Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #40449335

Tender For Addition/Alteration To Existing Sewerage Line, Manhole , Soakage Pits Of Jco/Ors Md Accn Of 25 Assam Rifles At Jalukie.

Issued by Statutory Bodies & Commissions/Committees · jalukie, Nagaland
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Nov 2023
0 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
jalukie → Nagaland
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Addition / Alteration To Existing Sewerage Line, Manhole , Soakage Pits Of Jco / Ors Md Accn Of 25 Assam Rifles At Jalukie.

BOQ

Name of Work : Addition/Alteration to existing Sewerage line, manhole , soakage pits of JCO/ORs md accn of 25 Assam Rifles at Jalukie.
Sl. No. Item Description
1SCHEDULE ‘A’ PART - I (Sewerage line, manhole , soakage pits)
2Dismantling of old plaster or skirting raking out joints and clearing the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead.
320 mm thick cement plaster of mix 1:4 (1 cement : 4 coarse sand).
4Providing and laying unplasticized rigid PVC 150 mm dia soil, waste/sewage pipes of composite pressure pipe of approved quality including all special fittings of composite material (engineering plastic blend whenever required) e.g elbows, tees, reducers, couplers & connectors etc with trenching, refilling testing of joints and connection of sewage pipe line with man hole/soak pit/septic tank if required incl necessary plaster with cement morter 1:4 mix complete as perdirection of engineers in charge and removing the existing broken/blockage sewage pipes lines lay digging and refilling the same
5Providing and lying in position cement concrete of specifically grade ex-cluding the cost of cantering and shuttering – all work up to plinth level 1:3:6, ith store aggregate 20mm nominal size for sewage line
6Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to 15 : 7231 with all fittings and fixtures complete, 10 ltr capacity white .
7Providing and fixing 600x450mm bevelled edge mirror of superior glass(of approved quality complete with cp brass screws and washers complete.
8Providing and fixing 600x120x5mm glass self with edge round off supported on anodised aluminium angle frame with cp brass brackets and guard rail complete fixed with 40mm long screws raw plugs etc complete.
9Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete 40mm dia.
10Providing and fixing of un plasticised PVC connection pipe with brass union 45 cm long 15mm bore.
11Providing and fixing of CP brass bib cock 15mm dia.
12Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
13Providing and fixing of CP brass angle value 15mm nomnal bore.
14Providing and fixing of CP brass stop cock(Concealed) 15 mm nominal bore.
15Providing and fixing of CP brass shower rose with 15 or 20 mm inlet,100mm dia.
16Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping sand paperingand preparing the surface smooth including necessary repairs to scratches etc complete in walls and ceiling.
17Distempering with oil bound washable distemper of approved brand and manufacturer to give and even shade on old work (one or more coats).
18Finishing wall with premium Acrylic smooth exterior pain with silicone additives if required shade on old works (two or more coats applied @ 1.43 ltr/10 sqm) over existing cement paint surface.
19Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade, one or more coats on old works.
20Painting with aluminium paint of approved brand and manufacture to give an even shade, one or more coats on old works.
21Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 12.5mm size aggregate
22Extra for providing and mixing water proofing material.
2320mm thick plaster finished with a floating coat of neat cement mix 1:3,
24Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS :1322 (Hessian based self finished bitumen felt) , sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete.
25Renewing glass panes, with putty and nail wherever necessary including racking out the old putty, 4mm thick float glass panes.
26Renewal of old putty glass panes
27Providing and fixing 15mm nominal bore GI union in existing GI pipe including cutting and threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required.
28Providing and fixing 20mm nominal bore GI union in existing GI pipe including cutting and threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required.
29Providing and fixing 25 mm nominal bore gun metal gate value with CI wheel of approved quality (Screwed end).
30Providing and fixing 40 mm nominal bore gun metal gate value with CI wheel of approved quality (Screwed end).
31Providing and fixing ball value(brass) of approved quality high or low pressure with plastic bloats complete 20 mm nominal dia.
32Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
33Supply and fixing Steel reinforcement for RCC work including strainghtening, cutting bending place in position and binding all complete upto plinth level, with TMT bar.
34Making soak pit 2.5m dix meter 3.0m deep with 45x45 cm dry brick honey comb shaft with bricks and SW drain pipe 100m diameter 1.8m long complete as per standard design with common burnt clay FPS (non modular) bricks of class designation 7.5.
35Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

AI Tender Summary

OUR REF NO 40449335
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 20-11-2023
Authority
Authority Name Assam Rifles
Work Description Addition / Alteration To Existing Sewerage Line, Manhole , Soakage Pits Of Jco / Ors Md Accn Of 25 Assam Rifles At Jalukie.
Basic Detail
Tender No I.15032/NIT/Engr/6 Sect AR/2023-24/61
Bidding Type Tender
Location
City jalukie
State Nagaland
Key Dates
Publish Date 01 Nov 2023
Submission Date 20 Nov 2023
Open Date 21 Nov 2023
Finance
Tender Value Ref. Documents
Tender Fee 1000
EMD 1.25 Lakhs
Exemption Not Available
Document List
51ad7c6b-dc6d-4b05-92a6-f087edaf2573.html
BOQ_818750.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 01, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 21, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

51ad7c6b-dc6d-4b05-92a6-f087edaf2573.html

xls

BOQ_818750.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders