Concrete 1:3:6 (40mm graded stone aggregate) as in Concrete Bed to Drain Pipes of 150mm bore (dia), including packing under, and haunching against the sides of pipes after they are laid and testedcomplete all as specified and as directed. |
| 21 | M&L for Cement Concrete 1:3:6 (40mm graded stone aggregate) as in Concrete Bed to Drain Pipes of 200mm bore (dia), including packing under, and haunching against the sides of pipes after they are laid and testedcomplete all as specified and as directed. |
| 22 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed. |
| 23 | M&L for Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqmin Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. |
| 24 | M&L for Coloured/Printed joint free Glazed Ceramic Tiles 450x350x7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. |
| 25 | Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed. |
| 26 | M&L for Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Levelling Course for laying Floor Tiles, finishing Concrete Surfaces Fair and Even, complete all as specified and as directed. |
| 27 | M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate)in foundations, filling and mass concrete complete all as specified and as directed. |
| 28 | M&L for Cement Concrete 1:4:8, type D-2 (40mm graded stone aggregate) 75mm thick as in Fillings, Sub-base to Floors, etc. complete all as specified and as directed. |
| 29 | M&L for Cement Concrete 1:2:4 type B1 using (20mm graded crushed stone aggregate) as in coping including necessary use and waste Formwork,weathering, slightly rounded or chamfered angles and throating etc complete all asspecified and as directed. |
| 30 | M&L for Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed. |
| 31 | M&L for Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4,as in half brick wall pointed flush in cement mortaron one side complete all as specified and as directed. |
| 32 | M&L for Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, except bricks complete all as specified and as directed. |
| 33 | Demolition Cement Concrete (reinforced) of any description (above or below Ground Level) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed. |
| 34 | M&L for Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs, Manhole Cover Slabs, etc., set in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid separately under relevant Item. |
| 35 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs supported on Walls, etc., finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : Formwork & Reinforcement will be Measured and Paid separately under relevant Items. |
| 36 | M&L for Use and Waste of Formwork to Soffits of Suspended Slab and similar work not exc. 200mm thick, Fair Finished surfaces, complete all as specified and as directed. |
| 37 | M&L for Use and Waste of Formwork in Curve to edges of Concrete, Sides of RCC/PCC Bands in Walls, horizontal or sloping, and similar work, complete all as specified and as directed. |
| 38 | M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed. |
| 39 | M&L for TMT Bars 6.0mm to 8.0mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed. |
| 40 | M&L for framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk way railing frame work of water tanks and similar work confiming to Fe.290, Gde E-165 etc complete all as specified and as directed |
| 41 | M&L for Factory Made Machine Pressed Pre-cast Concrete Coloured 60mm thick of M-35 Grade,Interlocking Paver Blocks with Spikes Marks on Top Surface, of any Shape and Size, conforming to IS:15658-2006 with Grey Cement and Pigment complete all as specified and as directed |
| 42 | M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and as directed. |
| 43 | M&L for exterior grade coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. over 20mm thick screed bed inCM 1:6 complete all as specified and directed. |
| 44 | M&L Rendering 15mm thick in Cement Mortar 1:4 (Externally) on Fair Faces of Brick Walls or on Concrete Surfaces, mixing with WPC as per manufacturer"s instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : WPC will be Measured and Paid separately as ‘Supply only’ under relevant Item. |
| 45 | Supply only Integral Water Proofing compound, conforming to IS and as approved, complete all as specified. |
| 46 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed. |
| 47 | M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed. |
| 48 | M&L for preparing newly Plastered surfaces of Walls by applying Wall Putty 1 to 1.5 mm thick , cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed. |
| 49 | M&L for preparing new or previously untreated Plastered/ Concrete Surfaces as in kerb stoneof any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 50 | Taking up or down Steel Tubing 15mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and as directed. |
| 51 | Taking up or down Steel Tubing 20mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and as directed. |
| 52 | S&F 15mm bore Steel water tubing "medium grade", galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed. |
| 53 | S&F 20mm bore Steel water tubing "medium grade", galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed. |
| 54 | S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. |
| 55 | M&L Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to Outgoing Pipe and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. |
| 56 | S&F White Plastic Seat and Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed. |
| 57 | M&L for PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed. |
| 58 | S&F PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and Fixed-in-repairs, complete all as specified and as directed. |
| 59 | S&F Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 60 | S&F in repair Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for Wash Down Water Closet Pan (Pedestal Pattern) , complete all as specified and as directed. |
| 61 | S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors,and fixed-in-repairs complete all as specified and as directed. |
| 62 | S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe,RWP single socketed, in any length with PVC Joints, with or without Ears, laid in Floors and fixed-in-repairs complete all as specified and as directed. |
| 63 | S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, RWP single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls, andfixed-in-repairs Complete all as specified and as directed. |
| 64 | S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe,RWP single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls and fixed-in-repairs complete all as specified and as directed. |
| 65 | S&F PVC (SWR) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings for PVC (SWR) Pipe 75mm bore (dia), jointing with Solvent Cement and fixed, complete all as specified and as directed. |
| 66 | S&F PVC (SWR) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings for PVC (SWR) Pipe 110mm bore (dia), jointing with Solvent Cement and fixed, complete all as specified and as directed. |
| 67 | M&L for Stack Clamp for Pipe 75mm/110mm/150mm bore (dia), made out of Flat Iron 50x5mm and 16mm dia Round Iron Stay including Bolts and Nuts and securing Ends of Stays to Wall or Roof and Fixed-in-repairs, complete all as specified and as directed. |
| 68 | S&F PVC Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) and fixed-in-repairs, complete all as specified and as directed. |
| 69 | S&F PVC (SWR) 110mm bore (dia), Branch Piece, Single (Single T) Equal or Unequal with Access Door, etc., jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed. |
| 70 | M&L for Cutting into existing Manholes for Connecting New Drain Pipes of 150mm (Internal dia), Making Good to Pipe and rendering, cutting out existing Benching for and forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed. |
| 71 | M&L for2mm thick fibre glass reinforced transulcent corugated sheeting with two corrugations side lap fixed fixed with coach screw and washer in roof wall complete all as specified and as directed. |
| 72 | M&L for Preparing of old steel surfaces over 10cm in width or girth and painting one coats of synthetic enamel paint complete all as specified and as directed. |
| 73 | M&L for PCC 1:3:6 type B1 using 20mm graded stone aggregate asin floor 40 mm thick finishing the surface without using extra cement complete all as specified and as directed. |
| 74 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed. |
| 75 | Dismantling wrought iron or mild steel work of any description etc complete all as specified and as directed. |
| 76 | Dismantling fencing wire mesh, any type etc complete all as specified and as directed. |
| 77 | Dismantling post or struts (wood, steel or RCC) any section incl. taking out embedded portion and making good disturbed ground posts embedded in natural ground complete all as directed. |
| 78 | Earth work excavation in post holes ( or similar holes) in hard/dense soil ,each not exceeding 0.50 Cum ,getting out ,returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm ,watering and removing surplus soil complete all as specified and as directed. |
| 79 | S&F Framed mild steel work as in posts/ struts in fencingincluding cutting tops to shape, drilling holes,bolting,rivetting flatetc. complete conforming to Fe-290 gde E165 complete all as specified and as directed. |
| 80 | S&F framed brackets of angles cut to shape ,drilled, including bending and welding angles conforming to Fe 410-0 complete all as specified and as directed. |
| 81 | S&F Framed mild steel work as in gates including pintel hinges, stops, hand made sliding bolts etc. complete conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 82 | S&F 10 mm dia Machine made screw bolts with hexagonal or square head at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut exc 5and notexc 10 cm long complete all as specified and as directed. |
| 83 | S & F 10mm dia MS bars as in strainers forchain link fencing including necessasary welding and fixing to angle iron complete all as specified and as directed. |
| 84 | Fixing only chain link fencingincludingline wires, any mesh, size and any type of standards, rails, straining bolts etc. complete all as specified and as directed. |
| 85 | S & F in repair galvanised 2 strand steel barbed wire 2 mm dia barbed with 2.3 mm dia barbs at 75 to 80 mm spacing and straining, fixed to fencing post tieing at crossing with and including galvanised mild steel wire complete all as directed. |
| 86 | Supply only Chain link MS galvanised fencing , any size or type complete all as specified and as directed. |
| 87 | M&L for Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 88 | M&Lfor PCC 1:3:6 type C1using 20mm graded stone aggregate, 75 mm thick as in plinth protection finished even and fair complete all as specified and as directed. |
| 89 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 – 2006 of 60 mm thickness, M-35 Grade, with grey cement and pigment,over new sub-base complete all as specified. |
| 90 | M&L for 25 mm thick precast chequeredtiles of size 300 x 300 mm, coloured, pre-polished, set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles, as in floor, laid over and including 20mm thick screed bed in cement mortar 1:4, all as specified and as directed. |
| 91 | M&L for 1.00 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed. |
| 92 | S&FSteel rolling shutters 1.25 mm laths, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete with all necessary fittings all as specified and as directed |
| 93 | M&L for Repairs/Maintenance of Steel Gate/ Collapsible Gate, Oiling/ Greasing of all Moving Parts of the Gate and making Serviceable for Free Movement of Gate including replacement/adjustment, welding, drilling, etc. of all Minor Parts (viz Nuts, Bolts, Rods, Flat Iron, Angle Iron, Guide Rail, Ball Bearing, etc. of Steel Gate including Taking down and Re-fixing Steel Gate wherever necessary, complete all as specified and as directed. |
| 94 | M&L for Taking down existing Steel Rolling Shutter including Hood Cover, Pull and Push type, area not exc. 8.0 Sqm Each, Sides of clear Opening and Cleaning the Side of Shutter Suspension Shafts, Anti-guide Channels and Greasing all the Moving Parts of the Rolling Shutter and straightening Rolling Shafts and replacement of Bolts, Nut, etc. as required for Smooth Functioning of Shutter and Re-fixing the same including Hood Cover, complete all as specified and as directed. |
| 95 | Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified and as directed. |
| 96 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 97 | S&FRoof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. .Fe-410- W(Gde E-250)quality-B complete all as specified and as directed. |
| 98 | S & F in repair hot dipped galvanised concertina razer tape coil 1020 mm dia, spring steel high tensile centre core wire 2.5 mm dia having 200-250gm zinc coating, 0.5 mm thick razer sheethaving 90-120gm, zinc coating & min 10 mm width ( before wraping centre core wire),with GI clip 1.6 mm thick complete all as specified and as directed. |
| 99 | M&L for preparing old plastered surafce of wall for finishing with acrylic smooth exterior paint of required shade upto two storey of two or more coat applied @1.67ltr / 10 sqm over a coat of primer all as specified and as directed |
| 100 | M&L for Preparing Old Treated/Painted Steel and Iron Surfaces of any description, and applying Two Coat of Synthetic Enamel Paint (First quality) for Y shape Mild steel Angle Frame( area exc 0.25 Sqm but not exc 0.50 Sqm Each) fixed on boundary walls (Straining /Supported to barbed Wire and Concertina Coil) complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
