Tender For Repairs/Replacement Of Old Vintage Ci/Gi/Di Pipe Line, Sluice Valves, Air Release Valves,Valve Chamber And Other Connected Items In Zone-Ii (Ep Barrack, Apps, Office Complex, Crlc, Domestic Line, Police Line, Cmph, Gunjkheda & Mh) In Ra And Per
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Nov 2023
0 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pulgaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs / Replacement Of Old Vintage Ci / Gi / Di Pipe Line, Sluice Valves, Air Release Valves, Valve Chamber And Other Connected Items In Zone-Ii ( Ep Barrack, Apps, Office Complex, Crlc, Domestic Line, Police Line, Cmph, Gunjkheda & Mh ) In Ra And Perimeter Area Under Ge Pulgaon
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches by mechnical means (hydraulic excavator) not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all kind ofsoil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, leveling watering and well ramming in layers of soil not exceeding 25cm complete all as specified and as directed. |
| 3 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of rock complete all as specified and as directed. |
| 4 | Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store or staking at site |
| 5 | All as per item No. 4…..But for 20 mm bore |
| 6 | All as per item No. 4…..But for 25 mm bore |
| 7 | All as per item No. 4…..But for 40 mm bore |
| 8 | All as per item No. 4…..But for 50 mm bore |
| 9 | All as per item No. 4…..But for 80 mm bore |
| 10 | Refixing/laying old steel tubing and connections of 15mm bore in new or old positons (wall/ ceiling, floor, intrenches etc) threading, rethreading and with fittings all as directed. |
| 11 | All as per item No. 10…..But for 20 mm bore |
| 12 | All as per item No. 10…..But for 25 mm bore |
| 13 | All as per item No. 10…..But for 40 mm bore |
| 14 | All as per item No. 10…..But for 50 mm bore |
| 15 | All as per item No. 10…..But for 80 mm bore |
| 16 | Supply and fixing/laying 15mm dia GI tube medium gradewith all fitting and fixed complete to wall, tubing and ceilings or laid in floor/ trench. |
| 17 | All as per item No. 16…..But for 20 mm bore |
| 18 | All as per item No. 16…..But for 25 mm bore |
| 19 | All as per item No. 16…..But for 40 mm bore |
| 20 | All as per item No. 16…..But for 50 mm bore |
| 21 | All as per item No. 16…..But for 80 mm bore |
| 22 | Supply and fixing in replacement of gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed of 15mm bore. |
| 23 | All as per item No. 22…..But for 20 mm bore |
| 24 | All as per item No. 22…..But for 25 mm bore |
| 25 | All as per item No. 22…..But for 40 mm bore |
| 26 | All as per item No. 22…..But for 50 mm bore |
| 27 | M&L for CI special/fittings suitable for CI flanged/socket ends pipe upto 80 to 150 mm bore dia such as bends, (any radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) tee piece, single branch \"Y\" junction, double branch, cross (all flanged), collars, caps & plug, tail pieces, reducers, mechanical joint, etc. complete all as specified and as directed, |
| 28 | M&L for CI special/fittings suitable for CI flanged/socket ends pipe upto 200 to 300 mm bore dia such as bends, (any radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) tee piece, single branch \"Y\" junction, double branch, cross (all flanged), collars, caps & plug, tail pieces, reducers etc. complete all as specified and as directed. |
| 29 | Taking up old U/Shume pipe line/CI/GIof 80 mm bore any type water mains pipes, any class,(including all fittings),disconnecting pipes and fittings complete |
| 30 | All as per item No. 29…..But for 100 mm bore |
| 31 | All as per item No. 29…..But for 150 mm bore |
| 32 | All as per item No. 29…..But for 200 mm bore |
| 33 | Relayingonly old pipe in good condition/pipe taken out from trenches for repairsin any length including fittings etc. of size 80mm bore. |
| 34 | All as per item No. 33…..But for 100 mm bore |
| 35 | All as per item No. 33…..But for 150 mm bore |
| 36 | All as per item No. 33…..But for 200 mm bore |
| 37 | Supply and fix cast iron pipes with spigot and socket ends centrifugally casted class LA in any length suitable for rubber tytan joint and Laid in trenches of 80 mm bore complete all as specified and as directed. |
| 38 | All as per item No. 37…..But for 100 mm bore |
| 39 | All as per item No. 37…..But for 150 mm bore |
| 40 | All as per item No. 37…..But for 200 mm bore |
| 41 | M&L for Run lead jointfor spigot socketcast iron pipes and fitting, including caulking properly and making joint leak proof of 80 mm bore complete all as specified and as directed. |
| 42 | All as per item No. 41…..But for 100 mm bore |
| 43 | All as per item No. 41…..But for 150 mm bore |
| 44 | All as per item No. 41…..But for 200 mm bore |
| 45 | All as per item No. 41…..But for 300 mm bore |
| 46 | M&L for burning out lead joint in position , including removing lead to store / stacked at site to issue under credit for 80 mm bore complete all as specified and as directed. |
| 47 | All as per item No. 46…..But for 100 mm bore |
| 48 | All as per item No. 46…..But for 150 mm bore |
| 49 | All as per item No. 46…..But for 200 mm bore |
| 50 | All as per item No. 46…..But for 300 mm bore |
| 51 | Taking out old US sluice valves and supply and fix of new sluice valve PN-1.0 heavy duty ISI marked as per (IS-14846) with flanged ends with 02 Nos of rubber gaskets, nut bolts and washers along with SS spindle and operating wheel of 80 mm size complete all as specified and as directed |
| 52 | All as per item No. 51…..But for 100 mm bore |
