Tender For Additional Works For Gangai Amman Kovil Community Hall
Tender Value
17 Lakhs
Estimated cost
Bid Submission
09 Nov 2023
0 days left
EMD
17000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
poonamallee → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Additional Works For Gangai Amman Kovil Community Hall
BOQ
| Sl. No. | Item Description |
| 1 | Conducting of Geo Physical Survey for achieve maximum Quantity of water etc. |
| 2 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia(For upto 300mm dia) and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site. Site will be shown by the TWAD Board officers including construction of mud pit. Drilling of 140/150 mm pilot bore upto 60m Depth ending below ground level etc., complete. (TWAD SOR Pg - 279) |
| 3 | Earthwork excavation and depositing on bank with initial lead of 10 metres and initial life of 2 metres hard stiff block cotton hard red earthy shales muran gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as per SS-20B (TWAD SOR Pg - 308) |
| 4 | Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer. Upto 60m depth ending below ground level etc., complete as per standard specification. TWAD SOR Pg - 279) |
| 5 | Supply and delivery of following 180mm dia CS and RS casing pipe as pe IS 12818/2010 . including cost and conveyance of pipes with accessoriesto site etc., complete - CS Casing shallow depth (plain pipe) - (TWAD SOR Pg - 17) |
| 6 | Labour Charges for slotter cutting 180mm dia casing pipe including cost and conveyance of labour and machinary etc., complete as per standard size of slotter cutting as directed by departmental officers.(Quotation) |
| 7 | Labour Charges for inserting 150mm dia ( Casing pipes assembly with slots or with out slots) in the drilled hole including welding the joints etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineers of TWAD Board.(TWAD SOR Pg - 282) |
| 8 | Supply and delivery of following PVC, GI Pipes andSpecials including cost and conveyance of pipes with accessoriesto site etc., complete A) 50mm Upvc pipe (TWAD SOR PG - 19) |
| 9 | 50mm dia Upvc (TWAD SOR PG - 40) |
| 10 | 50mm dia Upvc flange set (TWAD SOR PG - 40) |
| 11 | 50mm dia Upvc Nipple (TWAD SOR PG - 40) |
| 12 | 50mm dia MS clamp set (TWAD SOR PG - 40) |
| 13 | THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START - 2 phase panel board (TWAD SOR PG - 111) |
| 14 | 4sqmm 3core flat cable (TWAD SOR PG - 118) |
| 15 | 100AMS fues carrier (TWAD SOR PG - 177) |
| 16 | 50mm gate valve (TWAD SOR PG - 41) |
| 17 | 7/20 A/U.wise for service connection (TWAD SOR PG - 119) |
| 18 | Supply and delivery of clear water vertical wet type 2HP ( 50 x 175 LPM) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % - 2 HP Submersible pumpset (100X40Lpm) (TWAD SOR PG - 98) |
| 19 | 3\" dia PVC pipe 6ksc(TWAD SOR PG - 16) |
| 20 | 3\" dia PVCcoupling(TWAD SOR PG - 22) |
| 21 | 3\" dia PVCElbow (TWAD SOR PG - 22) |
| 22 | 3\" dia PVCTee (TWAD SOR PG - 22) |
| 23 | 3\" dia PVCBend (TWAD SOR PG - 22) |
| 24 | SupplyandfixingofTNEBmeterboardsuitablefor32Athreephaseserviceconnectionwith3Nos.32Afuseunit(500V)32Aneutrallinkandearthlink(1\"x1/8\"copperflat)onTWplankofsize600mmx450mmx19mmwithsupportingTWreepersof1\"thickaneithersidewithpaintingwithsuitableboltandnutsforfixingtheTWplankonwallwithearthconnectionandinterconnectionwith7/20PVCinsulatedcopperwirefromEBmeter to fuse unit (SD 127) |
| 25 | Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste. For depth upto 2mPVC pipeetc., completed as per specifications. - 90mm dia pvc pipe (TWAD SOR PG - 253) |
| 26 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.. (TWAD SOR PG - 285) |
| 27 | Providing safe guard Arrangements fore borewell using Brickwork in cement morter 1:5 mix Alround the borewell with a minimum space of90x60cm, plastering in side and out site cm.(Quotation) |
| 28 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 29 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 30 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 31 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 32 | Supplying and fixing in position Cement basedhydrualically pressed Anti-Skid tiles (pattern design) 20mm thick in cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointedwith same colour of cement etc., complete as per standard specification |
| 33 | Dismantling, clearing away and carefully stackingmaterials useful for re-use for any thickness of walls Terracing work in roof or floor |
| 34 | Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 35 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\" X 43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 36 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 37 | Supplying & fixingdoor shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive ofthreee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete. |
| 38 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 39 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mm x 100mm x 75mm MS switch box with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point SD 12 |
| 40 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open MS conduit Light point / fan point (for electronic regulator) (4 points / Coil) Higher End |
| 41 | Supply and fixing of 16A 3 Pin Switched Socket - 3 Module etc,. |
| 42 | Supply and fixing ofWALL MOUNTING FAN 450mm Sweep etc, |
| 43 | Supply and fixing of 1200mm (48\") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\" SD-106 |
| 44 | Supply and fixing of 32W LED Tube Light for T8 Fitting (Single Side) Pg No 13 SD |
| 45 | Supply and delivery and fixing of HDPE tank 2000 litres as per IS 12701 / 1996 including loading,unloading, transportation and labourcharges for fixing of the GI pipes andspecials for pipe connection works includingcutting, threading and fixing charges etc., |
| 46 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \"U\" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] |
| 47 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 48 | Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
AI Tender Summary
Tender Timeline
Nov 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 09, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender