}

Tender For D/O Village (Maintenance Fo Drain And Precast Rcc Slab Of Drain Village Yakubpur) Noida, noida-Uttar Pradesh

New Okhla Industrial Development Authority-NOIDA has published Tender For D/O Village (Maintenance Fo Drain And Precast Rcc Slab Of Drain Village Yakubpur) Noida. Submission Date for this Tender is 16-11-2023. Drainage Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

40499497
Tender For D/O Village (Maintenance Fo Drain And Precast Rcc Slab Of Drain Village Yakubpur) Noida
Open Tender
Indian
Uttar Pradesh
noida
16-11-2023

Tender Details

D/O Village (Maintenance Fo Drain And Precast Rcc Slab Of Drain Village Yakubpur) Noida

Key Value

Document Fees
INR 2832 /-
EMD
INR 162000.0 /-
Tender Value
INR 80.82 Lakhs /-

BOQ Items

Name of Work: D/o Village (Maintenance fo Drain and Precast RCC Slab of Drain Village Yakubpur) Noida
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. The contractor has to detect different utilities like sewer line, water supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excacvation and shall start excavation only after getting permission of Engineer-in-charge. All kinds of soil
2Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth : consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 m. (CR)
3Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. .DSR-18/I.No-15.60
4Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth 1:4:8 ( 1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
5Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in foundation and plinth inCement mortar 1:4 (1 cement : 4 coarse sand) DSR No. 6.1.1
612 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) (DSR-18/I-13.4.1/P-222)
7Neat cement punning ( DSR- 18/ I- 13.18 )
8Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
9Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
10Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) DAR Code:4.1.3
11Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 cement : 1.5coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) DAR Code:4.1.2
12Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required . In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail