Bids Are Invited For General Repair To Residential Bldg In Manora Peak Phase-I At Aries, Nainital-1 Demolishing cement concrete manually/by mechanical means nominal concrete 1:4:8 or leaner mix (i/C equivalent design mix) including disposal of material within 50 metres lead as per direction of Engoineer-in charge Cum 10 2 Demolishing brick work in cement mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer - charge. Cum 5 3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Cum 5 4 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm Sqm 375 5 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed Sqm 200 6 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Sqm 30 7 Dismantling 15 to 40 mm dia GI pipe including stacking of dismantled piles(within 50 meters lead) as per direction of Engineer-in-Charge on exposed wall surface complete all specified and directed by Engr-in-charge. Metre 300 8 Taking out doors, windows and clerestory windows shutter with chowkats of area 3 sq metres and below (steel or wood) including stacking within 50 metres lead complete all as specified and directed . Each 20 Name of Work :General repair to residential bldg in Manora Peak PHASE-I at ARIES, Nainital Station : ARIES Nainital 9 Taking out doors, windows and clerestory windows shutter with chowkats of area beyond 3 sq metres (steel or wood) including stacking within 50 metres lead complete all as specified and directed . Each 25 10 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) Sqm 200 11 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) Sqm 200 12 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil. Cum 10 13 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) complete all as specified and directed Cum 4 14 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) Cum 8 15 Reinforced cment concrete work in walls(ant thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five levle, excluding cost of centering, shuttering, finishing and reinforecemet 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) Cum 5 16 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. ThermoMechanically Treated bars of grade Fe 500D or more. Complete all as specified and directed Kg 400 17 Centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, plinth beams, cooking platform ,girders complete all as specified and directed. Sqm 60 18 Centering and shuttering including strutting, propping etc. and removal of form for : edges of slabs and breaks in floors and under 20cm wide complete all as specified and directed. Metre 100 19 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed Cum 10 20 -Ditto all as per item No 19above but except brick. Cum 5 21 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) complete all a specified and directed. Cum 5 22 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 20 23 Providing and fixing MS Tubular frames for doors, windows ventlators and railing with square/rectangular/Ltype sections,,joints mitred, welded and grinded finish, with profile of required size including fixing of necessary screws and applying a priming coat complete all as specified and direted. Kg 600 24 Providing and laying Ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Sqm 125 25 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sqm 250 26 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 10 27 Providing and fixing in repairs white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid complete all as specified and directed. Each 10 28 Providing and fixing in repairs wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Each 20 29 Providing and fixing in repairs white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittingscomplete all as specified and directed. Each 20 30 Providing and fixing in repairs white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm complete all as specified and directed. Each 5 31 Providing and fixing in repairs white vitreous china pedestal type (European type/ wash down type) water closet pan with seat cover complete all as specified and directed.. Each 5 32 Providing and fixing in repairs 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Each 30 33 Providing and fixing in repairs P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White Each 10 34 Providing and fixing in repairs CP Brass Single lever wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia Each 20 35 Providing and fixing in repairs P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia Each 40 36 Providing and fixing in repairs 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 30 37 Providing and fixing in repairs toilet paper holder : C.P. brass fixed with screw to wall complete all as specified and directed. Each 20 38 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe concealed. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20mm nominal outer dia Pipes Metre 250 39 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore Metre 20 40 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore Metre 13 41 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore Metre 12 42 Providing and fixing in repairs 15 mm nominal bore CP brass bib cock of approved quality conforming to IS : 8931complete all as specified and directed. Each 40 43 Providing and fixing in repairs15mm nominal bore CP brass angle valve of approved quality conforming to IS: 8931 complete all as specified and directed. Each 100 44 Providing and fixing in repairs ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore complete all as specified and directed. Each 1 45 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 nominal bore complete all as specified and directed. Each 1 46 Providing and fixing brass stop cock 15 mm nominal bore complete all as specified and directed by Engr -incharge. Each 1 47 Providing and fixing gun metal gate valve 20 mm nominal bore with CI wheel of approved quality (screwed end) complete all as specified and directed by Engr -incharge. Each 1 48 Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore complete all as specified and directed. Each 40 49 Providing and fixing in repairs C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter complete all as specified and directed Each 20 50 Providing and fixing in repairs stainless steel A ISI 304 (18/8) kitchen sink without drain board 610x510mm bowl depth 200mm as per IS : 13983 with CI brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required complet all as specified and directed. Each 20 51 Providing and fixing stainless steel wall mounted gloss finish kitchen plate rack of size 750x900x250mm and thicknes shall not be less than 1 mm of superior quality fixed to wall complete all as specified and directed. Each 20 52 Providing and fixing in repairs CP towel rail 600mm long complete with brackets fixed to wooden cleats, CP brass screws with concealed fitting arrangement of approved quaility complete all as specified and directed. Each 20 53 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fastlugs or with dash fasteners of required dia & length (hold fast lugs ordash fastener shall be paid for separately). Sal wood Cum 0.5 54 Providing and fixing 35mm thick shutters second class teak wood panelled or panelled and glazed shutter for doors, windows and clerestory window, fixing with but hinges of required size with necessary screws, as per direction of Engineer-in-Charge(Note :- Butt hinges and necessary screws shall be paid separately)) Sqm 15 55 Providing and fixing 35mm thick glazed /gauzed shutters of second class teak wood for doors, windows and clerestory window using 4mm thick float glass panes/0.63mm dia galvanised wire mesh and aperture 1.4mm including ISI marked M.S pressed butt hinges finished of required size with necessary screws. Sqm 10 56 Providing and fixing 30mm thick glazed shutters of second class teak wood for doors, windows and clerestory window using 4mm thick float glass panes/0.63mm dia galvanised wire mesh and aperture 1.4mm including ISI marked M.S pressed butt hinges finished of required size with necessary screws. Sqm 10 57 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes complete all a specified and directed Sqm 15 58 Providing & fixing galvanised MS wire gauze with 0.63mm ia and 1.4mm aperture on both side to window, clerestory windows & doors with MS flat 15x3 and nuts & bolts complete all a specified and directed Sqm 15 59 Providing and fixing ISI marked M.S.butt hinges 125x65x2.12mm bright finished with necessary screws etc complete all as specified and directed. Each 24 60 Providing and fixing aluminium sliding door bolts 300x16mm, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent of dyed to required colour or shade, with nuts and screws etc complete all as specified and direted. Each 8 61 Providing and fixing aluminium tower bolts bolts 200x10mm, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent of dyed to required colour or shade, with nuts and screws etc complete all as specified and direted. Each 40 62 Providing and fixing aluminium tower bolts bolts 100x10mm, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent of dyed to required colour or shade, with nuts and screws etc complete all as specified and direted. Each 32 63 Providing and fixing aluminium handle 125mm, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent of dyed to required colour or shade, with nuts and screws etc complete all as specified and direted. Each 32 64 Providing and fixing aluminium handle 100mm, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent of dyed to required colour or shade, with nuts and screws etc complete all as specified and direted. Each 32 65 Providing and fixing in repairs ISI marked oxidized M.S.sliding door bolts with nuts and screws etc. complete : 300x16 mm Each 5 66 Providing and fixing in repair ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : 250x10 mm Each 5 67 Providing and fixing in repairs ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm Each 5 68 Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc complete Each 20 69 Providing and fixing acrylic bathroom corner superior quality having three selves 200mm 250mm and 300mm fixed to wall with screw complete all as specified and directed by Engr- in -charge Each 20 70 Providing and fixing stainless steel wall hook heavy duty having 5 nos hooks for hanging cloth fixed to wall with screw complete all as specified and directed by Engr- in -charge Each 20 71 Providing and fixing PTMT liquid soap dish 125x112mm wide, of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms. Each 20 72 Supplying and fixing 6mm thick waterproof ply fixed to ceiling with screw fillets complete all as specified and directed. Sqm 30 73 Supplying and fixing new wooden fillets hollock wood fillets fixed with screw complete all as specified and directed. Metre 100 74 Providing and fixing factory made ISI marked Box type steel glazed and gauzed windows side/top/centre hung, with beading all membes complete standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, square guard bar of 10mm including providing and ficing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design,(sectional weight of only steel members shall be measured for payment , glass panes and wire mesh shall be paid separately. Kgs 800 75 Painting with synthetic enamel paint to wooden surface of approved brand and manufacture of required colour to give an even shade to wooden surface : two or more coats on new work over a coat of wooden primer of approved brand complete all as specified and directed. Sqm 200 76 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame Metre 190 77 Providing and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for orming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate or panels conforming to IS: 14856, including fixing to frames. Sqm 60 78 Providing and fixing in repairs brass curtain rods of wall thickness 1.25 mm with two brass brackets,two nos side ball fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. Metre 150 79 Applying and finishing wall with exterior weather coat paint of required shade with (two or more coat applied @ 1.67 ltr/10 Sqm) over and including 1 mm thick weather coat putty and priming coat of exterier primer applied @ 2.2 Kg/10 Sqm)(APEX ULTIMA) on wall surface complete all as specified and directed by Engrin-Charge Make : ASIAN Sqm 300 80 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work including 1mm thick putty complete all as specified and directed. Sqm 200 81 Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) including 1mm thick putty complete all as specified and directed by Engr-incharge Sqm 500 82 Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface in old surface including 1mm thick putty complete all as specifieda an directed by Engr -in-Charge. Sqm 600 83 Providing an fixing Powder coated aluminium ventilator comprising froasted glass, stainless steel wire mesh,holding stay for smooth functiong and opening 12x12 for exausr fan complete as per site requirement and as specified and direted by Engr -In-Charge. Sqm 16 84 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerincharge. (Old CC paver blocks shall be supplied by the department /obtained from demolition free of cost). Sqm 30 85 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. Sqm 50 86 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 6 87 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 500 88 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. Each 6 89 Making soak pit 2.5m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 7.5 and S.W. drain pipe 100mm diameter, 1.8m long complete as per standard design complete all as specified an direted. Each 1 90 Excavation holes more than 0.04 cum & upto 0.50 cum including getting out the excavated soil, then returning the soil as required layers in all kind of soil complete all as specified and directed. Each 60 91 Providing and laying in position cement concrete of1:2:4(1 cement:2 coarse sand :4graded stone afggregate) in post holes Cum 3 92 Stuctural steel work in single section, fixed with or withot connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Kgs 300 93 Painting with synthetic enamel paint to steel surface of approved brand and to give and even shade two or more coats over a coat of primer on new work complete all as specified Sqm 300 94 Providing an fixing Nahani trap complete as per site requirement and as specified and direted by Engr -InCharge. Each 2 95 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 80 96 Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge. Sqm 45 97 Providing and fixing stainless steel fancy handle 200mm long of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. Each 64 98 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-incharge. Each 64 99 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc.complete as per directions of Engineer- in-charge. One set 32 100 Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) Kg 200 101 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 75mm diameter Metre 10 102 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 110 mm diameter Metre 100 103 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm Each 2 104 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm Each 2 105 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm Each 2 106 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°- 75 mm bend Each 2 107 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°- 110 mm bend Each 2 108 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.75 mm Each 4 109 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm Each 4 110 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. vent coal 110mm . Each 2 111 Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Svent coal 75mm .
