Military Engineer Services-MES has published Provision Of Storm Water Drainage System Including Rain Water Harvesting At Neel Bhawan And Kl Zone And Other Sanctioned Works Under Ge ( West ) Ferozepur Cantt. Submission Date for this Tender is 30-11-2023. Drainage Tenders in ferozepur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-11-2023 |
| Sl. No. | Item Description |
| 1 | Excavating in trenchs, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying XLPE cable etc. not exceeding 10Sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Exacavating over areas, not exceeding 1.50 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Exacavating over areas, exceeding 1.50 m but not exceeding 3.00 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 4 | Exacavating over areas, exceeding 3.00 m but not exceeding 4.50 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 5 | Returning, filling, including spreading, levelling, watering and well ramming in layrs not exceeding 25cm in soft/loose soil complete all as specified and directed. |
| 6 | Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 7 | Cutting of vegetation, shrubs, bushes, brushwood and tree not exceeding 30 cm girth etc. and removal upto 50m from the starting point complete all as specified and directed. |
| 8 | Removal of mud, sludge/silt etc. filled in drain including digging and getting out complete to a distance of not exceeding 50m from the starting point complete all as specified and directed. |
| 9 | Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging complete all as specified and directed. |
| 10 | Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 11 | M&L brushing neat cement slurry with 3 Kg of cement per Sqm complete all as specified and directed. |
| 12 | M&L 10mm thick screed in cement mortar 1:3 on brick/concrete of roof surfacefinished even and smooth without using extra cement complete all as specified and directed. |
| 13 | Supply only water proofing compound. |
| 14 | M&L tack coat of industrial bitumen 85/25 @ 1.20 Kilogram per Sqm over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified and directed. |
| 15 | M&L polythene film (transparent) 150 micron with 150mm end & side laps bonded with 80/100 bitumen and laid on roof, complete all as specified and directed. |
| 16 | M&L mud phuska, 80mm thick, average consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified and directed. |
| 17 | M&L brick tiles 40mm thick laid over a 25mm thick layer of mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement as the work proceeds complete all as specified and directed. |
| 18 | All as per ser item No: 17 here-in-before but except tiles. Note: Serviceable tiles retrieved from item No: 09 shall be reused after cleaning. |
| 19 | Raking out joints/pointing to masonry or brick-work in single detached joints for flashing, etc complete all as specified and directed. |
| 20 | M&L flush pointing in cement mortar 1:4 on brick work of drains etc complete all as specified and directed. |
| 21 | M&L flush pointing to roof tiles in cement mortar 1:3 including racking out joints of tiles complete all as specified and directed. |
| 22 | M&L plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) minimum radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, including necessary sloping on roof including formork complete all as specified and directed. |
| 23 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed. |
| 24 | All as per ser item No. 23 here-in-before but exceeding 1.5 Sqm and not exceeding 4.00 Sqm. |
| 25 | M&L factory made pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmX60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. |
| 26 | S&F factory made 35mm thick second class hard wood plain framed, panelled shutters(two panel), with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commencial veneering on both faces. The size of rail and style as per IS:1003 (Part I), Kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 27 | M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. (inner girth shall be measured) complete all as specified and directed. |
| 28 | M&L extra for forming fair finished drain or channel 32.50cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. (inner girth shall be measured) complete all as specified and directed. |
| 29 | M&L cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 30 | M&L RCC pipe 450mm bore class NP-3 laid and jointed complete with collars, laid in trenches, and tested complete all as specified and directed. |
| 31 | M&L PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping, apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating including use and waste of formwork complete all as specified and directed. |
| 32 | M&L PCC 1:4:8, type D2, (using 40 mm graded stone aggregate) as in foundation and mass conrete complete all as specified and directed. |
| 33 | M&L PCC 1:3:6, type C-1( using 20mm graded stone aggregate) as in filling of steel chowkhats complete all as specified and directed. |
| 34 | M&L cement concrete cast-in-situ 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in copings including use and waste of formwork as required complete all as specified and directed. |
| 35 | M&L use and waste of formwork to rough finished flat surfaces of concrete foundations, footings, bases of coulmns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams, and other similar works, vertical or to batter complete all as specified and directed. |
| 36 | M&L use and waste of formwork to fair finished flat surfaces faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc. vertical or to batter complete all as specified and directed. |
| 37 | M&L use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or slopping) for rough finished surface of concrete complete all as specified and directed. |
| 38 | M&L cement concrete design mix M-25 (Design Mix) (using 20 mm graded stone aggregate) foundatios, including rafts, footings, foundation beams, plinth beams, bases for coulmns etc and all other similar works complete all as specified and directed. |
| 39 | M&L cement concrete design mix M-25 (Design Mix) (using 20 mm graded stone aggregate)for walls, retaining walls, basement walls and the like, any thickness, above top of footings including attached pilasters and buttresses and all other similar works complete all as specified and directed. |
| 40 | M&L reinforced cement concrete M-25 (Design Mix) (using 20mm graded crushed stone aggregate) as in roof slab and similar work complete all as specified and directed. |
| 41 | M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and direceted. |
| 42 | M&L mild steel round bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 43 | M&L providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed. |
| 44 | M&L precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) set in cement mortar 1:4 as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 45 | M&L RCC M-20 (Design mix) (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 46 | M&L trial bore of 300 mm dia upto 200 meter depth below ground level in any kind of soil strata including hard stone/ boulder etc complete all as specified and directed. |
| 47 | S&F PVC pipe 160 mm dia class "A" including all necessary fittings complete all as specified and directed. |
| 48 | S&F perforated/slottted PVC pipe 160 mm class "A" including all necessary fittings complete all as specified and directed. |
| 49 | M&L gravel packing including jute as filter media 4mm to 6mm size around PVC pipe complete all as specified and directed. |
| 50 | M&L filling of gravel in RWH pit of size 6mm to 12mm complete all as specified and directed. |
| 51 | M&L filling of gravel in RWH pit of size 2mm to 4mm complete all as specified and directed. |
| 52 | S&F Aluminium alloy, anodised, sliding door bolt 250mm length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed all as complete all as specified and directed. |
| 53 | S&F 150mm extruded Aluminium alloy handle complete all as specified and directed. |
| 54 | S&F 200mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 55 | S&F 150 mm floor door stopper of Aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed. |
| 56 | M&L factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of Zinc chromate primer complete all as specified and directed. |
| 57 | M&L factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of Zinc chromate primer complete all as specified and directed. |
| 58 | M&L factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of Zinc chromate primer complete all as specified and directed. |
| 59 | S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil puttyand glazing clips fixed complete to wooden/steel windownot exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metel frame including punching or drilling out old glazing pins/ spring clips complete all as specified and directed. |
| 60 | S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complet to wooden/steel window not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 61 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as speciifed and directed. |
| 62 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 63 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified and directed. |
| 64 | S&F powder coated of (any colour) Aluminium window, ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding Aluminium frame of approved size, including necessary joining cleats, glazing clips,powder coated Aluminium snap beading, screws, including necessary anodised Aluminium fittings like handles etc completeall as specified as per manufacturers instructions. Note: EPDM Rubber beading/gasket measured and paid seperatley. Make (Aluminium frame): Jindal /Hindalco |
| 65 | S&F EPDM Rubber beading around glass in Aluminium windows /ventilator shutters complete all as specified and directed. |
| 66 | S&F 5.5mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm each pane complete all as specified and directed. |
| 67 | S&F 100 mm long Aluminium mortice lock, vertical type four levers complete all as specified and directed. |
| 68 | S&F125mm extruded Aluminium alloy handle complete all as specified and directed. |
| 69 | S&F 150mm long Aluminium, anodisedbarrel tower bolts of extruded section, complete all as specified and directed. |
| 70 | S&F 100mm extruded Aluminium alloy butt hinges with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed. |
| 71 | S&F hydraulically extruded Aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851mm to 1000mm in width and weight between 61Kg to 80 Kg etc complete all as speciified and directed. |
| 72 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheetcomplete all as specified and as directed. |
| 73 | S&F factory made solid panel PVC door shutter 30 mm thick (style) ( printed with wood grain (colour as approved ) consisting of frame made out of MS tubes for top and bottom rails , MS frame shall be covered with heat moulded wood graincolour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and colour PVC sheet for top rail, lock rail, and bottom rail on either side and as gap insert for top rail and bottom rail . Panelling of prelam PVC sheet used instead of wood grainPVC sheet. Stiles and rails feathered at edges the MS frame welded / sealed to the stiles and rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading complete all as specified and directed. |
| 74 | S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed. |
| 75 | S&F PTMTbutt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed. |
| 76 | S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed. |
| 77 | Demoltion ofbrick work built in cement mortar of any specification and in any position complete all as specified and directed. |
| 78 | M&L brick work with sub class "B" bricks, class designation 100, straight or curved on plan exceeding 6 m in mean radius, built in cement mortar 1:4 including flush pointing in same mortar as the work proceeds complete, all as specified. Make: The cost of bedding mortar layer shall be deemed included in the quoted rate. |
| 79 | M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius complete all as specified and directed. |
| 80 | All as per ser item No. 79 here-in-before but using old bricks retrieved from demolition under item 77 here-in-before including cleaning and removal of mortar from old bricks. |
| 81 | M&L brick work with sub class "B" bricks, class designation 100, in half brick thick walls, straight or curved to any radius, built in cement mortar 1:4 including flush pointing in same mortar as the work proceeds complete all as specified and directed. |
| 82 | Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 83 | M&L 15mm thick rendering on fair surfaces of brick work or concrete surfaces, surfaces finished fair and even without using extra cement, in cement mortar 1:4 complete all as specified and directed. |
| 84 | M&L 15mm rendering/plastering on external surface of the wall of 15mm thick in cement mortar 1:4 on brick wall surfaces finished even and fair complete all as specified and directed. |
| 85 | M&L 10mm thick rendering in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 86 | M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed. |
| 87 | Dismantling of floor hearth and wall tilling including mortar beding and throw rubbish out the premises complete all as specified and directed. |
| 88 | M&L roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed. |
| 89 | M&L non-skid ceramic coloured (colour & shade as approved) tiles of 7 mm to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 90 | S&F vitrified ceramic tiles 10mm thick square/rectangular polished area of each tiles not exceeding 0.36Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade) cement to match over 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 91 | M&L light shade Vitrified tile 10mm thick polished, area of tile not exceeding 0.36 Sqm as in skirting set and jointed in cement slurry over and including 10mm thick screed in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 92 | M&L glazed coloured designer ceramic tiles of size 200mm X 300mm X / 300mm X 450 and 7 mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 93 | S&F machine pressed precast 60mm thick concrete interlocking paver block (M-35) cement concrete tiles with grey cement and no pigment of approved design & pattern as approved by GE, set over & including 50mm sand cushioncomplete all as specified and directed. Note :- Sand cushioning will be measured and paid for seperately under relevant item. |
| 94 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 95 | M&L plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregates) 75mm thick as in sub base of floor complete all as specified & directed. |
| 96 | S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed. |
| 97 | S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed. |
| 98 | Taking up or down 15 mm existing steel tubing and connections and re-fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubingall as specified and as directed. Note: The cost of fitting shall be deemed included in quoted rate. |
| 99 | All as per ser item No. 98 here-in-before but 20mm dia steel tubing. |
| 100 | Demolition of unreinforced cement concrete in ground floor and pavings not exceeding 15 cm thick (below or above GL) complete all as specified and directed. |
| 101 | M&L 50mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed. |
| 102 | S&F 15mm bore pillar tap, cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe as in repair complete all as specified and directed. |
| 103 | S&F bib tap of cast Copper alloy brass 15mm bore, with with fancy type,screwed down screwed for iron pipe or for brass ferrule in repair complete all as specified and directed. |
| 104 | S&F rotational moulded triple layered polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete allas specified and directed. |
| 105 | S&F gun-metal gate valve of 15mm dia with iron wheel head screwed both ends for iron pipe and as fixed in repairs complete all as specified and directed. |
| 106 | S&F gun-metal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe and as fixed in repairs complete all as specified and directed. |
| 107 | S&F 20mm ball brass valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 210 gms) and fixed in repair complete all as specified and directed. |
| 108 | S&F 600mmX450mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 109 | S&F 15mm bore fancy type chromium plated stop cock cast Copper alloy screwed down, high pressure screwed both ends for iron pipe or union of 15 mm bore fixed in repairs complete all as specified and directed. |
| 110 | S&F 15 mm fancy type chromium plated stop cock with long shank and cup (concealed type) screwed down, high pressure with crutch handle both end screwed for iron pipe or union as fixed in repairs complete all as specified and directed. |
| 111 | S&F PVC connection both end brass union and length 450 mm long for 15 mm bore pipe complete all as specified and directed. |
| 112 | S&F 600mm long chromium plated towel rail fixed to wall with steel screws and PVC rawl plug complete all as specified and directed. |
| 113 | S&F chromium plated soap dish oval /square type as fixed in repairs complete all as specified and directed. |
| 114 | S&F vitreous China squatting pan, Orissa pattern size 580mmX440mm white, with integral foot rests including necessary lime concrete and 110mm bore PVC (SWR) "P" trap with 550mm to 600mm long neck for connecting WC to branch piece with cement joints fixed in repair complete all as specified and directed. |
| 115 | S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed. |
| 116 | S&F wash hand basin, flat back 550mmx400mm vitreous China (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed. |
| 117 | S&F chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union in repair complete all as specified and directed. |
| 118 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified and directed. |
| 119 | S&F 110 mmbore PVC (SWR)pipeof pressure not less than 4kg/Sqm in single socketed in any lengthwith rubber ringjointsfixedto walls including distance pieces and stack clamp with nuts & bolts complete all as specified and as directed. |
| 120 | S&F 110 mmbore PVC (SWR)pipeof pressure not less than 4kg/Sqm in single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 121 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed. |
| 122 | S&F 110 mmbore PVC (SWR) bends ad providedwith access doorcomplete all as specified and as directed. |
| 123 | S&F 110mm dia, PVC (SWR) branch piece, single (SingleT) equal or unequal with access door complete all as specified and directed. |
| 124 | S&F PVC (SWR) vent cowl, for 110 mm bore pipe complete all as specified and directed. |
| 125 | S&F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 126 | S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 127 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 128 | S&F hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed. |
| 129 | S&F Gypsum Board 6mm - 7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm, Main tee 38mmX23mm, Sub tee 23mmX23mm) including Aluminium anodised snap grid frame 605mm X 605mm for false ceiling including hanging arrangement complete all as specified and directed. |
| 130 | M&L preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over acoat of pink primer complete all as specified and directed. |
| 131 | M&L preparing new painted steel surfaces of of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 132 | M&L preparation of new plastered surfaces wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 133 | M&L preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 134 | M&L preparation of newly plastered undecorated surfaces of walls & applying three coats coats of white wash complete all as specified and directed. |
| 135 | M&L preparation of newly plastered undecorated surfaces of ceiling & applying three coats of white wash complete all as specified and directed. |
| 136 | M&L washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper all as specified. |
| 137 | M&L washing rubbing down and stopping of cement based painted surface and applying one coat of cement based paint on wall surfaces including proper curing all as specified and directed. |
| 138 | M&L preparing of olddecorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed. |
| 139 | M&L preparing of olddecorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on ceiling including cornices complete all as specified and directed. |
| 140 | M&L preparing old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 141 | M&L Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 142 | Taking down Copper/Aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all specified and directed. |
| 143 | Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB"s (single phase or three phase) of any capacity complete all as specified and directed. |
| 144 | Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing specifications complete all as specified and directed. |
| 145 | M&L point wiring complete with 1100 Volts grade PVC insulated unsheathed FRLS cable of Copperconductor, multi stranded of size 1.5 Sqmm, single core,in and including new rigid non-metallic PVC conealed conduit, with all accessories as required such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheated stranded Copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Pointcontrolled by one single pole one way switch. |
| 146 | (b) One 5 Amps socket outlet same board controlled by one single pole 5 Amps switch |
| 147 | (c) One 5 Amps socket outlet independent board controlled by one single poles 5 Amps switch |
| 148 | All as per ser Item No. 145 here-in-before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sqmm PVC insulated Copper conductor and 2.5 Sqmm Copper conductor for continuous earthing complete all as specified and directed. |
| 149 | S&F modular switch one way6 Amps, 1 module in repair complete all as per specified anddirected. |
| 150 | S&F modular switch one way 16 Amps, 1 module in repair complete all as per specified anddirected. |
| 151 | S&F modular socket, 6 Amps - 2/3 pin combined 2 module in repair complete all as per specified and directed. |
| 152 | S&F modular socket, 6 Amps 16 Amps - 2/3 pin combined 2 module in repair complete all asper specified anddirected. |
| 153 | S&F modular white cover plate including GI box inner, 3 module in repair complete all as per specified & directed. |
| 154 | S&F modular white cover plate including GI box inner, 4 module in repair complete all as per specified & directed. |
| 155 | S&F modular white cover plate including GI box inner, 8 module in repair complete all as per specified &directed. |
| 156 | S&F modular step type regulator,120 Watts - 2 module in repair complete all as specified and directed. |
| 157 | S&F LED tube light fitting 18 Watts, 4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230 Volts, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible Copper conductor cable with suitable size complete all as specified and directed. |
| 158 | S&F LED 2 feet X 2 feet, 36 Watts, 230 Volts recessed mounting luminaires (White/Warm White), complete with all accessories pre-wired and including connecting up with two core 1.5 Sqmm Copper conductor cable complete all as specified and directed. |
| 159 | S&F LED building security light fitting 35 Watt, 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 160 | S&F lamp holder PVC/polycarbonate, isolated with back plate suitable for batten fittings including 10 Watts LED bulb complete all as specified and directed. |
| 161 | Supply and install hi wall split units indoor/outdoor of capacity 1.5 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity including all nessessary fittings/Stand required to fix outer and inner unit, complete all as specified and directed. |
| 162 | Supply and install motor starter upto 32 Amps 230 Volts modular type for AC complete all as specified and directed. Makes: Havells Cat No - AHCSMXW321 or techno-commercially equivalent in approved makes |
| 163 | S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & desined for input variation between 170 Volts to 250 Volts with output voltage stabilized at 230 Volts with accuracy of +-2.5% and of capacity 5 KVA complete all as specifed and directed. |
| 164 | S&F water heater storage type, electric, capacity 25 litres BEE 5 star rated complete all as specified and directed. |
| 165 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230Volts, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 166 | S&F ceiling rose surface type, PVC/polycarbonate, isolated, bakelite 65mm x 50mm, 3 terminals complete all as specified and directed. |
| 167 | S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type) fitted with ABS frame and 415 Volts 200 Amps rated enameled bus bar 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed. |
| 168 | S&F MCCB 4 pole, 415 Volts, 100 Amps, 36 KA, 50 Hz complete all as specified and directed. |
| 169 | S&F sheet metal enclouser SPN DB"s 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 Volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed. |
| 170 | S&F MCB SPN, 40 Amps - 63 Amps, 240 Volts, "B" series, 10KA duly ISI marked, in MCB DB, with connection testing and commissioning complete all as specified and directed. |
| 171 | S&F MCB SP, 6 Amps - 32 Amps, 240 Volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning complete all as specified and directed. |
| 172 | S&F MCB SP, 40 Amps, 240 Volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning complete all as specified and directed. |
| 173 | M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 Sqmm drawn through in and including PVC concealed with 1 x 6 Sqmm PVC insulated Copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed. Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated Copper conductor single core, one run of PVC conduit shall be measured as single run. |
| 174 | S&F sub main wiring of 4 Sqmm PVC insulated unsheathed FRLS cable multistranded Copper conductor with earth wire of 4.0 Sqmm PVC insulated unsheathed FRLS cable multistranded Copper conductor including PVC conduit pipe 25 mm dia in repair complete all as specified and directed. Note:-Two run of single core 4 Sqmm cable and one run single core 4.0 Sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length). |
| 175 | M&L earthing complete with galvanized steel plate elecrode of size60 cm x 60cm and 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 m below the ground level with top edge of earth plate at a depth not less than 1.5 m below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate). The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) and mild steel angle iron 50mm x 50mm x 6mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) |
| 176 | Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed. |
| 177 | M&L sand filling under floors, foundation or cable protection including spreding leveling in layer not exceeding 25cm thick complete all as specified and directed. |
| 178 | M&L bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise across the line of cable in trenches for protection of underground cable complete all as specified and directed. |
| 179 | S&F mild steel galvanised iron pipe light grade, (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e mild steel clamps nuts & bolts etc as required complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