| 53 | All as per item No. 51…..But for 150 mm bore |
| 54 | All as per item No. 51…..But for 200 mm bore |
| 55 | M&L for rubber tyton joints for suitable for sockets and spigot CI pipes including rubber gasket for80 mm bore complete all as specified and as directed. |
| 56 | All as per item No. 55…..But for 100 mm bore |
| 57 | All as per item No. 55…..But for 150 mm bore |
| 58 | All as per item No. 55…..But for 200 mm bore |
| 59 | Taking out sluice valves refacing, regrinding and refixing including Repacking stuffing box ofsluice valve spindle including taking apart and reassembling of 200 MM complete all as specified and directed. |
| 60 | Taking out sluice valves refacing, regrinding and refixing including Repacking stuffing box ofsluice valve spindle including taking apart and reassembling of 150 MM complete all as specified and directed. |
| 61 | Taking out sluice valves refacing, regrinding and refixing including Repacking stuffing box ofsluice valve spindle brass including taking apart and reassembling of 80 MM complete all as specified and directed. |
| 62 | M&L in repair of 80 to 100 mm bore rusted & crack CI water branch connection by using mechanical joint with connecting all accessories for following size all as directed :-Note :(i)cost ofgasket and nut bolts ,washers\"jointing of materials as required are inclusive in above job.ii)Required T&P for job is provided by the Contractor is deemed to be included in the item rate.(iii)Excavation for pipe is included in job Work. |
| 63 | M&L in repair of 150 to 300 mm bore rusted & crack CI water branch connection by using mechanical joint with connecting all accessories for following size all as directed :-Note :(i)cost ofgasket and nut bolts ,washers\"jointing of materials as required are inclusive in above job.ii)Required T&P for job is provided by the Contractor is deemed to be included in the item rate.(iii)Excavation for pipe is included in job Work. |
| 64 | M&L for dismantling oldvalve chamber and construction of brick masonary new valve pit chamber of size 900mmx900mmx900mm (internal ) size constructed with 100mm thick PCC (1:4:8) type D2 lean concrete foundation (using 40mm graded stone aggregate) providing well burnt brick masonary wall of 230mm thick built in CM (1:6) , rendering in cement (1:6) finished even smooth using extra cement internally and 15mmthickin CM (1:4) external plasterand finished fair and even,supply and fix 3.15 mm thick MS sheet steel cover fixed on (50x50x6) mm thick angle ironframe embeded in PCC coping (1:2:4) type B1 with locking arrangement and 1 No 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of (25 x 6) mm flat iron and applyingtwo coats of synthetic enamel paint of approved shade over a coat of primer (Red Oxide) to all exposed steel surface making good all disturbed surface to matchsurrounding complete all as specified and directed. |
| 65 | M&L for dismantling old valve chamber and construction of brick masonarry new valve pit chamber of size 1200mmx1200mmx1200mm (internal ) size constructed with 100mm thick PCC (1:4:8) type D2 lean concrete foundation (using 40mm graded stone aggregate) providing well burnt brick masonary wall of 230mm thick built in CM (1:6) , rendering in cement (1:6) finished even smooth using extra cement internally and 15mmthickin CM (1:4) external plasterand finished fair and even,supply and fix 3.15 mm thick MS sheet steel cover fixed on (50x50x6) mm thick angle ironframe embeded in PCC coping (1:2:4) type B1 with locking arrangement and 1 No 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of (25 x 6) mm flat iron and applyingtwo coats of synthetic enamel paint of approved shade over a coat of primer (Red Oxide) to all exposed steel surface making good all disturbed surface to matchsurrounding complete all as specified and directed. |
| 66 | Dismantaling of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 67 | M&L for Cement concrete 1:2:4 B-2 using 40mm graded stone aggregatein foundations,filling and mass concrete complete all as specified and as directed. |
| 68 | Supply and fix in replacement ball valves of size 15mm bore high pressuremade out of PTMTMake- Prayag/Symet complete with epoxy coated Aluminium rod, high density ball etc complete all as specified and as directed. |
| 69 | All as per item No. 69…..But for 20 mm bore |
| 70 | All as per item No. 69…..But for 25 mm bore |
| 71 | S&F in replacement of single core copper conductor cable PVC sheathed including flexible PVC conduit for motor connection of size 25 sqmm complete with connection plate and lugs etc as directed and specified. |
| 72 | do- all as per item no 72 above but for 35 sqmm complete all as specified and directed |
| 73 | do- all as per item no 72 above but for 35 sqmm complete all as specified and directed |
| 74 | S&F in repair Mild steel work in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work con- forming to Fe.290.Gde-E-165 |
| 75 | Testing ofTreated water (Drinking water)sample as per IS - 10500 including collecting of sample from the pump house and handed over it to the authoriesed lab for the testing purpose all as specified and directed. |
| 76 | Testing ofRaw watersample as per IS - 10500 including collecting of sample from the pump house and handed over it to the authoriesed lab for the testing purpose all as specified and directed. |
| 77 | Horizontal Boring hole for crossing metaled road or footpath for GI/CI pipe of any size and making connection all as directed and specified. |
AI Tender Summary
Tender Timeline
Nov 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender