}

Tender For Supply, Erection And Commissioning Of 150 Hp Vertical Turbine Motor Pump Set At Srirangam Collector Well In Alavandhar Padithurai Head Works., tiruchirappalli-Tamil Nadu

Municipal Adminitration And Water Supply Department-MAAWSD has published Tender For Supply, Erection And Commissioning Of 150 Hp Vertical Turbine Motor Pump Set At Srirangam Collector Well In Alavandhar Padithurai Head Works.. Submission Date for this Tender is 24-11-2023. Motor Work Tenders in tiruchirappalli Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

40485232
Tender For Supply, Erection And Commissioning Of 150 Hp Vertical Turbine Motor Pump Set At Srirangam Collector Well In Alavandhar Padithurai Head Works.
Open Tender
Indian
Tamil Nadu
tiruchirappalli
24-11-2023

Tender Details

Tender For Supply, Erection And Commissioning Of 150 Hp Vertical Turbine Motor Pump Set At Srirangam Collector Well In Alavandhar Padithurai Head Works.

Key Value

Document Fees
Refer document
EMD
INR 120000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:Supply, Erection and Commissioning of 150 HP Vertical turbine motor pump set at Srirangam Collector well in Alavandhar padithurai Head works.
Sl. No. Item Description
1Supply and delivery of vertical water lubricated statically, dynamically, hydraulically balanced typeturbine pump capable of discharging 15000 lpm against a total head of40 MWC with the following accessories like suction strainer,head shaft,Line shafts, Rubber line shaft bearing , bearing retainer andSuitable column pipes. TheBowl assembly shall be with bronze impeller including M S Clamp set and Spannerone set . etc complete. . 15000 Lpm x 40m turbine pump. Note : Note : Sl 5 -well depth 21 - 7 = 14 mtrs/ 1.5 = 9.33 Nos1705000 *7.5% = 127875.00 * 9.33 = 1193500.00
2Supply and delivery of vertical hallow shaft squirrel cage induction motor 1500 Rpm suitable for above Pumpset for continuous rated SPDP class F insulation confirming to 1S 325 for operation in AC 3 phase – 50Hz -( + 5%) 415 v ( + 10%) running with a speed of pump noted above and with inbuilt thrust bearing assembly capable of taking up the entire load and non reverse ratchet assembly etc. complete. The motor rating as noted above is the minimum and shall be such that it should whenever be over loaded and when the pump works at MWL condition and shall be of 10% over and above the maximum HP absorbed by the pump.The motorshould be energy efficiencyto have maximum efficiency at higherpower factor.etc complete.
3Supply,Fabrication and fixing of 6mm thick 300mm dia M.S pipes and specials,with suitable flanges including cutting ,welding ,grinding, transportationchargesandtwo coats painting using with best synthetic anticorrosive enamel pant, over one coat of red oxide paint etc, complete
4Supply of 16 mm to25 mmdia and 50mm to 150 mm length of MS bolt & nut includingtwo plate washers and one spring washer for fabricated6mm thick 300mm dia M.S pipes. etc, complete
5Supply of6mm to 12mm rubber insertion sheet at site etc, complete
6Removal of existing 75 HP squirrrel cage induction motor pumpset with soft starter, panel board and connected accssories such as terminal box , cables, bedframes, butterfly valve, non return valve and delivery line including safely handed over to head water works storesandbreaking the motor foundation where evernecessary suitable for erection of new 150 HP motor pump set, without damaging the pumping main as directed by the departmental officers( Including GST )
7Supply and delivery of floor mounted soft starter of air cooled FCMA type suitable for the 150 HP squirrel cage induction motor for operation in AC 3 phase – 50HZ - ( + 5%) 415V ( +10%)The starter should have under voltage, over load relay with suitable ammeter indication lamp etc. including cost of all materials and F.O.R at siteetc, completeas directed by the departmental officers
8Supply and delivery of floor mounting type weather vermin and dust proof powder coated LT cubical panel board made of 14 guage –MS sheet and MS angle iron frame work with enclosed 4 Nos copper bus bars of Electrolyte grade E-91PVC sleeved of suitable size for phase and neutral with hinged front door and with railway type lock and key arrangements. The bus bars shall be of ample current carrying capacity with all internal wiring as per I.E rules and as per IS 8633 and as per safety requirement of CEIG.The design of panel board should facilitate for quick operation of all switches from the front side. including with necessary twin copper earthing arrangementsand consists of the components for controlling incoming and outgoing supply etc. Incomer : 1 No - 800 amps Air circuit breaker Out going : 3 Nos - 400 amps MCCB 2 Nos - 100 amps TPN fuse switch2 Nos -63 amps MCB Metering : 0-500 V digital volt meter, 0-750 amps digital ammeter 800 / 5A - CTs, volt meter ANDammeterselector switches 5 Nos indication lamps andcontrol fuses 1 No -earth fault relay Bus bar : 700 amps rating copper flat Neutral : 350 amps rating copper flat
9Erection, Testing and commissoning of the above equipments including a trial run of motor pumpsetas directed by the departmental officers. etc, complete.( Including GST )
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail