Tender For Special Repair Work Of Semikheda Baraur To Mahmoodpur Road (V.R.) In Distt. Bareilly, bareilly-Uttar Pradesh

Tender For Special Repair Work Of Semikheda Baraur To Mahmoodpur Road ( V.R. ) In Distt. Bareilly; 1 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Threewheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 ( With 22.4 - 53 Mm Size St. Ballast ) As Per Technical Specification Clause 405. 2 Providing And Applying Primer Coat With Bitumen Emulsion ( Ss-2 ) On Prepared Surface Of Granular Base Including Cleaning Of Road Surface And Spraying Primer At Rate Of 0.70 Kg / Sqm Using Mechanical Means As Per Technical Specification Clause 502. 3 Providing And Applying Tack Coat With Bitumen Vg-10 Using Emulsion Distributor At The Rate Of 0.30 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer As Per Technical Specification Clause 503. 4 Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Type As Per Technical Specification Clause 508 ) 5 Providing And Laying Seal Coat By Manual Means With Vg-10 Grade Bitumen Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type C As Per Technical Specification Clause 510. 6 Construction Of Un Reinforced Dowel Jointed At Expension And Construction Joint Only, Plain Cement Concrete Pavement Thickness As Per Design Over Aprepared Sub Base With 43 Grade Cement M 30 Grade Coarse And Fine Agg Conforming To Is 383 Max Size Of Coarse Agg Not Exceeding 25 Mm Mixed In A Concretemixer Of Not Less Then 0.2 Cum Capacity And Appropriate Way Batcher Using Approved Mix Design , Laid In Approved Fixed Side Foam Work ( Steel Channel ) , Laying And Fixing Of 125 Micron Thick Polythene , Wages, Steel Plate Including Levelling Foam Work As Per Drawing , Spreading Concrete With Showels , Rakes, Compacted Using Needle , Plate Vibrator And Finished In Continious Operation Including Provision Of Contraction And Expension , Construction Joints , Primer Sealent , Dowel Bars For 14 Days Curing Compound And Water Finishing To Lines And Grade As Per Drawing And Tech Specification Clause1501. 7 Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	06-Nov-2023	Date Corrigendum	Date	17-11-2023

INR 2725 /-

INR 401000.0 /-

INR 40.10 Lakhs /-

Name of Work:-Special Repair work of Semikheda Baraur to Mahmoodpur Road (V.R.) in Distt. Bareilly

Sl. No.	Item Description
1	Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 (with 22.4 - 53 mm size st. ballast) as per Technical Specification Clause 405.
2	Providing and applying primer coat with Bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70 Kg/Sqm using mechanical means as per Technical Specification Clause 502.
3	Providing and applying tack coat with Bitumen VG-10 using emulsion distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer as per Technical Specification Clause 503.
4	Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type as per Technical Specification Clause 508)
5	Providing and laying seal coat by manual means with VG-10 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.
6	Construction of Un reinforced dowel jointed at expension and construction joint only,plain cement concrete pavement thickness as per design over aprepared sub base with 43 grade cement M 30 grade coarse and fine agg conforming to IS 383 max size of coarse agg not exceeding 25 mm mixed in a concretemixer of not less then 0.2 cum capacity and appropriate way batcher using approved mix design , laid in approved fixed side foam work (steel channel), laying and fixing of 125 micron thick polythene , wages, steel plate including levelling foam work as per drawing , spreading concrete with showels , rakes, compacted using needle , plate vibrator and finished in continious operation including provision of contraction and expension , construction joints , primer sealent , dowel bars for 14 days curing compound and water finishing to lines and grade as per drawing and tech specification clause1501.
7	Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.