|
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil for laying cables / pipes / erection of poles etc complete all as specified and directed. |
| 2 | Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point etc complete all as specified and directed. |
| 3 | Returning filling in soil including spreading levelling watering, well ramming in layers not exceeding 25 cm each etc complete all as specified and directed. |
| 4 | Supply and fix GI Octagonal pole of 6 mtrs high with base plate, with nuts and bolts for fixing of solar street light of silver colour and stickering for mentioning pole no\"s including suitable bracket and all necessary fixing arrangements suitable for fixing of solar light fitting etc complete all as directed by EIC. |
| 5 | M & L for PCC 1:3:6 type, type C-2 (using 40 mm graded stone aggregate)in foundation, for making good the disturbed portion of road/floor/platform etc including necessary form work including fixing of bolts for mounting of pole etc complete all as specified and directed. |
| 6 | Supply and fix of 30 Watts all in one solar street light made with high efficiency Mono crystaline solar PV module, Lithium Ferro Phosphate battery with, high efficacy LED, MPPT solar charge controller and Aluminium Extruded body & specially programmed to automatically control the dimming and brightness of light which increase the backup time etc complete all as specified and directed by EIC.Make: Havells or equivalant in specified makes as approved. |
| 7 | Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement complete all as specified and directed. |
| 8 | Supply & lay LT UG cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area as mentioned below etc complete all as specified and directed.(a) 2 Core 6 SqmmNote :- 1. Cost of lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board.2.Excavation & earth work. shall be measured & paid separately under relevant items. |
| 9 | Supply & laying of PVC insulated copper cable, unarmoured, 1100 volts grade, of size 3 Core 2.5 sqmm all as directed by Engr-in-Charge. |
| 10 | Supply and fix PVC Rigid conduit of size 20 mm external dia including of boxes fixed on pole duly clamped with MS clamps in Each 1 mtr gap incl nuts, bolts & washers (terminal and junction) and all other accessories such as tees, bends, mouth tube ends etc all as directed by EIC. |
| 11 | M & Lfor GI pipe 50mm dia light grade laid in road crossing / on wall / on pole for cable protection etc complete all as specified and directed. |
| 12 | Material and labour for cutting of bituminous road / floor for laying of pipe / cables 45 CM wide and not exceeding 1.5meterdeep including refilling / with material and watering well ramming / compacting and making good with PCC 1;2;4, type B-1, 100 mm thick complete all as specified anddirected by Engr-in-Charge. |
| 13 | S & Fix outdoor type FRP junction box light weight suitable for pole mounting inclduing MCB SPN 6 Amps single pole, flat iron clamp duly painted with two coats of aluminium paint over a coat of red oxide primer and GI nut, bolts, washers and necessary connector for loop in loop out cable connection and suitable size galnds, of size 200 x 140 x 95 mm. Make - SINTEX or equivalant & approved. |
| 14 | Supply and FixBollard LED light warm / white (as directed) 10 Watts New generation, energy saving, environmental friendly, long life aesthetically designed landscape luminaire for lighting with high power LED as light source including excavation, PCC foundation and suitable water proof junction box for connecting the lights etc complete all as specified anddirected by Engr-in-Charge.Make : Havells : Model : UFO LED Bollard or equivalant in specified makes as approved. |
| 15 | Supply and Fix of not less than 8 Watt 4 way illumination wall light LED warm / white (as directed) including drilling, fixing and installing on the exisiting wall surface, already tiled walls including all necessary fixing arragments all as specified and directed by Engr-in-Charge. |
| 16 | Supply and Fix9 W Spike LED light warm / whilte (as directed) environmental friendly, long life compact, light weight, energy saving using COB LED as light source including excavation, PCC foundation and suitable water proof junction box for connecting the lights etc complete all as specified anddirected by Engr-in-Charge.. |
| 17 | M & L for submain wiring alongwith earth wire of size 2x4.0 sq mm and 1x4 sq mm as earth wire FRLSPVC insulatedcopper conductor single core cable , multistrandedon the surface through and including suitable size ofPVC casing and cappingwith its accessories all as specified and directed by Engr-in -charge. |
| 18 | M & Labour for Cutting holes depth n.exc 60 cm and dia not exc 30 mm into or through cement concrete slabs, chajjas, concrete walls / decorative etc. reinforced suitable for inserting and including 20 / 25 mm PVC conduit and making good surface all as directed by Engr-in-Charge.Note : Any damage to existing decorative tiles / walls will be mathched as per existing without any extra cost. |
| 19 | M & L Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 20 | M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in CM 1:6, complete all as specified and as directed. |
| 21 | M&L for cement concreate 1:3:6 type C1, (using 20mm graded stone aggregate) as in coping for drain work and similar works including necessary form work and finishing the surfaces even & smooth without using extra cement complete all as specified & directed. |
| 22 | M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in surface channels,drains, all as specified & directed. |
| 23 | M&L for rendering 15mm thick on precast cement concrete block masonry with solid blocksurface in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 24 | M&L precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6 complete all as specified and as directed. |
| 25 | S&F TMT bars 6mm to 8mm dia, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia. complete all as specified and as directed. |
