Military Engineer Services-MES has published Tender For Repairs To Hardstanding, Pcc Pavement, Stone Pitching, Retaining Wall And Fencing At Nad Bheemunipatnam And Repairs To Flooring, Plasterings, Ceilings, Metal Doors, Ss/Ms Railings, Ladders, Att And Connected Items To Certain Buildings In T. Submission Date for this Tender is 24-11-2023. Road Work Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-11-2023 |
| Sl. No. | Item Description |
| 1 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) |
| 2 | Taking down Chowkhats or frames exc. 1.5 sq. m but n exc 4.0 Sqm each with shutters (without taking off shutters from the frames) |
| 3 | Taking down Aluminium door shutters of any description exc 01 Sqm but n.exc 4.00 Sqm complete all as specified and as directed. |
| 4 | Taking down Aluminium Window/ Ventilator shutters (Sliding / Hunged) of any description exc 0.50 Sqm but n.exc 2.00 Sqm complete all as specified and as directed. |
| 5 | Taking down shutters of any description not exc 01 Sqm each, complete all as specified and as directed. |
| 6 | Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed. |
| 7 | S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.. |
| 8 | S&F angle iron/ Flat iron work as in hold fasts including fixing with screws conforming to Fe-290 Gde-165 completed all as specified and as directed. |
| 9 | Material labour for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregatesas in hold fast block complete. |
| 10 | S & F for 2nd class Hard wood , factory made, 35 mm thick plain framed, panelled shutters ( Twopanels),with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particles board with commercial veneering on both faces. the size of rail and stile as per IS 2009 (part-I) |
| 11 | Supply and fix 30mm thick flush shutters solid core construction with particle board core and plywood face panels, one face covered with decorative face veneer with lipping / frame to match complete all as specified and as directed. |
| 12 | M & L for 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain,chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); |
| 13 | S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Ivory colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing |
| 14 | S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rail, MSframe shall be covered with heat moulded Ivory colour PVC "C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beadingand jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification and shown on drawing in SSR Part II 2020. |
| 15 | Supply and fix 125 mm size butt hinges, medium weight, stainless steel and fixed with stainless steel screws. complete all as specified and as directed. |
| 16 | Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed with stainless steel screws. complete all as specified and as directed. |
| 17 | S & F of 100mmAluminium anodised, barrel tower bolts of extruded section and fixed with stainless steel screws. |
| 18 | S & F of 150mmAluminium anodised, barrel tower bolts of extruded section and fixed with stainless steel screws. |
| 19 | S & F in repairs of 200mmAluminium anodised, barrel tower bolts of extruded section and fixed with stainless steel screws. |
| 20 | S & F Aluminium handles, cast type, anodised of size 100 mm with stainless steel screws. |
| 21 | S & F Aluminium handles, cast type, anodised of size 150 mm with stainless steel screws. |
| 22 | Supply and fix250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.. |
| 23 | Supply and fix200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.. |
| 24 | Supply and fix150mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.. |
| 25 | S & F for UPVC ,(unplastisized poly-Vinyl Chloride) sliding windows (3 track) frame multi-chambered and stiffened framed, using 88mm x 52mm size sections all-round as main frames fixed the window unit to the existing masonry wall/ Marble/ Granite with anchor fasteners without damaging as required. The frames shall be reinforced with GI profiles of thickness 1.25mm the entire window, The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified and as directed. |
| 26 | S&F UPVC Sliding window shutters, Three track, (2 No x Glazed & 1 No x wire mesh), White Colour of area not exceeding 2.0 Sq.m, made with extruded profile sections with wall thickness of 2.3mm±0.2mm of size 57mm x 42mm fixed to UPVC frame, shutters shall have well defined welded corner joints without any gaps, The shutters shall have necessary handles, arrangement to drainage of water and other associated fittings to facilitate smooth operation. The shutters shall be reinforced with GI profiles of thickness 1.25mm including fixing glass and wire mesh complete all as specified and as directed. Make : Rajshri Plastiwood/Sintex/Duroplast Extrusion Pvt. Ltd. (i) The unit rate quoted by the contractor includes cost of fixing of glass panes and wire cloths including all other connected accessories. (ii) The Glass Panes and wire mesh shall be measured and paid separately under relevant item as supply only. (iii) The size of UPVC sections specified in the description of item is minimum requirement, if the same size of section is not available, next higher size shall be provided by the contractor without any extra cost to the Department. |
| 27 | Providing and fixing factory made uPVC white / colour casement window frame for Ventilator (Size - 60 mm x 58 mm ), made of extruded profiles. Profiles of frameswill be mitered cut and fusion welded at all corners , 1.2 + 0.2 mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete and as directed. Make : Rajshri Plastiwood/ Sintex/Duroplast Extrusion Pvt. Ltd |
| 28 | S&F UPVC Side/Top hung shutters, White Colour of area not exceeding 2.0 Sq.m, made with extruded profile sections with wall thickness of 2.3mm±0.2mm of size 57mm x 42mm fixed to UPVC frame, shutters shall have well defined welded corner joints without any gaps, The shutters shall have necessary handles, arrangement to Drainage of water and other associated fittings to facilitate smooth operation. The shutters shall be reinforced with GI profiles of thickness 1.25mm including fixing glass and Wire mesh complete all as specified and as directed. (i) The unit rate quoted by the contractor includes cost of fixing of glass panes and wire cloths including all other connected accessories. (ii) The Glass Panes and wire mesh shall be measured and paid separately under relevant item as supply only. (iii) The size of UPVC sections specified in the description of item is minimum requirement, if the same size of section is not available, next higher size shall be provided by the contractor without any extra cost to the Department. |
| 29 | Supply and fix rolled mild steel Fe-410-w (grade E-250) quality, A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work, GI frames fixed to the window to existing masonry wall/ Marble/ Granite with anchor fasteners without damaging complete all as specified and as directed. |
| 30 | S&F powder coatedaluminium sliding window with three track outer frame suitable for sliding aluminium shutters, weight of aluminium sectionnot less than 0.55Kg/M of three track frame, including necessary joining cleats glazing clips rubber packing Powder coatedaluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement , handle, aluminium grill ofaperture size 50mm and4mm dia etc complete all as specified. |
| 31 | Supply and fix powder coated anodised aluminium glass louver /ventilators with blades of 10mm heavy duty with lever handle etc complete all as specified and directed.(Note- Glass shall be measured and paid separately) |
| 32 | M&L for powder coated aluminium door shutters, aluminium sectionfor top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, powder coated aluminium hinges, powder coated aluminium snap beading, screws etc, complete all as specified and directed. |
| 33 | Supply and fixpowder coated aluminium framefor doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etccomplete all as specified and directed. |
| 34 | M&L for powder coated aluminium frame for doors fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc completeall as specified and directed. |
| 35 | M & L for 2nd class hardwood Plain fillets, square, rectangular or triangular in section of size exc 13 Sqcm but n.exc 25 Sqcm, clean sawn, secured with nails or brads |
| 36 | S&F for 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work including all-round 10mm thick polished plain beading complete all as specified and as directed. |
| 37 | S&F continuous (piano) hinges, Brass bright finish with width of flat (when open) in 30mm, complete all as specified and as directed |
| 38 | S&F Stainless steel magnetic catcher for fixing in cupboard, to hold the shutter in closed position, complete all as specified and directed |
| 39 | S&F of 40 mm dia, stainless steel cupboard knobs fixed with nut, screw and washer of Stainless steel, fancy type bright finished, complete all as specified and directed |
| 40 | M&L for hasp and staple Aluminium anodized,incl bolt to hinge plate and fixed with screws 100 mm long. |
| 41 | Dismantling timber scantling below 40 sqcm in section in any position as in framed / unframed works such as Doors, Cupboards, Windows, fillets etc, complete all as specified and as directed. |
| 42 | M & L for 2nd class hardwood Plain fillets, square, rectangular or triangular in section of size exc 03 Sqcm but n.exc 06 Sqcm, clean sawn, secured with nails or brads |
| 43 | Supply only 5.00mm thick Sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 44 | All as per item No. 43 but frosted glass 4.00mm thick |
| 45 | Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed. |
| 46 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/ Aluminium/ UPVC frames, glazed with putty or fixed with beads, complete all as specified and directed |
| 47 | All as per item No. 46 but frosted glass 4.00mm thick |
| 48 | S & F in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed. |
| 49 | S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed |
| 50 | S&F in repairs of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed |
| 51 | S&F Rubber bush of 25mm long fixed to door complete all as specified and directed. |
| 52 | S&F Rubber Strip of 40mm Width and length 0.6m-1.2m fixed to door bottomcomplete all as specified and directed |
| 53 | S&F in repairs to 125 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 54 | M&L for easing of Wooden Door shutters of any size exc 1.00 Sqm but n.exc 3.00 Sqm for easy closing/ opening / tightening of hinges or changing the position of hinges, chiselling sides wherever required including making good with painting, adjustment of tower bolts, handles and sliding door bolts etc. all complete all specified . |
| 55 | M & L for Repair of Aluminium Door shutters by removing the shutter from frame and refixing after repairs in same opening of any size exc 1.00 Sqm but n.exc 3.00 Sqm for easy closing, opening, tightening of corner angles, tightening of hinges or changing the position of hinges, adjustment of tower bolts, peg stays, handles and sliding door bolts etc. all complete all specified. Note : Rate including supply and fixing of damaged Cleats and Beadings. |
| 56 | M&L for easing of Wooden Window shutters of any size exc 0.50 Sqm but n.exc 3.00 Sqm for easy closing/ opening / tightening of hinges or changing the position of hinges, chiselling sides wherever required including making good with painting, adjustment of tower bolts, handles and sliding door bolts etc. all complete all specified . |
| 57 | M & L for Repair of Aluminium Window (Sliding or Hanging / Ventilator shutters by removing the shutter from frame and refixing after repairs in same opening of any size exc 0.50 Sqm but n.exc 3.00 Sqm for easy closing, opening, tightening of corner angles, tightening of hinges or changing the position of hinges, adjustment of tower bolts, peg stays, handles and sliding door bolts etc. all complete all specified. Note : Rate including supply and fixing of damaged Rollers, Peg stays and Beadings. |
| 58 | Dismantling cast iron/ wrought iron or mild steel work of any description complete all as specified and as directed. |
| 59 | S & F Fe 410 W (Gde-E 250 Quality-A ) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ladders etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 60 | M&L for painting of new steel Surfaces of any descriptionexc 10cm in width of girth not otherwise described two coat of synthetic enamel over a coat of red oxide, zinc chromate primer |
| 61 | Supply and fixing in repairs Aluminium extruded section Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specifiedand directed. |
| 62 | Supply and fixin repairfortoughened glass of 12 mm thick of any colour as directed by GE as in doors, partitions, windows, bathing cubicalwith sliding dooretc with Kolf SAFEX or OZONE fittings accessories like handle, door machine and all necessary required accessories/fitting for fixing complete all as specified and directed. |
| 63 | S&F in repairs floor door stopper150mm (overall length of cover plate) of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 64 | M & L ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/ hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same. |
| 65 | Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed. |
| 66 | M & L for Ist or premium or standard quality of non skid, ceramic coloured joint free tiles of size area of each tile exceeding 0.18 sqm but not exceeding 0.38 and thickness 7-8mm, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete of item all as directed. |
| 67 | M & L for Ist or premium or standard quality of non skid, ceramic coloured joint free tiles of size area of each tile exceeding 0.18 sqm but not exceeding 0.38 and thickness 7-8mm, as in vertical surfaces such as walls, shelves sides etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 10mm thick rendering with CM 1:4 complete all as specified and as directed. |
| 68 | M & L for non skid, ceramic “coloured” joint free tiles of size area of each tile exceeding 0.06 sqm but not exceeding 0.11 and thickness7-8mm, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete all as specified and as directed. |
| 69 | M & L for glazed ceramic coloured tiles 300 x 450 x 7mm thick as in vertical surfaces set & jointed in neat cement slurry & pointed with coloured cement to matchover 10 mm thick rendering with CM 1:4 all as specified & directed. |
| 70 | Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 71 | Material and labour for rendering (Internal Surfaces) 15mm thick in CM (1:6) on fair faces ofbrickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 72 | Material and labour for rendering (External surfaces) 10mm thick in CM (1:4) on fair faces ofbrickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 73 | M & L for preparation of new plastered surface (internal walls) and applying two coats of oil bound distemper over a coat of alkali resistant primer over wall care putty of 1mm thick with rollercomplete all as specified and as directed. |
| 74 | M & L for preparation of new plastered surfaces (External walls) and applying two coats of Cement base paint over a coat of alkali resistant primer with smooth roller machine complete all as specified and as directed. |
| 75 | M & L for preparing new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed . |
| 76 | S&F in repairs mortice lock of size 100mm aluminium, 4 lever type, duly fixed in aluminium door, complete all as specified and directed |
| 77 | Uprooting of wild trees such as grasses/ bushes etc. from the roof/wall surfaces/AC sheet/soil pipes surroundings including its penetrated roots and making good to the damaged plaster by providing cement mortar (1:3) and finished the surfaces to match with existing surfacescomplete all as specified and as directed. (Cost of materials is deemed to be included within the quoted rate) |
| 78 | M & L for Chemical Cement Grouting Walls cracks with Special grouting materials and cutting "V" shape grooves, removing loose hardened old grout or any type of wastecomplete all as specified and as directed. List of Grouts Ultratech Cement Grout Myk Laticrete Cement Grout Saint Gobain weber cement grout Birla white cement grout |
| 79 | Repairs to Top Cleat / Floor spring of Aluminium door, Tightening of screws completed all as specified and as directed. |
| 80 | Supply and fix Stainless steel Top cleat plate set to Aluminium door including screws complete all as specified and as directed. |
| 81 | Repairs to SS Handles of Aluminium door/ Toughened, Tightening of screws completed all as specified and as directed. |
| 82 | Supply and fix 300-600mm Length Stainless steel Fancy Handle to Aluminium/ Toughened door including screws complete all as specified and as directed. |
| 83 | Supply and fix in repair 304 Grade 25mm Outer dia stainless steel curtain rod of 1mm wall thickness cut to required length complete all as specified and as directed. |
| 84 | Supply and fix in repair 304 Grade Universal Curtain rod brackets One Pair (One pair comprises of Two Pieces, One with closed opening and one with half round opening for laying of Curtain rod as specified in Item no 83 above) of 63mm x 20mm x 1mm wall thickness fixed to wall with Stainless steel Screws complete all as specified and as directed. |
| 85 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chromate primer including preparation of untreated steel surface over 10 cm width or girth, complete all as specified and as directed |
| 86 | Taking down rolling shutter and re-fixing to its original position after cleaning all parts, straighten sliding rails, replacing damaged strips, bottom rails, helical spring as required, greasing/ oiling, servicing for smooth functioning for all parts, including welding etc. rolling shutter push pull or manual type, size n. exc. 10Sqm complete all as specified and directed. Note:- Supply only of parts to be replaced parts shall be measured and paid separately. |
| 87 | All as per Ser. No. 86 above but rolling shutter gear operated type with bevel gear box and cranked handle for smooth function, size exceeding 10Sqm but not exceeding 20Sqm complete all as specified and directed. |
| 88 | Supply only steel sheet 75mm wide lath strip 1.25mm thick for rolling shutters including mild steel clips at either ends duly painted with two coats of synthetic enamel paint (shade to match with the existing) over a shop coat of red oxide primer complete all as specified and directed. |
| 89 | Supply only mild steel spring 75mm to 150mm dia made of high tensile steel wire conforming to IS: 4454 having 60 to 80 helical for smooth working condition for rolling shutters complete all as specified and directed. |
| 90 | Supply only mild steel anchoring rod 50mm dia including necessary fixture for rolling shutters complete all as specified and directed. |
| 91 | M & L for Greasing/ Oiling rolling shutter after cleaning all parts, straighten sliding rails, bottom rails, helical spring as required, servicing for smooth functioning for all parts, etc. rolling shutter, manual type, size n. exc. 10Sqm complete all as specified and directed. |
| 92 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 93 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and as directed |
| 94 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed by the Engineer-in-Charge. |
| 95 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by the Engineer-in-Charge. |
| 96 | Dismantling of fencing wire mesh ofany type and any description complete all as specified and as directed. |
| 97 | Dismantling barbed wire fencing complete all as specified and as directed. |
| 98 | Dismantling stone pitching in portions built in cement mortar including levelling the dismantled area to get the even surface by removing the vegetation etc. complete all as specified and directed. |
| 99 | M&L for 150mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in floors and finishing the surface of concrete by broomingcomplete all as specified and as directed by the Engineer-in-Charge. |
| 100 | M&L for 100mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in floors and finishing the surface of concrete by broomingcomplete all as specified and as directed by the Engineer-in-Charge. |
| 101 | M&L for 50mm thick PCC 1:4:8 type D2 (Using 20mm graded stone aggregate) as in sub floors complete all as specified and as directed by the Engineer-in-Charge. |
| 102 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of grade "B"complete all as specified and as directed by the Engineer-in-Charge. |
| 103 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of grade "B" complete all as specified and as directed by the Engineer-in-Charge. |
| 104 | M&L for chequered designer cement concrete tiles 20 cm x 20 cm x 25 mm/ 30 cmx 30 cm x 25 mmthick, set, jointed and pointed in neat cement slurry in floors with white or grey cement and pigments over 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge. |
| 105 | M & L cement concrete type C-2, 1:3:6 (40mm graded aggregate), 75mm thick as in subbasefloorings complete all as specified. |
| 106 | M&L for Sand filling under floors/Pavement or in foundations including watering and consolidation. |
| 107 | M & L for Rubber moulded, machine pressed ,precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade With Grey Cement . |
| 108 | M&L for boulder pitching, laid dry, hand packed tightly & grouted with cement and sand mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge. |
| 109 | All as per item No. 108 above but except stone. (Note : Stone obtained from Item No 98 to be reused) |
| 110 | M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
| 111 | All as per item No. 110 above but except stone |
| 112 | M&L for Pre-cast cement concrete block masonry as per IS 2185,gradeC5(using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting inCM 1:6 |
| 113 | M&L for base surface preparation by compacting and consolidation and filling of moorum, if required in stone pitching complete as specified and as directed by the Engineer-in-Charge. |
| 114 | M & L for grouting of stone pitching in cement mortar 1:4 including removal of loose mortar & vegetation etc, complete as specified and as directed by the Engineer-in-Charge. |
| 115 | Raking out joints/ pointing filled with loose cement mortar/ cement mortar of random rubble or polygonal rubble uncoursed or brought up to courses or stone pitching built in cement mortar complete all as specified and as directed by the Engineer-in-Charge. |
| 116 | M & L for Flush pointing to Random rubble masonry, uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed. |
| 117 | M&L for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation filling and mass concrete. |
| 118 | M&L for PCC (1:2:4) type B-1 (using 20mm graded aggregate) as in copings and haunchings of Manholes like works, finished even and smooth using extra cementincl necessary form work complete all specified and as directed |
| 119 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished fair and even complete all as specified and as directed by the Engineer-in-Charge. |
| 120 | M & L for RCC (1:1.5:3) Type A1( 20 mm graded stone aggregate) in Foundations, including rafts, footings, plinth beam etc and mass concrete complete all as specified and as directed by Engineer-in-Charge |
| 121 | M & L for RCC (1:1.5:3)Type A1( 20 mm graded stone aggregate)Columns, pillars, piers, posts and struts |
| 122 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 123 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions and finish the surface fair |
| 124 | M & L for TMT steel bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 125 | M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 126 | S&F in repairs PVC pipes of 75 mm bore pipes in any length fixed in Retaining walls/ RR Masonry walls/ Block masonry walls as spout pipes complete all as specified and directed. |
| 127 | S&F mild steel work in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by the Engineer-in-Charge. |
| 128 | S & F galvanised 2 strand steel barbed wire (Hot dipped galvanised) 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securingor tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed. (Note : Each line wire to be measured) |
| 129 | Supply only PVC coated chain link fencing 100 mm x 100 mm and dia 5 mm including PVC coating complete all as specified and as directed. |
| 130 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts etc including provision of binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. Note: Material to be obtained against under item No 129 here in before to be fixed. |
| 131 | S&F 610mm dia. concertina coil, galvanised /precoated with black anti-corrosive paint, weighing approx. 8 Kg per coil of 6-8m stretch and fixing to any type of standard rails, straining bolts etc. including securing or tying at crossings with necessary clips/pins etc. complete all as specified and as directed by the Engineer-in-Charge. |
| 132 | S&F mild steelFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed by the Engineer-in-Charge. |
| 133 | S&Fmild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc. 5cm long complete all as specified and directed by the Engineer-in-Charge. |
| 134 | M&L mild steel round bars 10mm dia and over, as reinforcement. cut to length, bent to shape required including crancking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed. |
| 135 | M & L applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chromate primer including preparation of untreated steel surfaces over 10 cm width or girth, complete all as specified and as directed. |
| 136 | M&L preparing new or previously untreated steel surfaces of any descriptions,n.exc. 10 cm width or girth, when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coatof red oxide/ zinc chrome primer, complete all as specified and as directed. |
| 137 | M & L preparation of old untreated steel surface of any descriptionover 10 cm width or girth andapplying a coat of synthetic enamel, complete all as specified and as directed. |
| 138 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound as per manufacturer"s instructions finishing the surface even and fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge. Note: WPC will be measured and paid separately |
| 139 | Supply only Integral Water Proofing Compound (ISI marked) of approved make. |
| 140 | M&L for preparation of new plastered surfaces and applying two coats of Cement Based Paint over one coat of primer on walls complete all as specified and as directed by the Engineer-in-Charge. |
| 141 | M/L preparation of old surface of wall plastered including cornices and pillasters etc andapplying one coat of cement base paint on wallall as specified and as directed by Engr-in-Charge. |
| 142 | M&L for providing precast RCC 1:2:4 type B1 (Using 20mm graded granite stone aggregate) as in landings, cover slabs (for manholes etc.), chullah hoods, chajjas, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
