Delhi University has published Tender For Repair Of Flooring, Wooden Cupboard, Toilet Bathroom Fittings, Finishing And Allied Work At 9-A/5 Ground And First Floor Wea Karol Bagh, University Of Delhi.. Submission Date for this Tender is 09-11-2023. Toilet Bathroom Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 6 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 7 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62X19 mm |
| 8 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineerin- charge. |
| 9 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos emulsifiable concentrate of 20% |
| 10 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. |
| 11 | Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 13 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 15 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 17 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 19 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 20 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 21 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 22 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 23 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 24 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 25 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 26 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 27 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 28 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap |
| 29 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 30 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes |
| 33 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 34 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 36 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 37 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks |
| 38 | P/Fwooden cupboard of depth upto 450 mm with shelves, top, bottom, sides & shutters with19 mm thick commercial board (Duro/ Centuary or equivalent)and cover with 1 mm thick laminate i/c 6 mm thick commercial ply (Duro/ Centuary or equivalent) on back, teak wood beading on edges, multipurpose lock, polishing and painting etc all complete as per direction of Engineer-in-charge (Measurement will be made for front portion only) |
| 39 | Providing and fixing 0.80 mm thick aluminium sheet over the door withnails and screws and washer etc. complete in all respect as per direction of Engineer in-charge. |
| 40 | P/F stainless steel pipe/ curtain rods with brackets / side funnels of size upto 25 mm dia pipe (heavy type) with necessary screws etc all complete. |
| 41 | Providing and fixing door sealing strip with necessary nails, screws etc. complete : as per direction of Engineer in-charge. |
| 42 | Providing and fixing C.P. brass angle valve 15 mm nominal bore (Cera make) cat no. F2008201 |
| 43 | Providing and fixing C.P. brass bib cock of approved quality (Cera make or equiavlent F2008151 Bib cock with wall flange) as per direction of Engineer-in-charge |
| 44 | Providing and fixing CP brass two way bib cock of approved quality (Cera make) cat no. F2002163 complete.in all respect. |
| 45 | P/F hand shower (Health Facuet)(ABS Body) with 8 mm dia 1 meter longflexible tube and wall hook(Cera make) cat no.F8030107AB or equivalent make complete.in all respect. |
| 46 | P/F CP brass wall mixer of approved quality with necessary taflon tape, washer etc all complete.Cera make QT F2006404 HT F3001404 Wall mixer with telephonic shower arrangement |
| 47 | Providing and fixing CP brass shower (Cera make) cat no. F-7020108AB overhead shower 80 mm dia with 200 mm long shower arm and wall flange etc complete.in all respect. |
| 48 | P/F 15 mm CP brasspillar cock 290 mm extended body and aerator (Cera make Cat no. F1015102). |
| 49 | P/F CP brass Towel rail 600 mm (24”) of (Cera make) with necessary nails, screws etc complete. |
| 50 | P/F CP brass Towel rack of (Cera make F5007101) with necessary nails, screws etc complete. |
| 51 | P/F PVC bathroomcorner with necessary nails, screws etc complete. |
| 52 | P/F CP brass towel ring of (Cera make F5007105) with necessary nails, screws etc complete. |
| 53 | Providing and fixing stainless steel shelf, supported on SS angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 54 | P/F CP glass Tumbler holder of (Cera make F5002107) with necessary nails, screws etc complete. |
| 55 | Providing and fixing CP brass two way bib cock of approved quality (Cera make) cat no. F2002163 complete.in all respect. |
| 56 | Repairing the steel gate / BRC cage / window by welding providing MS flat locking arrangement etxra complete as per direction of Engineer in-charge. |
| 57 | Providing and fixing stainless steel tower bolts, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 58 | P/F modular unit under the hitch shelf with S.S basketrunning over the channel set with necessary screws, nails, fevicol etc complete. The channles, basket etc should be as per approved design givem by Engineer in-charge. |
| 59 | P/F19 mm thick Commercial board cupboard shutter with second class teck wood frame necessary board shelves, sunmica on front face shutter, painted from inside with necessary brass handles / knob hinges, megnet catcher etc i/c painting and polishing etc. complete(Measurement will be made of front portion only) |
| 60 | P/F CPVC ball valve 20 mm dia.(Supereme make or equiavlent) of approved quality |
| 61 | Charges for disconnecting and loading / unloading the PVC water storage tank500 to 1000 ltr capacity from terrace to Engineering store Maurice Nagar as directed by engineer-in-charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
