Rural Works Department has published Tender For Up Gradation Of Road From 4.00 Km Pt Of Anelieh Pmgsy Road To Wanli Waste Plastic (Upgradation). Submission Date for this Tender is 21-11-2023. Road Work Tenders in Dibang Valley Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | (1) Construction of reference pillars as per Fig. 1600.1 (b) as per drawing and Technical Specification Clause 1602.1 |
| 2 | (2) Construction of back piller as per Fig. 1600.1 (c) as per drawing and Technical Specification Clause 1602.3 |
| 3 | (3) Construction of Job pillers as per Fig. 1600.1 (d) and Technical Specification Clause 1602.4 |
| 4 | Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means (A) In area of Non-Thorny Jungle |
| 5 | Widening of Earthwork in Hill Road (ii) Excavation in Hilly Areas in Soil by mechanical means (A) Excavation for Roadway in soil by Mechanical Means including Cutting and trimming of Side Slopes and disposing of excavated earth with lift upto 1.5 m and lead upto 20m as per Technical Specification Clauses 1603.1 |
| 6 | Widening of Earthwork in Hill Road Excavation in Hilly Areas in Ordinary Rock by mechanical means not requiring blasting by Mechanical Means including Cutting and trimming of side slopes and disposal of cut material with a lift upto 1.5 m and lead upto 20 m as per clauses 1603.2 |
| 7 | Cross Drainage CD (1.5m, 2.00 m, 4.00 m, 6.00 m, Retaining/Breast wall, CC Drain |
| 8 | Excavation in soil in Hilly Area by manual means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per drawing and Technical Specification Clause 1603.1 |
| 9 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side. (i) Ordinary Soil. (ii) Upto 3 m depth. |
| 10 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. I). P.C.C grade M 10 (I) Nominal mix 1:3:6 |
| 11 | Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. II) Coursed Rubble Masonry (1st sort). ii) In 1:4 Cement mortar. |
| 12 | Stone masonry in cement mortar 1:5 |
| 13 | SUBSTRUCTURE |
| 14 | Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 II) Coursed Rubble masonry (2nd Sort) (iii) In cement mortar (1:5) |
| 15 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 I)Granular material |
| 16 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing |
| 17 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 For height upto 5 m. III) R.C.C. grade M 20 |
| 18 | Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and technical specification Clauses 615, 710and 1204.3.11 |
| 19 | SUPERSTRUCTURE |
| 20 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 I) R.C.C grade M 20 (I) Nominal mix 1:2:4 |
| 21 | Providing & laying reinforced cement concrete in superstructure complete as per drawings and technical specification Clauses 800,1205.4 and 1205.5 RCC Grade - M -25 |
| 22 | Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 |
| 23 | Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1204. (A) Cement mortar1:3 (1cement :3 sand) |
| 24 | Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 .Brick masonry in 1:3 cement mortar Exposed surface |
| 25 | Cement plaster 15 mm thick 1:4 on stone masonry |
| 26 | Pavement Part A) Earthen Shoulders |
| 27 | Constrution of embankment and sub-graded earthen shoulder with approved material obtained from borrow pits with a lift upto 1.5 m and lead , transporting to site spreading, grading to required slope and compact to meet requirement of tables also loosening, levelling and compacting original ground supporting embankment to facilitate placement of first layer of embankment, sacrified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300.1 and 300.2 with lead upto 1000 m as per technical specification clause 301.4.1 |
| 28 | Granular Sub-base with Well Graded Material (Table 400.1) |
| 29 | By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401.For Grading III Materials |
| 30 | WBM-III for Base Course(75mm) |
| 31 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. A) By manual means.WBM-IIITherefore Qty. of WBM3 of grade-III (53-22.4mm) @ 75mm Thick |
| 32 | Prime Coat |
| 33 | Providing and applying primer coat with Bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502. |
| 34 | Tack coat |
| 35 | Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 36 | Mix Seal Surfacing(MSS) |
| 37 | Mix Seal Surfacing : Providing, laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 |
| 38 | Road furniture Providing and Fixing "Logo" of PMGSY Project |
| 39 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 40 | Providing and Fixing Title information Board of PMGSY Project(RCC) |
| 41 | Providing and fixing of typical PMGSY Citizen information sign board as per MORD specifications and drawing of cast-in-situ RCC, (size of RCC post 25 cm x 25 cmx 90 cm below G.L. & 15 cm x 15 cm x 24 cm above G.L.), (size of board 2 x 90 cm x 80 cm x 7.7 cm) incl. earth work, finishing with 15 mm plaster 1 : 4 and neat cement punning, applying priming coat, painting and lettering with appropiate colour with required shade of approved quality ready mix paint. |
| 42 | Safety Devices and Signs in Construction Zones Provision and fixing of traffic signs for limited period at suitable locations in construction zone comprising of warning zone, approach transition zone, working zone and terminal transition zone with a minimum distance of 2-3 m from the edge of the carriageway. The bottom edge of the lowest sign plate to be not less than 2 m above the road level, fixed on 600 mm x 600 mm x 6 mm angle iron post, founded and installed as per approved design and drawings, removed and disposed of after completion of construction work, all as per IRC:SP:55-2001. |
| 43 | Traffic sign ahead |
| 44 | Men at work |
| 45 | Road closed |
| 46 | Stop |
| 47 | Slow |
| 48 | Speed limit |
| 49 | Diversion one km ahead |
| 50 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 |
| 51 | a]5th Kilometre Stone (precast) |
| 52 | b] Ordinary 1 Km. stone (Size - 66 x 35 x 25 cm) |
| 53 | c] 200 Mtr stone (precast) |
| 54 | Routine Maintenance |
| 55 | First Year |
| 56 | Second Year |
| 57 | Third Year |
| 58 | Fourth Year |
| 59 | Fifth Year |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
