Tender For Supply Of Machinery For Setting Up Of Eri Silk Spinning Mill At Integrated Textile Park, Kharuajan, Mushalpur, Baksa, Bodoland Territorial Region ( Btr ) , Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Nov 2023
0 days left
EMD
11 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baksa → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Supply Of Machinery For Setting Up Of Eri Silk Spinning Mill At Integrated Textile Park, Kharuajan, Mushalpur, Baksa, Bodoland Territorial Region ( Btr ) , Assam
BOQ
| Sl. No. | Item Description |
| 1 | Package : Spun silk Spinning machinery |
| 2 | Boiler for deguming: 500 Kg capacity; Mild Steel; Work Pressure: 10.54 kh/cm; Automatic; 3 Phase; 415 V±6%; Non-IBR with panel and accessories, including commisioning meeting all statutory requirements |
| 3 | Washing, Degumming & bleaching vesel (Horizontal Cylindrical Roller Type Degumming Machine); illustrative specification: Dia,: 60\", Length: 80\"; outer body fabricated from 8 mm thick MS Plates supported by MS structure with sliding type S.S. openable door for material loading/unloading; S.S. perforated cylinder fabricated out of 14 gauge, 304 quality S.S. material; M.S. shaft rotating on ball bearings; S.S. support for the tank, two draining and feeding arrangement, provision for overflow prevention etc. powered by 1 HP AC Motor with suitable gearbox and control Panel. The equipment shall be painted with good quality paint both outside & inside. |
| 4 | Heavy duty Hydro extractor: 600 mm dia., Height of basket shell: 325 mm\" Approx., Capacity.: 100 kg; Basket made of Stainless Steel 304 Grade (outer body as well as inner basket made of S.S.); top discharge; bottom driven with standard Electric Motor: 2 HP, 3 phase 415 V equipped with Safety Limits Switches for top lid. The machine will be providing with A.C. Inverter drive with its Auto control panel complete. Basket speed1000 rpm Approx. |
| 5 | Drying oven:Cabinet, Double Walled Door, Centrifugal fan, Direct Driven - 2 No, Fitted with 3 phase AC induction motor -1 Hp/1440 Rpm, Dehumidifier - 1 No Fitted with single phase AC induction motor - 1/2Hp, 1440 Rpm, Manual air damper - 1 No, Heat Exchanger –1 Set, Electric Heating - 18 KW, Temperature Sensor – 1 No, Carrier Trolley - 1 No, Trolley made ofS S 304 Square Pipe, Suitable for 150 kgs Hank/Fibre, Power Control Panel with drying programmer. |
| 6 | Pupa Rider: Screw feeding System; Capacity 200 Kg per 8 Hour |
| 7 | Cocoon Opener: Drums size - 30\" dia x 30\" width; Drum RPM: 150 fitted with 3 HP Motor |
| 8 | Fibre Cutter: Circular blade type cutting machine with feed lattice and feed roller, provision for speed variation of lattice and feed roller changes; machine width: minimum 30\" |
| 9 | Pre-Opener: Willow machine; Cylinder dia: 51\" with 2 Nos. of Spike Steel undercasing, number of Spikes: Minimum 72; Feeding Lattice size: Minimum 56\" x 105\"; Delivery lattice size: Minimum 18\" x 206\"; Machine speed 360 RPM, Cleaning Blower speed 1000 RPM; Waste ejection through Screw Conveyor |
| 10 | Blow Room Line: Beater: MBO LB3/2+Flexclean LB5/6+ Feed Ventilators LAS/6+ Exhaust fan LA5/7+CP; MBO: 4.5 Mtr lattice with Needle beater, grid bar and Filter box; Flexiclean with Needle beater, Filter box |
| 11 | Waste collection unit |
| 12 | Fine Feed LA 7/6; capacity 400 - 900 gm per metre; high pressure feeding with spring loaded controlled wire mounted feed, delivery to card feed roller by Duel Delivery Rollers |
| 13 | Carding machine: Model LC361, Licker in: Single; Type of feeding: Chute feed; Linear coiler: 24 x 48 can; manual waste collection; Web doffing: Flow metal with Auto Leveller |
| 14 | Draw Frame: 4 over 3 drafting arrangements with Pressure bar Servo drive for Drafting Automatic setting for best Levelling Action Point (LAP), self-cleaning Top Rollers, Power saving and kinetic backup technology, Duo-digital auto levelling system, Separate Motor for Coiler, Inverter controlled main drive, Spectrogram for self-identification of mechanical faults. |
| 15 | Speed Frame: 40 Spindles; Drafting drive: Single side;Flyer: 16x6; Bore dia: 8; with mechanism for Bobbin tilting, Automatic roving tension control; Cleaning device: Stripper; Drafting: Spring loaded; Cradle length: 60 mm. |
| 16 | Ring Spinning - Spindles: 240; Lift: 180 mm; DUI: 18 mm; Wharve: 18.5 mm; Tube length: 200 mm; Spindle type: HLLD; Taper: 1.4; Ring Dia: 40/42 mm; Flange: 1 mm; Pneumatic Drafting; Roll dia (bottom roll/Top roll): 30-27-30 /32-27-32; Cage: 59 mm |
| 17 | Machinefor Spun yarns such as Ring spun, OE Count Range from 1 NE to 120 NE Double Side Construction ; No. of Spindles: (12 x 12) 24, Traverse: 6\" (150 mm), Traversing System:Aluminium Hard; Brushless motor with DC Drive and individual Converter on every spindle; Anodized Drum with prcesion95 mm: 2 Turns with 1.Electronicstop motion Speed Control and anti patterning by Inverter Drive with Panel, AC DrivesLength Control System 2 tum drum Yarn clearer of Uster Without Auto Doffing With over head Blower |
| 18 | Assembly Winding machine equipped with individual drum driven Length measuring device, Individual yarn sensor device, Inverter driven Delivery package etc. 24 positions |
| 19 | Two for One Twisters equipped with Cradle lifting machine, Top tray arrangement; Pot dia 180 mm and 120 mm; Ceramic quoted discs; Stop motion after breakages of yarn; Traverse: 152 mm; Count range: 20 Nm 2/100 Nm, 2/120 Nm; Feed package: Cheese; Twist range: 2.5 TNI to 43 TPIAnti Patterning Device; Delivery package: PSDP or cone TFO package dimension: Package length - 172 mm; Traverse length -163 mm to 165 mm. 36 positions |
| 20 | Gas Singing machine: Individual drum drive; Individual yarn sensor and stop motion; Should have mixing chamber for air and gas; There must be adjustment for air and gas pressure; Should have overhead blower; Should have over feed rollers, 24 Drums |
| 21 | Reeling machine: 80 peg machine, 40 pegs each side Hank dia: 1.37 meter; Equipped with digital counter meter and auto stop after full doff |
| 22 | Bailing Including bailing press Hydraulic pressing System |
| 23 | Bundling Machine: Capacity 5 kg; Hydraulic pressing System |
AI Tender Summary
Tender Timeline
Nov 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender